相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Thermoset nanocomposites from waterborne bio-based epoxy resin and cellulose nanowhiskers
Guo-min Wu et al.
CARBOHYDRATE POLYMERS (2015)
Effect of temperature and hybridisation on the low velocity impact behavior of hemp-basalt/epoxy composites
C. Suresh Kumar et al.
COMPOSITE STRUCTURES (2015)
Pristine and amino functionalized carbon nanotubes reinforced glass fiber epoxy composites
Mohit Garg et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
The voids formation mechanisms and their effects on the mechanical properties of flax fiber reinforced epoxy composites
Yan Li et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Improved mechanical properties of an epoxy glass-fiber composite reinforced with surface organomodified nanoclays
G. J. Withers et al.
COMPOSITES PART B-ENGINEERING (2015)
The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy composites
V. Fiore et al.
COMPOSITES PART B-ENGINEERING (2015)
Biobased epoxy thermosets from vanillin-derived oligomers
Maxence Fache et al.
EUROPEAN POLYMER JOURNAL (2015)
Dielectric analysis of the interfacial polarization of alkali treated woven flax fibers reinforced epoxy composites
A. Triki et al.
JOURNAL OF ELECTROSTATICS (2015)
Fabrication, characterization and modelling of laminated composites based on woven jute fibres reinforced epoxy resin
Hind Abdellaoui et al.
MATERIALS & DESIGN (2015)
Effect of layering sequence and chemical treatment on the mechanical properties of woven kenaf-aramid hybrid laminated composites
R. Yahaya et al.
MATERIALS & DESIGN (2015)
Study of effect of fibre volume and dimension on mechanical, thermal, and water absorption behaviour of luffa reinforced epoxy composites
K. Anbukarasi et al.
MATERIALS & DESIGN (2015)
The effect of metal oxide decorated graphene hybrids on the improved thermal stability and the reduced smoke toxicity in epoxy resins
Xin Wang et al.
CHEMICAL ENGINEERING JOURNAL (2014)
Effect of chemical treatments on transverse thermal conductivity of unidirectional abaca fiber/epoxy composite
Ke Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Tailoring the vibration damping behaviour of flax fibre-reinforced epoxy composite laminates via polyol additions
Marie-Joo Le Guen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Lateral crushing of empty and polyurethane-foam filled natural flax fabric reinforced epoxy composite tubes
Libo Yan et al.
COMPOSITES PART B-ENGINEERING (2014)
Effect of graphene nanosheets on morphology, thermal stability and flame retardancy of epoxy resin
Shan Liu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Tensile properties of kenaf fiber due to various conditions of chemical fiber surface modifications
Reza Mahjoub et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Nanocellulose-Based Composites and Bioactive Agents for Food Packaging
Avik Khan et al.
CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2014)
Bisphenol A - Sources, toxicity and biotransformation
Jaromir Michalowicz
ENVIRONMENTAL TOXICOLOGY AND PHARMACOLOGY (2014)
Vanillin, a promising biobased building-block for monomer synthesis
Maxence Fache et al.
GREEN CHEMISTRY (2014)
Tension-tension fatigue behaviour of woven hemp fibre reinforced epoxy composite: A multi-instrumented damage analysis
Davi S. de Vasconcellos et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Properties evolution of flax/epoxy composites under fatigue loading
Shaoxiong Liang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Mechanical performance of woven kenaf-Kevlar hybrid composites
R. Yahaya et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)
Biomechanical fatigue analysis of an advanced new carbon fiber/flax/epoxy plate for bone fracture repair using conventional fatigue tests and thermography
Zahra S. Bagheri et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)
Evaluation of mechanical properties of banana and sisal fiber reinforced epoxy composites: Influence of glass fiber hybridization
V. P. Arthanarieswaran et al.
MATERIALS & DESIGN (2014)
Influence of date palm fibre and graphite filler on mechanical and wear characteristics of epoxy composites
A. Shalwan et al.
MATERIALS & DESIGN (2014)
Static and dynamic mechanical properties of Arundo Donax fillers-epoxy composites
V. Fiore et al.
MATERIALS & DESIGN (2014)
Hot compaction and mechanical properties of ramie fabric/epoxy composite fabricated using vacuum assisted resin infusion molding
Yizhuo Gu et al.
MATERIALS & DESIGN (2014)
Studies on mechanical, thermal and dynamic mechanical properties of untreated (raw) and treated coconut sheath fiber reinforced epoxy composites
S. M. Suresh Kumar et al.
MATERIALS & DESIGN (2014)
Effect of geometry on crashworthiness parameters of natural kenaf fibre reinforced composite hexagonal tubes
M. F. M. Alkbir et al.
MATERIALS & DESIGN (2014)
Evaluation of mechanical and thermal properties of banana-flax based natural fibre composite
V. S. Srinivasan et al.
MATERIALS & DESIGN (2014)
Synthesis of maleimido-substituted aromatic s-triazine and its application in flame-retarded epoxy resins
Yongzhen Wang et al.
POLYMER DEGRADATION AND STABILITY (2014)
Novel cyclotriphosphazene-based epoxy compound and its application in halogen-free epoxy thermosetting systems: Synthesis, curing behaviors, and flame retardancy
Huan Liu et al.
POLYMER DEGRADATION AND STABILITY (2014)
Pyrolysis route of a novel flame retardant constructed by phosphaphenanthrene and triazine-trione groups and its flame-retardant effect on epoxy resin
Lijun Qian et al.
POLYMER DEGRADATION AND STABILITY (2014)
Fabrication and Property Evaluation of Banana-Hemp-Glass Fiber Reinforced Composites
R. Bhoopathi et al.
12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014) (2014)
The Effects of Alkalized and Silanized Woven Sisal Fibers on Mechanical Properties of Natural Rubber Modified Epoxy Resin
S. Srisuwan et al.
11TH ECO-ENERGY AND MATERIALS SCIENCE AND ENGINEERING (11TH EMSES) (2014)
Tensile and impregnation behavior of unidirectional hemp/paper/epoxy and flax/paper/epoxy composites
G. Lebrun et al.
COMPOSITE STRUCTURES (2013)
Effect of water absorption on the mechanical properties of nanoclay filled recycled cellulose fibre reinforced epoxy hybrid nanocomposites
H. Alamri et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Effect of flax fibres individualisation on tensile failure of flax/epoxy unidirectional composite
Guillaume Coroller et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Influence of hygrothermal ageing on the damage mechanisms of flax-fibre reinforced epoxy composite
Daniel Scida et al.
COMPOSITES PART B-ENGINEERING (2013)
Study on the mechanical properties and thermal properties of jute and banana fiber reinforced epoxy hybrid composites
M. Boopalan et al.
COMPOSITES PART B-ENGINEERING (2013)
Effect of surface modification of bamboo cellulose fibers on mechanical properties of cellulose/epoxy composites
Tingju Lu et al.
COMPOSITES PART B-ENGINEERING (2013)
Mechanical property evaluation of sisal-jute-glass fiber reinforced polyester composites
M. Ramesh et al.
COMPOSITES PART B-ENGINEERING (2013)
Multi-functionalization of gallic acid. Synthesis of a novel bio-based epoxy resin
Chahinez Aouf et al.
EUROPEAN POLYMER JOURNAL (2013)
Impact damage characteristics in reinforced woven natural silk/epoxy composite face-sheet and sandwich foam, coremat and honeycomb materials
A. U. Ude et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2013)
Evaluation of mechanical properties of abaca-jute-glass fibre reinforced epoxy composite
B. Vijaya Ramnath et al.
MATERIALS & DESIGN (2013)
Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion
R. Petrucci et al.
MATERIALS & DESIGN (2013)
Characteristics of kenaf fibre/epoxy composites subjected to thermal degradation
Z. N. Azwa et al.
POLYMER DEGRADATION AND STABILITY (2013)
Polymer Nanocomposites as a New Trend for Packaging Applications
Ahmed M. Youssef
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2013)
Bio-nanocomposites for food packaging applications
Jong-Whan Rhim et al.
PROGRESS IN POLYMER SCIENCE (2013)
Study of the O-glycidylation of natural phenolic compounds. The relationship between the phenolic structure and the reaction mechanism
Chahinez Aouf et al.
TETRAHEDRON (2013)
Antimicrobial nanostructures in food packaging
Henriette M. C. de Azeredo
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2013)
Impact Property of Flexible Epoxy Treated Natural Fiber Reinforced PLA Composites
Wiphawee Nuthong et al.
10TH ECO-ENERGY AND MATERIALS SCIENCE AND ENGINEERING SYMPOSIUM (2013)
Surface modifications for the effective dispersion of carbon nanotubes in solvents and polymers
Sang Won Kim et al.
CARBON (2012)
Sustainable optically transparent composites based on epoxidized soy-bean oil (ESO) matrix and high contents of bacterial cellulose (BC)
A. Retegi et al.
CELLULOSE (2012)
Studies on the characterization of piassava fibers and their epoxy composites
Denise Cristina O. Nascimento et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Mechanical, thermal and microstructural characteristics of cellulose fibre reinforced epoxy/organoclay nanocomposites
H. Alamri et al.
COMPOSITES PART B-ENGINEERING (2012)
Jute fibre/epoxy composites: Surface properties and interfacial adhesion
Thi-Thu-Loan Doan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Recent Advances in Biopolymers and Biopolymer-Based Nanocomposites for Food Packaging Materials
X. Z. Tang et al.
CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2012)
Preparation of a bio-based epoxy with comparable properties to those of petroleum-based counterparts
X. Q. Liu et al.
EXPRESS POLYMER LETTERS (2012)
Chemo-enzymatic functionalization of gallic and vanillic acids: synthesis of bio-based epoxy resins prepolymers
Chahinez Aouf et al.
GREEN CHEMISTRY (2012)
A study on moisture absorption and swelling in bio-based jute-epoxy composites
Reza Masoodi et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
Study on mechanical and tribo-performance of rice-husk filled glass-epoxy hybrid composites
Arun Kumar Rout et al.
MATERIALS & DESIGN (2012)
Effect of water absorption on the mechanical properties of nano-filler reinforced epoxy nanocomposites
H. Alamri et al.
MATERIALS & DESIGN (2012)
Flexural properties of treated and untreated kenaf/epoxy composites
B. F. Yousif et al.
MATERIALS & DESIGN (2012)
Effect of polybutylene terephthalate (PBT) on impact property improvement of hybrid kenaf/glass epoxy composite
M. M. Davoodi et al.
MATERIALS LETTERS (2012)
Microstructural, mechanical, and thermal characteristics of recycled cellulose fiber-halloysite-epoxy hybrid nanocomposites
H. Alamri et al.
POLYMER COMPOSITES (2012)
Study on mechanism of phosphorus-silicon synergistic flame retardancy on epoxy resins
Wenchao Zhang et al.
POLYMER DEGRADATION AND STABILITY (2012)
A study of surface changes of wood-polypropylene composites as the result of exterior weathering
Syetlana Butylina et al.
POLYMER DEGRADATION AND STABILITY (2012)
The mechanisms and mechanics of the toughening of epoxy polymers modified with fullerene C60
Vjacheslav V. Zuev
POLYMER ENGINEERING AND SCIENCE (2012)
Mechanical properties and water absorption behaviour of recycled cellulose fibre reinforced epoxy composites
H. Alamri et al.
POLYMER TESTING (2012)
Effect of borates on thermal degradation and flame retardancy of epoxy resins using polyhedral oligomeric silsesquioxane as a curing agent
Hongyu Yang et al.
THERMOCHIMICA ACTA (2012)
Investigation of curing kinetics of sodium carboxymethyl cellulose/epoxy resin system by differential scanning calorimetry
Jin Zhang et al.
THERMOCHIMICA ACTA (2012)
The kinetic analysis of isothermal curing reaction of an epoxy resin-glassflake nanocomposite
Mehdi Ghaffari et al.
THERMOCHIMICA ACTA (2012)
Adhesive wear and frictional performance of bamboo fibres reinforced epoxy composite
Umar Nirmal et al.
TRIBOLOGY INTERNATIONAL (2012)
Factorial Study on the Tensile Strength of a Coir Fiber-Reinforced Epoxy Composite
Fairuz I. Romli et al.
CONFERENCE ON MODELING, IDENTIFICATION AND CONTROL (2012)
Fatigue Behavior of Kenaf Fibre Reinforced Epoxy Composites
Abdul Hakim Abdullah et al.
ENGINEERING JOURNAL-THAILAND (2012)
Electrical properties of chicken feather fiber reinforced epoxy composites
Mingjiang Zhan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Water barrier properties of nanoclay filled sisal fibre reinforced epoxy composites
T. P. Mohan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes
M. T. Kim et al.
COMPOSITES PART B-ENGINEERING (2011)
Improving the flexural and thermomechanical properties of amino-functionalized carbon nanotube/epoxy composites by using a pre-curing treatment
S. G. Prolongo et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
The use of composite materials in modern orthopaedic medicine and prosthetic devices: A review
M. -S. Scholz et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Use of lignin as a compatibiliser in hemp/epoxy composites
Benjamin M. Wood et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Variability of Urinary Concentrations of Bisphenol A in Spot Samples, First Morning Voids, and 24-Hour Collections
Xiaoyun Ye et al.
ENVIRONMENTAL HEALTH PERSPECTIVES (2011)
Hydrothermal decomposition of brominated epoxy resin in waste printed circuit boards
Jin Yin et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2011)
Influence of Alkali Fiber Treatment and Fiber Processing on the Mechanical Properties of Hemp/Epoxy Composites
Mohammad S. Islam et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Synthesis of Epoxy Resins from Alcohol-Liquefied Wood and the Mechanical Properties of the Cured Resins
Hajime Kishi et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Effect of carbon nanofiber dispersion on the tensile properties of epoxy nanocomposites
S. Rana et al.
JOURNAL OF COMPOSITE MATERIALS (2011)
Synthesis and Properties of Biobased Epoxy Resins. Part 1. Glycidylation of Flavonoids by Epichlorohydrin
Helene Nouailhas et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2011)
Mechanical properties of natural fibre reinforced polyester composites: Jowar, sisal and bamboo
A. V. Ratna Prasad et al.
MATERIALS & DESIGN (2011)
Influence of alkali treatment and fibre length on mechanical properties of short Agave fibre reinforced epoxy composites
K. Mylsamy et al.
MATERIALS & DESIGN (2011)
Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites
N. Venkateshwaran et al.
MATERIALS & DESIGN (2011)
Woven hybrid composites: Tensile and flexural properties of oil palm-woven jute fibres based epoxy composites
M. Jawaid et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Preparation and properties of bio-based epoxy networks derived from isosorbide diglycidyl ether
Marie Chrysanthos et al.
POLYMER (2011)
Comparison of Curing Agents for Epoxidized Vegetable Oils Applied to Composites
Judith D. Espinoza-Perez et al.
POLYMER COMPOSITES (2011)
Thermal properties of epoxy resin nanocomposites based on hydrotalcites
A. Frache et al.
POLYMER DEGRADATION AND STABILITY (2011)
Synthesis of three novel phosphorus-containing flame retardants and their application in epoxy resins
Dechao Sun et al.
POLYMER DEGRADATION AND STABILITY (2011)
Effects of Fiber Volume Fraction on Unidirectional Kenaf/Epoxy Composites: The Transition Region
A. H. Abdullah et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2011)
Synthesis and characterization of a DOPO-substitued organophosphorus oligomer and its application in flame retardant epoxy resins
Xin Wang et al.
PROGRESS IN ORGANIC COATINGS (2011)
Food packaging based on polymer nanomaterials
Clara Silvestre et al.
PROGRESS IN POLYMER SCIENCE (2011)
Carbon nanotube/epoxy composites fabricated by resin transfer molding
Q. F. Cheng et al.
CARBON (2010)
A review on the application of inorganic nano-structured materials in the modification of textiles: Focus on anti-microbial properties
Roya Dastjerdi et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2010)
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
Peng-Cheng Ma et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Co-cured in-line joints for natural fibre composites
C. Gonzalez-Murillo et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Bisphenol AF Is a Full Agonist for the Estrogen Receptor ERα but a Highly Specific Antagonist for ERβ
Ayami Matsushima et al.
ENVIRONMENTAL HEALTH PERSPECTIVES (2010)
Urinary, Circulating, and Tissue Biomonitoring Studies Indicate Widespread Exposure to Bisphenol A
Laura N. Vandenberg et al.
ENVIRONMENTAL HEALTH PERSPECTIVES (2010)
The Mechanical Properties of Treated and Untreated Kenaf Fibre Reinforced Epoxy Composite
M. A. Abu Bakar et al.
JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (2010)
Review: Nanocomposites in Food Packaging
Amit Arora et al.
JOURNAL OF FOOD SCIENCE (2010)
The toughness of epoxy polymers and fibre composites modified with rubber microparticles and silica nanoparticles
T. H. Hsieh et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Experimental study of relaxation process in unidirectional (epoxy/palm tree fiber) composite
I. Ben Amor et al.
JOURNAL OF MOLECULAR LIQUIDS (2010)
Flame retardance and thermal stability of carbon nanotube epoxy composite prepared from sol-gel method
Chen-Feng Kuan et al.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2010)
Preparation and Properties of Biocomposites Composed of Bio-Based Epoxy Resin, Tannic Acid, and Microfibrillated Cellulose
Mitsuhiro Shibata et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2010)
Effect of Moisture Absorption on Mechanical Properties of Chopped Natural Fiber Reinforced Epoxy Composite
Chittaranjan Deo et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
The effect of aging on Arenga pinnata fiber-reinforced epoxy composite
Aidy Ali et al.
MATERIALS & DESIGN (2010)
Exploring biomass based carbon black as filler in epoxy composites: Flexural and thermal properties
H. P. S. Abdul Khalil et al.
MATERIALS & DESIGN (2010)
A comparative study on erosion characteristics of red mud filled bamboo-epoxy and glass-epoxy composites
Sandhyarani Biswas et al.
MATERIALS & DESIGN (2010)
Fabrication and testing of natural fibre composites: Vakka, sisal, bamboo and banana
K. Murali Mohan Rao et al.
MATERIALS & DESIGN (2010)
Preparation and characterization of an epoxy nanocomposite toughened by a combination of thermoplastic, layered and particulate nano-fillers
A. Mirmohseni et al.
MATERIALS & DESIGN (2010)
Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam
M. M. Davoodi et al.
MATERIALS & DESIGN (2010)
Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibers
Igor Maria De Rosa et al.
MATERIALS & DESIGN (2010)
Mechanical performance of oil palm empty fruit bunches/jute fibres reinforced epoxy hybrid composites
M. Jawaid et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Development of Novel Bio-Based Soybean Oil Epoxy Resins as a Function of Hardener Stoichiometry
A. P. Gupta et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2010)
Thermosetting (bio)materials derived from renewable resources: A critical review
J. -M. Raquez et al.
PROGRESS IN POLYMER SCIENCE (2010)
Recent Developments in Halogen Free Flame Retardants for Epoxy Resins for Electrical and Electronic Applications
Muriel Rakotomalala et al.
MATERIALS (2010)
Polymer-Nanoparticle Composites: From Synthesis to Modern Applications
Thomas Hanemann et al.
MATERIALS (2010)
Bisphenol A Exposure: Human Risk and Health Policy
Cheryl Erler et al.
JOURNAL OF PEDIATRIC NURSING-NURSING CARE OF CHILDREN & FAMILIES (2010)
Silver nanoparticles as a new generation of antimicrobials
Mahendra Rai et al.
BIOTECHNOLOGY ADVANCES (2009)
Mechanical and barrier properties of epoxy resin filled with multi-walled carbon nanotubes
Liberata Guadagno et al.
CARBON (2009)
Synthesis and Properties of Cardanol-Based Epoxidized Novolac Resins Modified with Carboxyl-Terminated Butadiene-Acrylonitrile Copolymer
Ranjana Yadav et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Preparation and Properties of Bio-Based Epoxy Montomorillonite Nanocomposites Derived from Polyglycerol Polyglycidyl Ether and ε-Polylysine
Yoshiro Takada et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Preparation and Optical Properties of Novel Transparent Al-Doped-ZnO/Epoxy Nanocomposites
Yong-Song Luo et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2009)
Effects of bisphenol A on adipokine release from human adipose tissue: Implications for the metabolic syndrome
Nira Ben-Jonathan et al.
MOLECULAR AND CELLULAR ENDOCRINOLOGY (2009)
Multi-scale modeling of cross-linked epoxy nanocomposites
Suyoung Yu et al.
POLYMER (2009)
Synthesis of high-molecular-weight epoxy resins from modified natural oils and Bisphenol A or Bisphenol A-based epoxy resins
Piotr Czub
POLYMERS FOR ADVANCED TECHNOLOGIES (2009)
Pyrolysis of tetrabromobisphenol-A containing paper laminated printed circuit boards
Guido Grause et al.
CHEMOSPHERE (2008)
Dynamic void content prediction during radial injection in liquid composite molding
Boris Gourichon et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Effects of surfactant treatment on mechanical and electrical properties of CNT/epoxy nanocomposites
Yan Geng et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Multiscale modelling of the composite reinforced foam core of a 3D sandwich structure
J. Guilleminot et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Epoxy composites using functionalized alumina platelets as reinforcements
Dharmendra Kumar Shukla et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Bisphenol A and risk of metabolic disorders
Frederick S. vom Saal et al.
JAMA-JOURNAL OF THE AMERICAN MEDICAL ASSOCIATION (2008)
Biocomposites composed of epoxidized soybean oil cured with terpene-based acid anhydride and cellulose fibers
Tsutomu Takahashi et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
Facile preparation and characterization of highly antimicrobial colloid Ag or Au nanoparticles
Yongwen Zhang et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2008)
A novel DOPO-based diamine as hardener and flame retardant for epoxy resin systems
Johannes Artner et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2008)
The effect of alkaline treatment on tensile properties of sugar palm fibre reinforced epoxy composites
D. Bachtiar et al.
MATERIALS & DESIGN (2008)
Green composites and nanocomposites from soybean oil
Zengshe Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Bioactive packaging technologies for extended shelf life of meat-based products
Veronique Coma
MEAT SCIENCE (2008)
Preparation, thermal properties and flame retardancy of phosphorus- and silicon-containing epoxy resins
M. Sponton et al.
POLYMER DEGRADATION AND STABILITY (2008)
Thermomechanical behavior of epoxy resins modified with epoxidized vegetable oils
Fan-Long Jin et al.
POLYMER INTERNATIONAL (2008)
Nanofiller-reinforced polymer nanocomposites
J. Njuguna et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2008)
Epoxy-based fibre reinforced nanocomposites
James Njuguna et al.
ADVANCED ENGINEERING MATERIALS (2007)
Physicochemical properties and fracture behavior of soy-based resin
A. Shabeer et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Studies on the blends of cardanol-based epoxidized novolac resin and CTPB
Archana Devi et al.
EUROPEAN POLYMER JOURNAL (2007)
Antibacterial efficacy of aminoglycosidic antibiotics protected gold nanoparticles - A brief study
A. Nirmala Grace et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2007)
Anticorrosive properties of the epoxy-cardanol resin based paints
L. K. Aggarwal et al.
PROGRESS IN ORGANIC COATINGS (2007)
Mechanical and thermal properties of waste water bamboo husk fiber reinforced epoxy composites
Yeng-Fong Shih
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Plant oil renewable resources as green alternatives in polymer science
Michael A. R. Meier et al.
CHEMICAL SOCIETY REVIEWS (2007)
Mechanical and fracture properties of cellulose-fibre-reinforced epoxy laminates
I. M. Low et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Sustainable from the very beginning: rational design of molecules by life cycle engineering as an important approach for green pharmacy and green chemistry
Klaus Kuemmerer
GREEN CHEMISTRY (2007)
Endocrine disruptor bisphenol A strongly binds to human estrogen-related receptor γ (ERRγ) with high constitutive activity
Sayaka Takayanagi et al.
TOXICOLOGY LETTERS (2006)
Synthesis of wood-based epoxy resins and their mechanical and adhesive properties
Hajime Kishi et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Synthesis of novel boron-containing epoxy-novolac resins and properties of cured products
C. Martin et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2006)
Study on in situ preparation of nano calcium carbonate/PMMA composite particles
Wei Wu et al.
MATERIALS LETTERS (2006)
Polymers from triglyceride oils
F. Seniha Guner et al.
PROGRESS IN POLYMER SCIENCE (2006)
Green composites from renewable resources: Preparation of epoxidized soybean oil and flax fiber composites
ZS Liu et al.
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2006)
Loading of gold nanoparticles inside the DPPC bilayers of liposome and their effects on membrane fluidities
SH Park et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2006)
Preparation and characterization of transparent ZnO/epoxy nanocomposites with high-UV shielding efficiency
YQ Li et al.
POLYMER (2006)
Structural characterization and thermal oxidation properties of LLDPE/MgAl-LDH nanocomposites
LC Du et al.
JOURNAL OF MATERIALS CHEMISTRY (2006)
An extensive new literature concerning low-dose effects of bisphenol A shows the need for a new risk assessment
FS vom Saal et al.
ENVIRONMENTAL HEALTH PERSPECTIVES (2005)
Fracture toughness and impact strength of anhydride-cured biobased epoxy
H Miyagawa et al.
POLYMER ENGINEERING AND SCIENCE (2005)
Waste reduction system for production of useful materials from un-utilized bamboo using steam explosion followed by various conversion methods
C Asada et al.
BIOCHEMICAL ENGINEERING JOURNAL (2005)
Feedstock recycling of flame-resisting poly(lactic acid)/aluminum hydroxide composite to L,L-lactide
H Nishida et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)
Cationic polymerization and physicochemical properties of a biobased epoxy resin initiated by thermally latent catalysts
SJ Park et al.
EUROPEAN POLYMER JOURNAL (2005)
Optically transparent composites reinforced with networks of bacterial nanofibers
H Yano et al.
ADVANCED MATERIALS (2005)
Solution to filling time prediction issues for constant pressure driven injection in RTM
M Deleglise et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
A generic mixed FE-SPH method to address hydro-mechanical coupling in liquid composite moulding processes
S Comas-Cardona et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Thermo-physical and impact properties of epoxy containing epoxidized linseed oil, 1 - Anhydride-cured epoxy
H Miyagawa et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2004)
A review of current flame retardant systems for epoxy resins
ED Weil et al.
JOURNAL OF FIRE SCIENCES (2004)
Effect of biodegradable epoxidized castor oil on physicochemical and mechanical properties of epoxy resins
SJ Park et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2004)
Products and processes for a sustainable chemical industry: a review of achievements and prospects
JF Jenck et al.
GREEN CHEMISTRY (2004)
Clay mineralogical and related characteristics of geophagic materials
MJ Wilson
JOURNAL OF CHEMICAL ECOLOGY (2003)
Critical evaluation of observed adverse effects of endocrine active substances on reproduction and development, the immune system, and the nervous system
JC O'Connor et al.
PURE AND APPLIED CHEMISTRY (2003)
Combustion behavior and thermal degradation properties of epoxy resins with a curing agent containing a caged bicyclic phosphate
X Li et al.
POLYMER DEGRADATION AND STABILITY (2002)
Cure kinetics of epoxy resins studied by non-isothermal DSC data
D Rosu et al.
THERMOCHIMICA ACTA (2002)
Novel polymer-ceramic nanocomposite based on high dielectric constant epoxy formula for embedded capacitor application
Y Rao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)
Modification of thermosetting resins and composites through preformed polymer particles: A review
BS Hayes et al.
POLYMER COMPOSITES (2001)
Biomedical applications of polymer-composite materials: a review
S Ramakrishna et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites
MZ Rong et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
Surfactant-assisted processing of carbon nanotube/polymer composites
XY Gong et al.
CHEMISTRY OF MATERIALS (2000)
分享论文
