Fabrication of a green porous lignin-based sphere for the removal of lead ions from aqueous media

A green porous lignin-based sphere (PLS) hadbeen fabricated by a feasible gelation-solidification method from lignosulfonate cross-linked with sodium alginate and epichlorohydrin. The prepared sphere was characterized by Fourier transform infrared spectrometry, scanning electron microscopy, mercury intrusion porosimetry, and thermo gravimetric analysis. The results demonstrated the PLS had a large amount of mesopores (d = 20.7 nm) with a high porosity of 87.66% and a total pore volume of 0.416 cm(3)/g. Batchwise adsorption experiments indicated the PIS possessed excellent adsorption efficiency (95.6 +/- 3.5%) for lead ions at an initial concentration of 25.0 mg/L. The adsorption process could be well fitted by intraparticle diffusion model and Langmuir isotherm model. Application of the PLS in bed column mode for the continuous treatment of lead solution exhibited prolonged breakthrough time from 75 min to 100 min as the bed column heights increased from 0.5 cm to 2.5 cm which was much better than the alkaline lignin column (2.5 cm height, breakthrough time = 60 min). The results strongly suggested the high possibility of the porous sphere being applied for the continuous treatment of heavy metals rich wastewater in industry. (C) 2014 Elsevier B.V. All rights reserved.