Centrifuge model test on the retrogressive landslide subjected to reservoir water level fluctuation

Geological disasters have occurred frequently in the Three Gorges Reservoir area. Therefore, the stability and failure mode research on riverside landslides has become increasingly important. Taking the toe of Liangshuijing landslide as a case study and combining the geological conditions of the Three Gorges Reservoir area, a centrifuge slope model is constructed. In addition, the fluctuation of the water level is simulated in the centrifuge model test. Based on the digital photography, laser displacement sensors (LDS), pore pressure transducers (PPT) and earth pressure sensors (E), multi-physical data are obtained. Finally, numerical simulation is carried out to analyze the stability and deformation characteristics of the slope model. The results indicate that: (1) At the water level rise stage, the model is dominated by the vertical displacement. And the horizontal displacement is much larger than the vertical displacement at the drainage stage. (2) Cracks first appear at the toe of the slope and extend to the middle and rear of the model gradually. Then, deformation occurs in the middle platform of the slope. (3) At the water level rise stage, the factor of safety increases rapidly. When the reservoir water level remains stable, the stability of the slope decreases slowly. And at the drainage stage, the factor of safety decreases first and then increases. (4) There is a significant positive linear correlation between the decline rate of the safety factor and the drainage rate over a certain test range. And the stability of the landslides on the reservoir banks would become worse gradually during the long-term cyclic operation of the Three Gorges Reservoir.