期刊
CHEMICAL ENGINEERING JOURNAL
卷 207, 期 -, 页码 195-208出版社
ELSEVIER SCIENCE SA
DOI: 10.1016/j.cej.2012.06.048
关键词
Multiphase; CFD; Flash pyrolysis; Vortex; Lignocellulosic; Fluidized bed
Conversion of biomass via fast pyrolysis and other methods is positioned to be an important part of the energy landscape in the future. Pyrolysis of lignocellulosic biomass in a gas/solid vortex reactor (GSVR) is modeled to assess the potential of this centrifugal fluidization reactor technology and to explore its process intensification abilities. The production of pyrolysis gases, tar/liquids, and char/ash are examined for various operational scenarios using a simple reaction network. A brief comparison with traditional fluidization technologies is performed. The applied CFD model has been previously validated for non-reacting flows using experimental data from an in-house cold-flow apparatus. The product distribution from biomass pyrolysis between 450 and 500 degrees C was determined to be 14-17 wt.% char, 73-76 wt.% tar, and 8.5-9.5 wt.% pyrolysis gas, depending on the specific conditions of the process simulation, with all conditions yielding complete biomass conversion. The calculated convective gas/solid heat transfer coefficients in the GSVR were determined to be similar to 650 W/(m(2) K), which is significantly larger than in non-rotating fluidization reactors. The GSVR exhibited the ability to intensify the biomass pyrolysis process with respect to both production per reactor volume and selectivity toward the desired products, indicating that further investigations with more detailed kinetics and/or experimental reactors is warranted. (C) 2012 Elsevier By. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据