Optimisation of flow-field in polymer electrolyte membrane fuel cells using computational fluid dynamics techniques

The purpose of this work was the enhancement of performance of Polymer Electrolyte Membrane Fuel Cells (PEMFC) by optimising the gas flow distribution system. To achieve this, 3D numerical simulations of the gas flow in the assembly, consisting of the fuel side of the bipolar plate and the anode, were performed using a commercial Computational Fluid Dynamics (CFD) software, the FLUENT package. Two types of flow distributors were investigated: a grooved plate with parallel channels of the type commonly used in commercial fuel cells, and a porous material. The simulation showed that the permeability of the gas flow distributor is a key parameter affecting the consumption of reactant gas in the electrodes. Fuel utilisation increased when decreasing the permeability of the flow distributor. In particular, fuel consumption increased significantly when the permeability of the porous material decreased to values below that of the anode. This effect was not observed in the grooved plate, which permeability was higher than that of the anode. Even though the permeability of the grooved plate can be diminished by reducing the width of the channels, values lower than 1 mm are difficult to attain in practice. The simulation shows that porous materials are more advantageous than grooved plates in terms of reactant gas utilisation. (C) 2000 Elsevier Science S.A. All rights reserved.