相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Roll-to-Roll Compatible Sintering of Inkjet Printed Features by Photonic and Microwave Exposure: From Non-Conductive Ink to 40% Bulk Silver Conductivity in Less Than 15 Seconds
Jolke Perelaer et al.
ADVANCED MATERIALS (2012)
Surface-enhanced Raman spectroscopy (SERS): progress and trends
Dana Cialla et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2012)
Electrical conductivity enhancement in inkjet-printed narrow lines through gradual heating
Changjae Kim et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2012)
The application of graphene as electrodes in electrical and optical devices
Gunho Jo et al.
NANOTECHNOLOGY (2012)
Single-sided inkjet functionalization of silicon photonic microcantilevers
Stanley J. Ness et al.
SENSORS AND ACTUATORS B-CHEMICAL (2012)
Inkjet printing of transparent InZnSnO conducting electrodes from nano-particle ink for printable organic photovoltaics
Jihoon Kim et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
IR-sintering of ink-jet printed metal-nanoparticles on paper
Daniel Tobjork et al.
THIN SOLID FILMS (2012)
Graphene-based functional materials for organic solar cells [Invited]
Zhe Pan et al.
OPTICAL MATERIALS EXPRESS (2012)
Electrical Assembly and Reduction of Graphene Oxide in a Single Solution Step for Use in Flexible Sensors
Yunlong Guo et al.
ADVANCED MATERIALS (2011)
Solution-Processable Reduced Graphene Oxide as a Novel Alternative to PEDOT:PSS Hole Transport Layers for Highly Efficient and Stable Polymer Solar Cells
Jin-Mun Yun et al.
ADVANCED MATERIALS (2011)
Graphene as Transparent Electrode Material for Organic Electronics
Shuping Pang et al.
ADVANCED MATERIALS (2011)
Graphene - A Promising Material for Organic Photovoltaic Cells
Xiangjian Wan et al.
ADVANCED MATERIALS (2011)
Submillimeter-scale Graphene Patterning through Ink-jet Printing of Graphene Oxide Ink
Yong Min Jo et al.
CHEMISTRY LETTERS (2011)
Contactless Electrical Sintering of Silver Nanoparticles on Flexible Substrates
Mark Allen et al.
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2011)
Laser Direct Writing of Conductive Silver Film on Polyimide Surface from Decomposition of Organometallic Ink
Zhixiang Cai et al.
JOURNAL OF ELECTRONIC MATERIALS (2011)
Sintering of Inkjet-Printed Silver Nanoparticles at Room Temperature Using Intense Pulsed Light
J. S. Kang et al.
JOURNAL OF ELECTRONIC MATERIALS (2011)
Solvent and substrate effects on inkjet-printed dots and lines of silver nanoparticle colloids
Kwon-Yong Shin et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2011)
Pulsed light sintering characteristics of inkjet-printed nanosilver films on a polymer substrate
Dong Jun Lee et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2011)
Inkjet Metrology II: Resolved Effects of Ejection Frequency, Fluidic Pressure, and Droplet Number on Reproducible Drop-on-Demand Dispensing
R. Michael Verkouteren et al.
LANGMUIR (2011)
Solution-processed transparent electrodes
David S. Hecht et al.
MRS BULLETIN (2011)
High-Quality Single-Layer Graphene via Reparative Reduction of Graphene Oxide
Boya Dai et al.
NANO RESEARCH (2011)
Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors
Lu Huang et al.
NANO RESEARCH (2011)
Inkjet-printed gold nanoparticle electrochemical arrays on plastic. Application to immunodetection of a cancer biomarker protein
Gary C. Jensen et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)
First drop dissimilarity in drop-on-demand inkjet devices
Amin Famili et al.
PHYSICS OF FLUIDS (2011)
Pulsed-laser printing of silver nanoparticles ink: control of morphological properties
Ludovic Rapp et al.
OPTICS EXPRESS (2011)
Towards ink-jet printed fine line front side metallization of crystalline silicon solar cells
Y. T. Gizachew et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
A Novel Inkjet Printed Surface Enhanced Raman Spectroscopy (SERS) Substrate for the Detection of Toxic Heavy Metals
A. Eshkeiti et al.
EUROSENSORS XXV (2011)
Chemically Derived Graphene Oxide: Towards Large-Area Thin-Film Electronics and Optoelectronics
Goki Eda et al.
ADVANCED MATERIALS (2010)
Inkjet Printing-Process and Its Applications
Madhusudan Singh et al.
ADVANCED MATERIALS (2010)
Gold Nanoparticle Chemiresistor Sensor Array that Differentiates between Hydrocarbon Fuels Dissolved in Artificial Seawater
James Scott Cooper et al.
ANALYTICAL CHEMISTRY (2010)
Inkjet Printed Surface Enhanced Raman Spectroscopy Array on Cellulose Paper
Wei W. Yu et al.
ANALYTICAL CHEMISTRY (2010)
All-Organic Vapor Sensor Using Inkjet-Printed Reduced Graphene Oxide
Vineet Dua et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)
Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
Brian Derby
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Carbon Nanotube Thin Films: Fabrication, Properties, and Applications
Liangbing Hu et al.
CHEMICAL REVIEWS (2010)
Graphene Based Electrochemical Sensors and Biosensors: A Review
Yuyan Shao et al.
ELECTROANALYSIS (2010)
Fabrication of Polyaniline-Based Gas Sensors Using Piezoelectric Inkjet and Screen Printing for the Detection of Hydrogen Sulfide
Karl Crowley et al.
IEEE SENSORS JOURNAL (2010)
Analysis of Adhesion and Fracture Energy of Nano-Particle Silver in Electronics Packaging Applications
Sung Chul Joo et al.
IEEE TRANSACTIONS ON ADVANCED PACKAGING (2010)
Application of Wide-Band Material Characterization Methods to Printable Electronics
Vesa J. Pynttari et al.
IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING (2010)
Ink-jet printing and camera flash sintering of silver tracks on different substrates
K. C. Yung et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Inkjet printed electronics using copper nanoparticle ink
Jin Sung Kang et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2010)
Experimental analysis of waveform effects on satellite and ligament behavior via in situ measurement of the drop-on-demand drop formation curve and the instantaneous jetting speed curve
Kye-Si Kwon
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2010)
Effects of actuating waveform, ink property, and nozzle size on piezoelectrically driven inkjet droplets
Tong-Miin Liou et al.
MICROFLUIDICS AND NANOFLUIDICS (2010)
Formation and Stability of Lines Produced by Inkjet Printing
Jonathan Stringer et al.
LANGMUIR (2010)
Crack formation and substrate effects on electrical resistivity of inkjet-printed Ag lines
Dong Jun Lee et al.
MATERIALS LETTERS (2010)
Utilizing inkjet printing to fabricate electrical interconnections in a system-in-package
Ville Pekkanen et al.
MICROELECTRONIC ENGINEERING (2010)
Inkjet printed dielectrics for electronic packaging of chip embedding modules
Manfred Mengel et al.
MICROELECTRONIC ENGINEERING (2010)
Inkjetting dielectric layer for electronic applications
Kimmo Kaija et al.
MICROELECTRONIC ENGINEERING (2010)
The dynamics of the piezo inkjet printhead operation
Herman Wijshoff
PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS (2010)
Design of a very large chemical sensor system for mimicking biological olfaction
R. Beccherelli et al.
SENSORS AND ACTUATORS B-CHEMICAL (2010)
Ink-jet printed transparent electrode using nano-size indium tin oxide particles for organic photovoltaics
Jin-A. Jeong et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)
Continuous and Scalable Fabrication of Transparent Conducting Carbon Nanotube Films
Budhadipta Dan et al.
ACS NANO (2009)
Microwave Flash Sintering of Inkjet-Printed Silver Tracks on Polymer Substrates
Jolke Perelaer et al.
ADVANCED MATERIALS (2009)
Inkjet-printed gold nanoparticle chemiresistors: Influence of film morphology and ionic strength on the detection of organics dissolved in aqueous solution
Edith Chow et al.
ANALYTICA CHIMICA ACTA (2009)
Inkjet Metrology: High-Accuracy Mass Measurements of Microdroplets Produced by a Drop-on-Demand Dispenser
R. Michael Verkouteren et al.
ANALYTICAL CHEMISTRY (2009)
Intense pulsed light sintering of copper nanoink for printed electronics
Hak-Sung Kim et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2009)
Inkjet printing narrow electrodes with <50 μm line width and channel length for organic thin-film transistors
Jason Doggart et al.
APPLIED PHYSICS LETTERS (2009)
The morphology, electrical conductivity and vapour sensing ability of inkjet-printed thin films of single-wall carbon nanotubes
M. F. Mabrook et al.
CARBON (2009)
Molded Substrates for Inkjet Printed Modules
Jani Miettinen et al.
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2009)
Evaluation of adhesion pull-off performance of nanoparticle-based inkjet-printed silver structure on various substrates
Umur Caglar et al.
INTERNATIONAL JOURNAL OF NANOTECHNOLOGY (2009)
Waveform Design Methods for Piezo Inkjet Dispensers Based on Measured Meniscus Motion
Kye-Si Kwon
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2009)
Reduction of droplet volume by controlling actuating waveforms in inkjet printing for micro-pattern formation
H. Y. Gan et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Limits to feature size and resolution in inkjet printing
J. Stringer et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)
Inkjet printed, conductive, 25 μm wide silver tracks on unstructured polyimide
Henning Meier et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2009)
Carbon nanotubes based transistors as gas sensors: State of the art and critical review
Paolo Bondavalli et al.
SENSORS AND ACTUATORS B-CHEMICAL (2009)
The spontaneous metal-sitting structure on carbon nanotube arrays positioned by inkjet printing for wafer-scale production of high sensitive gas sensor units
Joondong Kim et al.
SENSORS AND ACTUATORS B-CHEMICAL (2009)
Direct patterned etching of silicon dioxide and silicon nitride dielectric layers by inkjet printing
Alison J. Lennon et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
A Review of Carbon Nanotubes-Based Gas Sensors
Yun Wang et al.
Journal of Sensors (2009)
Evaluation of solution-processed reduced graphene oxide films as transparent conductors
Hdctor A. Becerril et al.
ACS NANO (2008)
High quality InAsSb grown on InP substrates using AlSb/AlAsSb buffer layers
Bing-Ruey Wu et al.
APPLIED PHYSICS LETTERS (2008)
Development of ultrafine indium tin oxide (ITO) nanoparticle for ink-jet printing by low-temperature synthetic method
Sung-Jei Hong et al.
IEEE TRANSACTIONS ON NANOTECHNOLOGY (2008)
Optical heating of ink-jet printable Ag and Ag-Cu nanoparticles
Junggwon Yun et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2008)
Comparative study of carbon nanotube dispersion using surfactants
Richa Rastogi et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2008)
Characterization of polymer inks for drop-on-demand printing systems
Ronald M. Meixner et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2008)
Inkjet-printed line morphologies and temperature control of the coffee ring effect
Dan Soltman et al.
LANGMUIR (2008)
Reduced Graphene Oxide Molecular Sensors
Jeremy T. Robinson et al.
NANO LETTERS (2008)
Electrical sintering of nanoparticle structures
Mark L. Allen et al.
NANOTECHNOLOGY (2008)
Recent progress in carbon nanotube-based gas sensors
Ting Zhang et al.
NANOTECHNOLOGY (2008)
Highly conducting graphene sheets and Langmuir-Blodgett films
Xiaolin Li et al.
NATURE NANOTECHNOLOGY (2008)
Large-area ultrathin films of reduced graphene oxide as a transparent and flexible electronic material
Goki Eda et al.
NATURE NANOTECHNOLOGY (2008)
Inkjet printed System-in-Package design and manufacturing
Jani Miettinen et al.
MICROELECTRONICS JOURNAL (2008)
Inkjet printed resistive and chemical-FET carbon nanotube gas sensors
Jani Maklin et al.
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2008)
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Emine Tekin et al.
SOFT MATTER (2008)
Forming openings to semiconductor layers of silicon solar cells by inkjet printing
Alison J. Lennon et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2008)
Fabrication of an ammonia gas sensor using inkjet-printed polyaniline nanoparticles
Karl Crowley et al.
TALANTA (2008)
Direct gravure printing of indium tin oxide nanoparticle patterns on polymer foils
Joerg Puetz et al.
THIN SOLID FILMS (2008)
Direct ink-jet printing of Ag-Cu nanoparticle and Ag-precursor based electrodes for OFET applications
Stefan Gamerith et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Excimer laser processing of inkjet-printed and sputter-deposited transparent conducting SnO2:Sb for flexible electronics
Wayne M. Cranton et al.
THIN SOLID FILMS (2007)
Computational analysis of drop-on-demand drop formation
Qi Xu et al.
PHYSICS OF FLUIDS (2007)
Gold nanoparticle chemiresistor sensors: Direct sensing of organics in aqueous electrolyte solution
Burkhard Raguse et al.
ANALYTICAL CHEMISTRY (2007)
Temporally-resolved inkjet drop impaction on surfaces
Hongming Dong et al.
AICHE JOURNAL (2007)
Studies on inkjet-printed conducting lines for electronic devices
Hyun Chul Jung et al.
JOURNAL OF ELECTRONIC MATERIALS (2007)
All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles
Seung H. Ko et al.
NANOTECHNOLOGY (2007)
Aligned three-dimensional micro structures of conducting polymer composites
Hua Bai et al.
POLYMER (2007)
Fabrication and gas sensitivity of polyaniline-titanium dioxide nanocomposite thin film
Huiling Tai et al.
SENSORS AND ACTUATORS B-CHEMICAL (2007)
Inkjet printed chemical sensor array based on polythiophene conductive polymers
Bo Li et al.
SENSORS AND ACTUATORS B-CHEMICAL (2007)
Ink-jet fabrication of electronic components
S. M. Bidoki et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
Polyaniline doped with dimethyl sulfate as a nucleophilic dopant and its electrochemical properties as an electrode in a lithium secondary battery and a redox supercapacitor
Kwang Sun Ryu et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2007)
Direct writing of silver conductive patterns: Improvement of film morphology and conductance by controlling solvent compositions
Dongjo Kim et al.
APPLIED PHYSICS LETTERS (2006)
Precise control of surface wettability of mixed monolayers using a simple wiping method
Jung Ah Lim et al.
THIN SOLID FILMS (2006)
The effect of carbon nanotube dispersion on CO gas sensing characteristics of polyaniline gas sensor
Y. Wanna et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2006)
Electron scattering in a multiwall carbon nanotube bend junction studied by scanning tunneling microscopy
L. Tapaszto et al.
PHYSICAL REVIEW B (2006)
Inkjet-printed polymer films for the detection of organic vapors
Mohammed F. Mabrook et al.
IEEE SENSORS JOURNAL (2006)
Polymers as functional components in batteries and fuel cells
Gerhard Wegner
POLYMERS FOR ADVANCED TECHNOLOGIES (2006)
Effects of droplet size and solute concentration on drying process of polymer solution droplets deposited on homogeneous surfaces
Jun Fukai et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)
Ink-jet printing and microwave sintering of conductive silver tracks
Jolke Perelaer et al.
ADVANCED MATERIALS (2006)
Visualization of drop-on-demand inkjet: Drop formation and deposition
Hongming Dong et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2006)
Direct ink-jet printing and low temperature conversion of conductive silver patterns
P. J. Smith et al.
JOURNAL OF MATERIALS SCIENCE (2006)
An experimental study of drop-on-demand drop formation
Hongming Dong et al.
PHYSICS OF FLUIDS (2006)
Inkjet-printed polypyrrole thin films for vapour sensing
MF Mabrook et al.
SENSORS AND ACTUATORS B-CHEMICAL (2006)
Control of colloidal particle deposit patterns within picoliter droplets ejected by ink-jet printing
J Park et al.
LANGMUIR (2006)
Sheet resistance measurement of non-standard cleanroom materials using suspended Greek cross test structures
S Enderling et al.
IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING (2006)
Ring stain effect at room temperature in silver nanoparticles yields high electrical conductivity
S Magdassi et al.
LANGMUIR (2005)
Controlled phase separation of polyfluorene blends via inkjet printing
YJ Xia et al.
MACROMOLECULES (2005)
Lithography-free, self-aligned inkjet printing with sub-hundred-nanometer resolution
CW Sele et al.
ADVANCED MATERIALS (2005)
Polymers for chemical sensing
Krishna C. Persaud
MATERIALS TODAY (2005)
A low Curing temperature silver ink for use in ink-jet printing and subsequent production of conductive tracks
AL Dearden et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2005)
Conductor microstructures by laser curing of printed gold nanoparticle ink
JW Chung et al.
APPLIED PHYSICS LETTERS (2004)
Carbon nanotubes: properties and application
VN Popov
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2004)
Inkjet printing of well-defined polymer dots and arrays
BJ de Gans et al.
LANGMUIR (2004)
Rapid functionalization of cantilever array sensors by inkjet printing
A Bietsch et al.
NANOTECHNOLOGY (2004)
Inkjet printing of highly loaded particulate suspensions
B Derby et al.
MRS BULLETIN (2003)
The stability of ink-jet printed lines of liquid with zero receding contact angle on a homogeneous substrate
PC Duineveld
JOURNAL OF FLUID MECHANICS (2003)
Conducting polymers in electronic chemical sensors
J Janata et al.
NATURE MATERIALS (2003)
Patterned low temperature copper-rich deposits using inkjet printing
GG Rozenberg et al.
APPLIED PHYSICS LETTERS (2002)
Correlation between oligothiophene thin film transistor morphology and vapor responses
L Torsi et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2002)
Direct fabrication of patterned PbS and US on organic sheets at ambient temperature by on-site reaction using inkjet printer
R Teranishi et al.
SOLID STATE IONICS (2002)
Surface morphology of drying latex films: Multiple ring formation
L Shmuylovich et al.
LANGMUIR (2002)
Ink-jet printing of gold conductive tracks
HM Nur et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2002)
A new method for significantly reducing drop radius without reducing nozzle radius in drop-on-demand drop production
AU Chen et al.
PHYSICS OF FLUIDS (2002)
Inkjet printing for materials and devices
P Calvert
CHEMISTRY OF MATERIALS (2001)
Electric field-induced carbon nanotube junction formation
GW Ho et al.
APPLIED PHYSICS LETTERS (2001)
Conducting polymers in microelectronics
M Angelopoulos
IBM JOURNAL OF RESEARCH AND DEVELOPMENT (2001)
High-resolution inkjet printing of all-polymer transistor circuits
H Sirringhaus et al.
SCIENCE (2000)
Contact line deposits in an evaporating drop
RD Deegan et al.
PHYSICAL REVIEW E (2000)
Pattern formation in drying drops
RD Deegan
PHYSICAL REVIEW E (2000)
分享论文
