Optimized butterfly specimen for the fracture testing of sheet materials under combined normal and shear loading

The present paper is concerned with multi-axial ductile fracture experiments on sheet metals. Different stress-states are achieved within a flat specimen by applying different combinations of normal and transverse loads to the specimen boundaries. The specimen geometry is optimized such that fracture initiates remote from the free specimen boundaries. Fracture experiments are carried out on TRIP780 steel for four different loading conditions, varying from pure shear to transverse plane strain tension. Hybrid experimental-numerical analyses are performed to determine the stress and strain fields within the specimen gage section. The results show that strain localization cannot be avoided prior to the onset of fracture. Through-thickness necking prevails under tension-dominated loading while the deformation localizes along a band crossing the entire gage section under shear-dominated loading. Both experimental and simulation results demonstrate that the proposed fracture testing method is very sensitive to imperfections in the specimen machining. The loading paths to fracture are determined in terms of stress triaxiality, Lode angle parameter and equivalent plastic strain. The experimental data indicates that the relationship between the stress triaxiality and the equivalent plastic strain at the onset of ductile fracture is not unique. (C) 2011 Elsevier Ltd. All rights reserved.