Stearic acid/silica fume composite as form-stable phase change material for thermal energy storage

The aim of this research is to prepare a novel form-stable composite phase change material (PCM) for the latent heat thermal energy storage (LHTES) in buildings, passive solar space heating by impregnating of stearic acid (SA) into silica fume (SF) matrix through the technique of solution impregnation. The structure, thermal properties, thermal reliability, thermal conductivity and heat storage or release performance of the composite PCM were determined by scanning electron microscope (SEM), Fourier transformation infrared (FTIR), differential scanning calorirnetry (DSC) and thermal cycling test analysis technique. The results show that the form-stable composite PCM has the optimal effect, preventing the leakage of SA from the composite, emerges when the SA and SF mass ratio is 1:0.9. The SA loaded on the matrix surface by physical attraction with the mass ratio of 47% during the preparation process. The latent heat of the composite PCM is measured as 82.53 J/g for the melting process and 84.47 J/g for the freezing process, respectively, which indicate the heat storage ability of composite is connected with the mass ratio of SA in composite. The results of DSC, FTIR and thermal cycling test are all show that the thermal reliability of the composite PCM has an imperceptible change. The increase of thermal conductivity was also confirmed by comparing the melting time, freezing time and phase change time of the composite with that of SA. All of the conclusions indicate that the composite has a better thermal conductivity and good thermal and chemical stability. (C) 2011 Elsevier B.V. All rights reserved.