相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Disentangling the impact of side chains and fluorine substituents of conjugated donor polymers on the performance of photovoltaic blends
Liqiang Yang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Surface-Initiated Poly(3-methylthiophene) as a Hole-Transport Layer for Polymer Solar Cells with High Performance
Liqiang Yang et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
High-Performance Inverted Polymer Solar Cells with Solution-Processed Titanium Chelate as Electron-Collecting Layer on ITO Electrode
Zhan'ao Tan et al.
ADVANCED MATERIALS (2012)
A Selenophene-Based Low-Bandgap Donor-Acceptor Polymer Leading to Fast Ambipolar Logic
Auke J. Kronemeijer et al.
ADVANCED MATERIALS (2012)
Morphology characterization in organic and hybrid solar cells
Wei Chen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells
Hin-Lap Yip et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
The Effect of Solvent Additives on Morphology and Excited-State Dynamics in PCPDTBT:PCBM Photovoltaic Blends
Fabian Etzold et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
A Selenophene Analogue of PCDTBT: Selective Fine-Tuning of LUMO to Lower of the Bandgap for Efficient Polymer Solar Cells
Boram Kim et al.
MACROMOLECULES (2012)
Easily Attainable Phenothiazine-Based Polymers for Polymer Solar Cells: Advantage of Insertion of S,S-dioxides into its Polymer for Inverted Structure Solar Cells
Gyoungsik Kim et al.
MACROMOLECULES (2012)
Design strategies for organic semiconductors beyond the molecular formula
Zachary B. Henson et al.
NATURE CHEMISTRY (2012)
High-efficiency inverted dithienogermole-thienopyrrolodione-based polymer solar cells
Cephas E. Small et al.
NATURE PHOTONICS (2012)
Efficient Phthalimide Copolymer-Based Bulk Heterojunction Solar Cells: How the Processing Additive Influences Nanoscale Morphology and Photovoltaic Properties
Hao Xin et al.
ADVANCED ENERGY MATERIALS (2012)
Evolution of Structure, Optoelectronic Properties, and Device Performance of Polythiophene: Fullerene Solar Cells During Thermal Annealing
Tao Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Efficient, Air-Stable Bulk Heterojunction Polymer Solar Cells Using MoOx as the Anode Interfacial Layer
Yanming Sun et al.
ADVANCED MATERIALS (2011)
Improving Device Efficiency of Polymer/Fullerene Bulk Heterojunction Solar Cells Through Enhanced Crystallinity and Reduced Grain Boundaries Induced by Solvent Additives
Ming-Shin Su et al.
ADVANCED MATERIALS (2011)
Efficient Small Molecule Bulk Heterojunction Solar Cells with High Fill Factors via Pyrene-Directed Molecular Self-Assembly
Olivia P. Lee et al.
ADVANCED MATERIALS (2011)
Copolymers Comprising 2,7-Carbazole and Bis-benzothiadiazole Units for Bulk-Heterojunction Solar Cells
Jonggi Kim et al.
CHEMISTRY-A EUROPEAN JOURNAL (2011)
3,6-Di(furan-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione and bithiophene copolymer with rather disordered chain orientation showing high mobility in organic thin film transistors
Yuning Li et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
A Naphthodithiophene-Diketopyrrolopyrrole Donor Molecule for Efficient Solution-Processed Solar Cells
Stephen Loser et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Mixed solvents for reproducible photovoltaic bulk heterojunctions
Zhongqiang Wang et al.
JOURNAL OF PHOTONICS FOR ENERGY (2011)
Effect of Carbon Chain Length in the Substituent of PCBM-like Molecules on Their Photovoltaic Properties
Guangjin Zhao et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
When Function Follows Form: Effects of Donor Copolymer Side Chains on Film Morphology and BHJ Solar Cell Performance
Jodi M. Szarko et al.
ADVANCED MATERIALS (2010)
Improved Performance of Polymer Bulk Heterojunction Solar Cells Through the Reduction of Phase Separation via Solvent Additives
Corey V. Hoven et al.
ADVANCED MATERIALS (2010)
An Easily Synthesized Blue Polymer for High-Performance Polymer Solar Cells
Ergang Wang et al.
ADVANCED MATERIALS (2010)
A Low-Bandgap Diketopyrrolopyrrole-Benzothiadiazole-Based Copolymer for High-Mobility Ambipolar Organic Thin-Film Transistors
Prashant Sonar et al.
ADVANCED MATERIALS (2010)
For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%
Yongye Liang et al.
ADVANCED MATERIALS (2010)
Enhanced Photovoltaic Performance of Low-Bandgap Polymers with Deep LUMO Levels
Huaxing Zhou et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)
Polyphenylene-Based Materials for Organic Photovoltaics
Chen Li et al.
CHEMICAL REVIEWS (2010)
Effects of Intercalation on the Hole Mobility of Amorphous Semiconducting Polymer Blends
Nichole C. Cates et al.
CHEMISTRY OF MATERIALS (2010)
Towards optimization of P3HT:bisPCBM composites for highly efficient polymer solar cells
Myoung Hee Yun et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Combination of Indene-C60 Bis-Adduct and Cross-Linked Fullerene Interlayer Leading to Highly Efficient Inverted Polymer Solar Cells
Yen-Ju Cheng et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
Highly Efficient and Stable Inverted Polymer Solar Cells Integrated with a Cross-Linked Fullerene Material as an Interlayer
Chao-Hsiang Hsieh et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
Morphologies of Self-Organizing Regioregular Conjugated Polymer/Fullerene Aggregates in Thin Film Solar Cells
Mao-Yuan Chiu et al.
MACROMOLECULES (2010)
Development of Novel Conjugated Donor Polymers for High-Efficiency Bulk-Heterojunction Photovoltaic Devices
Junwu Chen et al.
ACCOUNTS OF CHEMICAL RESEARCH (2009)
Bimolecular Crystals of Fullerenes in Conjugated Polymers and the Implications of Molecular Mixing for Solar Cells
A. C. Mayer et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
Vertical Phase Separation in Poly(3-hexylthiophene): Fullerene Derivative Blends and its Advantage for Inverted Structure Solar Cells
Zheng Xu et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
Recent Progress in Polymer Solar Cells: Manipulation of Polymer: Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar Cells
Li-Min Chen et al.
ADVANCED MATERIALS (2009)
Polymer-Fullerene Bulk-Heterojunction Solar Cells
Gilles Dennler et al.
ADVANCED MATERIALS (2009)
Well-defined donor-acceptor rod-coil diblock copolymers based on P3HT containing C-60: the morphology and role as a surfactant in bulk-heterojunction solar cells
Changduk Yang et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Tuning the Properties of Polymer Bulk Heterojunction Solar Cells by Adjusting Fullerene Size to Control Intercalation
Nichole C. Cates et al.
NANO LETTERS (2009)
Polymer solar cells with enhanced open-circuit voltage and efficiency
Hsiang-Yu Chen et al.
NATURE PHOTONICS (2009)
Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
Sung Heum Park et al.
NATURE PHOTONICS (2009)
New approach for forming bulk-heterojunction solar cells comprising a π-conjugated polymer and C60
Jae Kwan Lee et al.
ORGANIC ELECTRONICS (2009)
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Frederik C. Krebs
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Simultaneous use of small- and wide-angle X-ray techniques to analyze nanometerscale phase separation in polymer heterojunction solar cells
Mao-Yuan Chiu et al.
ADVANCED MATERIALS (2008)
Organic photovoltaics - Polymer-fullerene composite solar cells
Barry C. Thompson et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2008)
High-performance polymer heterojunction solar cells of a polysilafluorene derivative
Ergang Wang et al.
APPLIED PHYSICS LETTERS (2008)
Investigation of nanoscale morphological changes in organic photovoltaics during solvent vapor annealing
Steve Miller et al.
JOURNAL OF MATERIALS CHEMISTRY (2008)
Synthesis, characterization, and transistor response of semiconducting silole polymers with substantial hole mobility and air stability. Experiment and theory
Gang Lu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)
Processing additives for improved efficiency from bulk heterojunction solar cells
Jae Kwan Lee et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)
Toward a rational design of poly(2,7-carbazole) derivatives for solar cells
Nicolas Blouin et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)
A new donor-acceptor-donor polyfluorene copolymer with balanced electron and hole mobility
Abay Gadisa et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Solvent annealing effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes
Gang Li et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Low band gap polymers for organic photovoltaics
Eva Bundgaard et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2007)
Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols
J. Peet et al.
NATURE MATERIALS (2007)
Efficient white-light-emitting diodes based on poly(N-vinylcarbazole) doped with blue fluorescent and orange phosphorescent materials
Ping-I Shih et al.
APPLIED PHYSICS LETTERS (2006)
Design rules for donors in bulk-heterojunction solar cells -: Towards 10 % energy-conversion efficiency
MC Scharber et al.
ADVANCED MATERIALS (2006)
High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends
G Li et al.
NATURE MATERIALS (2005)
Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology
WL Ma et al.
ADVANCED FUNCTIONAL MATERIALS (2005)
Effects of packing structure on the optoelectronic and charge transport properties in poly(9,9-di-n-octylfluorene-alt-benzothiadiazole)
CL Donley et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2005)
Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells
T Erb et al.
ADVANCED FUNCTIONAL MATERIALS (2005)
Compositional dependence of the performance of poly(p-phenylene vinylene):: Methanofullerene bulk-heterojunction solar cells
VD Mihailetchi et al.
ADVANCED FUNCTIONAL MATERIALS (2005)
Morphology and thermal stability of the active layer in poly(p-phenylenevinylene)/methanofullerene plastic photovoltaic devices
XN Yang et al.
MACROMOLECULES (2004)
Employing end-functional polythiophene to control the morphology of nanocrystal-polymer composites in hybrid solar cells
JS Liu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2004)
Crystalline organization of a methanofullerene as used for plastic solar-cell applications
XN Yang et al.
ADVANCED MATERIALS (2004)
High-performance polymer solar cells of an alternating polyfluorene copolymer and a fullerene derivative
M Svensson et al.
ADVANCED MATERIALS (2003)
Synthesis of a new thiophene/quinoxaline CT-type copolymer with high solubility and its basic optical properties
T Yamamoto et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2003)