Evaluation of commercial PTFE membranes in desalination by direct contact membrane distillation

In this study, nine flat-sheet commercially available hydrophobic PTFE membranes were used in desalination by direct contact membrane distillation and their characteristics were investigated under different operating conditions including feed temperature, feed flow rate, cold stream flow rate, and feed concentration. Membrane properties, i.e. pore size, thickness, support layer, and salt rejection were also studied. Moreover, membrane module designs including flow arrangements (co-current, counter-current and tangential) for process liquid and depth both on hot and cold sides were tested experimentally. Finally, the long-term performance of the selected membranes for direct contact membrane distillation as a standalone desalination process was investigated. The results indicated that increasing feed temperature, hot feed flow rate, and module depth on the cold side led to increase permeate flux. On the other hand, increasing membrane thickness and module depth on the hot side (at constant flow rate) had negative effects on the flux. The highest permeation flux and salt rejection was achieved when the membranes with a pore size of 0.22 mu m were used in the cross-current follow arrangement of hot and cold streams. In addition, the requirements for support layer for a successful DCMD process has been extensively discussed. (c) 2013 Elsevier B.V. All rights reserved.