Determination of total and partially extractable solid-bound element concentrations using collision/reaction cell inductively coupled plasma-mass spectrometry and their significance in environmental studies

Determination of solid-bound element concentrations is an important initial step in environmental studies especially for assessment of contamination level, and of origin, relative mobility, and fate of contaminants. This study revealed that a relatively new collision/reaction cell inductively coupled plasma-mass spectrometry is a potent tool for determining total and partially extractable solid-bound element (V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, and Pb) concentrations in a complex matrix solution containing HF and/or HCl. Six different extraction methods commonly used for environmental monitoring studies were tested for their bias and variability using estuarine and marine standard reference materials. Microwave-assisted methods based on concentrated [HNO3] or [HNO3 + HF (4:1)] and [HNO3 + HF + HCl (10:3:2)] were applied for determining pseudo-total and total element concentrations, respectively. Dilute-acids (1 M HNO3, 1 M HCl, and 0.5 M HCl) were utilized in single-step partial extraction protocols. Except the 0.5 M HCl cold-extraction method which was performed at room temperature, other partial extraction protocols used microwave-digestion. This study demonstrated that the use of microwave-assisted methods in studies aimed at determining the non-residual, non-specific extractable fractions of elements in solid environmental samples may result in overestimation, and thus needs to be re-examined. We believe that the cold extraction method will play a significant role in future environmental monitoring studies. Nevertheless, results of the cold extraction method not accompanied with total element concentrations have limited value, as the amount of extraction may vary significantly with the nature (origin) of the elements, and with the types of the samples. Therefore, we suggest combining microwave-assisted total digestion and 0.5 M HCl cold-extraction methods as a relatively cost- and time-effective, environmentally sound screening procedure for routine environmental monitoring programs involving a large number of samples from diverse geological and anthropogenic settings.