相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。A physically-based constitutive model for a nitrogen alloyed ultralow carbon stainless steel
An He et al.
COMPUTATIONAL MATERIALS SCIENCE (2015)
Identification of friction coefficients and strain-compensated Arrhenius-type constitutive model by a two-stage inverse analysis technique
Cunsheng Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)
Correlation between strain-rate sensitivity and dynamic softening behavior during hot processing
H. Q. Liang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effect of pre-treatment on hot deformation behavior and processing map of an aged nickel-based superalloy
Dao-Guang He et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Characterization of hot deformation behavior and processing map of FGH4096-GH4133B dual alloys
Yanhui Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
EBSD study of a hot deformed nickel-based superalloy
Y. C. Lin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Hot Deformation and Dynamic Recrystallization of Ti-6Al-7Nb Biomedical Alloy in Single-Phase β Region
F. Pilehva et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
New Constitutive Model for Hot Deformation Behaviors of Ni-Based Superalloy Considering the Effects of Initial δ Phase
Y. C. Lin et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
The dynamic recrystallization evolution and kinetics of Ni-18.3Cr-6.4Co-5.9W-4Mo-2.19Al-1.16Ti superalloy during hot deformation
Hongbin Zhang et al.
JOURNAL OF MATERIALS RESEARCH (2015)
Constitutive modeling for predicting peak stress characteristics during hot deformation of hot isostatically processed nickel-base superalloy
S. S. Satheesh Kumar et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Deformation behavior of AA2017-SiCp in warm and hot deformation regions
S. Serajzadeh et al.
MATERIALS & DESIGN (2015)
Constitutive modeling of hot deformation behavior of vacuum hot pressed Cu-8Cr-4Nb alloy
A. K. Shukla et al.
MATERIALS & DESIGN (2015)
Hot deformation behaviour and fracture of 10CrMoWNb ferritic-martensitic steel
A. Yu. Churyumov et al.
MATERIALS & DESIGN (2015)
Plastic deformation behavior and processing maps of a Ni-based superalloy
Peng Zhang et al.
MATERIALS & DESIGN (2015)
Effect of strain rate on microstructure evolution of a nickel-based superalloy during hot deformation
Hongbin Zhang et al.
MATERIALS & DESIGN (2015)
New constitutive model for high-temperature deformation behavior of inconel 718 superalloy
Y. C. Lin et al.
MATERIALS & DESIGN (2015)
Quantification of the strengthening effect of reinforcements during hot deformation of aluminum-based composites
Hamed Mirzadeh
MATERIALS & DESIGN (2015)
Microstructural evolution of a nickel-based superalloy during hot deformation
Xiao-Min Chen et al.
MATERIALS & DESIGN (2015)
A simple constitutive model for predicting flow stress of medium carbon microalloyed steel during hot deformation
Zohreh Akbari et al.
MATERIALS & DESIGN (2015)
Correlation between grain size and flow stress during steady-state dynamic recrystallization
Houquan Liang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Necking behavior and microstructural evolution during high strain rate superplastic deformation of IN718 superalloy
Linjie Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
A physically-based constitutive model for SA508-III steel: Modeling and experimental verification
Dingqian Dong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
A modified Johnson-Cook model for tensile flow behaviors of 7050-T7451 aluminum alloy at high strain rates
Jin Qiang Tan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effects of initial aging time on processing map and microstructures of a nickel-based superalloy
Dong-Xu Wen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of chemical composition and processing variables on the hot flow behavior of leaded brass alloys
A. Momeni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Study of dynamic recrystallization in a Ni-based superalloy by experiments and cellular automaton model
Yan-Xing Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Competition between dynamic recovery and recrystallization during hot deformation for TC18 titanium alloy
Y. Q. Ning et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
A Simplified Approach for Developing Constitutive Equations for Modeling and Prediction of Hot Deformation Flow Stress
Hamed Mirzadeh
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Prediction of hot deformation behavior in Ni-based alloy considering the effect of initial microstructure
Qiang Zuo et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2015)
Prediction of hot deformation behavior in Ni-based alloy considering the effect of initial microstructure
Qiang Zuo et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2015)
Dynamic Recrystallization of Wrought-Solidified-Wrought Complex Structure in Ni-Based Superalloys
Yongquan Ning et al.
ADVANCED ENGINEERING MATERIALS (2015)
A Modified Johnson-Cook Constitutive Equation to Predict Hot Deformation Behavior of Ti-6Al-4V Alloy
Jun Cai et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Constitutive Modeling During Simultaneous Forming and Quenching of a Boron Bearing Steel at High Temperatures
S. Salari et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Flow stress model for IN718 accounting for evolution of strengthening precipitates during thermal treatment
M. Fisk et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
A physically-based constitutive model for a typical nickel-based superalloy
Y. C. Lin et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Dynamic recrystallization and precipitation in high manganese austenitic stainless steel during hot compression
Amir Momeni et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2014)
Peculiarities of the Rheological Behavior for the Al-Mg-Sc-Zr Alloy Under High-Temperature Deformation
A. S. Smirnov et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Effects of microstructure and γ′ distribution on the hot deformation behavior for a powder metallurgy superalloy FGH96
Chi Zhang et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Constitutive models for high-temperature flow behaviors of a Ni-based superalloy
Y. C. Lin et al.
MATERIALS & DESIGN (2014)
Hot tensile deformation behaviors and fracture characteristics of a typical Ni-based superalloy
Y. C. Lin et al.
MATERIALS & DESIGN (2014)
The flow behaviors of CLAM steel at high temperature
Wen-Tao Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Constitutive description of high temperature flow behavior of Sanicro-28 super-austenitic stainless steel
A. Mirzaei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effects of initial δ phase on hot tensile deformation behaviors and fracture characteristics of a typical Ni-based superalloy
Y. C. Lin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Hot deformation behavior and processing map of a typical Ni-based superalloy
Dong-Xu Wen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Strain-Dependent Constitutive Modelling of AZ80 Magnesium Alloy Containing 0.5 wt% Rare Earth Elements and Evaluation of Its Validation Using Finite Element Method
Mahzad Zohoori Tali et al.
METALS AND MATERIALS INTERNATIONAL (2014)
Hot deformation behavior and flow stress modeling of annealed AZ61 Mg alloys
Chinghao Liao et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2014)
Hot Deformation and Dynamic Recrystallization of 17-4 PH Stainless Steel
Hamed Mirzadeh et al.
ISIJ INTERNATIONAL (2013)
A comparative study on Johnson-Cook, modified Johnson-Cook and Arrhenius-type constitutive models to predict the high temperature flow stress in 20CrMo alloy steel
An He et al.
MATERIALS & DESIGN (2013)
Effect of Temperatures and Strain Rates on the Average Size of Grains Refined by Dynamic Recrystallization for as-extruded 42CrMo Steel
Guo-zheng Quan et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2013)
A characterization for the dynamic recrystallization kinetics of as-extruded 7075 aluminum alloy based on true stress-strain curves
Guo-zheng Quan et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
A Phenomenological Constitutive Model for Describing Thermo-Viscoplastic Behavior of Al-Zn-Mg-Cu Alloy Under Hot Working Condition
Y. C. Lin et al.
EXPERIMENTAL MECHANICS (2012)
The kinetics of dynamic recrystallization of 42CrMo steel
Ming-Song Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
A critical review of experimental results and constitutive descriptions for metals and alloys in hot working
Y. C. Lin et al.
MATERIALS & DESIGN (2011)
Recrystallization of 30Cr2Ni4MoV ultra-super-critical rotor steel during hot deformation. Part I: Dynamic recrystallization
Fei Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Constitutive descriptions for hot compressed 2124-T851 aluminum alloy over a wide range of temperature and strain rate
Y. C. Lin et al.
COMPUTATIONAL MATERIALS SCIENCE (2010)
A modified Johnson-Cook model for tensile behaviors of typical high-strength alloy steel
Y. C. Lin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Constitutive modeling for elevated temperature flow behavior of 42CrMo steel
Y. C. Lin et al.
COMPUTATIONAL MATERIALS SCIENCE (2008)
Dislocations, vacancies and solute diffusion in physical based plasticity model for AISI 316L
Lars-Erik Lindgren et al.
MECHANICS OF MATERIALS (2008)
Prediction of 42CrMo steel flow stress at high temperature and strain rate
Y. C. Lin et al.
MECHANICS RESEARCH COMMUNICATIONS (2008)