Experimental and simulation investigation of the combustion characteristics and emissions using n-butanol/biodiesel dual-fuel injection on a diesel engine

The combustion and emissions of n-butanol/biodiesel dual-fuel injection were investigated on a diesel engine based on experiments and simulations. n-Butanol was injected into the intake port, while soybean biodiesel was directly injected into the cylinder. Three different premixed ratios (r(p)) were investigated, including 80%, 85% and 90%. The injection timings of biodiesel were adjusted to keep the 50% burn point (CA50) between 2 degrees CA and 10 degrees CA after top dead center for achieving stable operation. The EGR (exhaust gas recirculation) rates were changed from 35% to 45%. Results demonstrate that the same CA50 can be achieved by the early or late-injection of biodiesel. For both early- and late-injection, the auto-ignition is triggered by the biodiesel reaction. Increasing premixed ratios can retard the combustion phasing and reduce the pressure rise rate, while the indicated thermal efficiency (ITE) reduces by about 0.6% as increasing r(p) to 90%. The early-injection has lower NOx emissions compared to the late-injection due to lower combustion temperature. The soot emissions are comparable for both early- and late-injection. With the increase of EGR, the NOx and soot emissions decrease, while the HC (hydrocarbons) and CO (carbon monoxide) emissions increase. The ITE reduces by 1-2% as increasing EGR to 45%. (C) 2014 Elsevier Ltd. All rights reserved.