Impact of biodiesel bulk modulus on injection pressure and injection timing. The effect of residual pressure

As the demand for energy rises fossil fuel reserves are depleted daily, increasing the interest in alternative fuels. Biodiesel is one of the best candidates in this class and its use is expected to expand rapidly throughout the world. Numerous researchers have been investigating how biodiesel affects combustion, pollutant formation and exhaust aftertreatment. There is general agreement that its combustion characteristics are similar to those of standard diesel fuel, except for a shorter ignition delay, a higher ignition temperature, and greater ignition pressure and peak heat release. Engine power output is similar with both fuels. As regards emissions, reductions in particulate matter (PM) and carbon monoxide (CO) and increases in nitrogen oxides (NOx) are described with most biodiesel blends. The latter is referred to as the 'biodiesel NOx effect'. The vast majority of researchers who explored the effect of biodiesel did so in mechanical injection engines. They found that the primary mechanism by which biodiesel increases NOx emissions is by an inadvertent advance in the start of injection timing, caused by a higher modulus and viscosity. However, more recent studies show that NOx emissions also increase in biodiesel-fuelled common rail engines, and that in some cases they actually decrease in engines with mechanically controlled fuel injection systems. This cannot be explained solely by differences in compressibility and remains an open question. The present study provides a contribution to the discussion in this field by describing a new method to evaluate the injection advance in engines with mechanically controlled pumps. The experimental data show that the advances in the start of injection timing, using biodiesel rather than mineral diesel, are smaller than those calculated with standard methods and may even not occur at all, depending on injection system design. In addition, they demonstrate that, contrary to common belief, injection pressure does not always increase when using biodiesel. These data may help explain why some researchers have found similar or even reduced NOx emission also with mechanical injection systems. (C) 2010 Elsevier Ltd. All rights reserved.