Investigations of the microscopic structure of poly(vinyl alcohol) hydrogels by confocal laser scanning microscopy

The fluorescence mode confocal laser scanning microscopy (CLSM) is introduced as an alternative method to investigate the bulk structure of poly(vinyl alcohol) (PVA) hydrogel. Investigations of the bulk structure of hydrogel samples, prepared by freezing and controlled thawing of aqueous PVA solutions followed by fluorochrome conjugation, were possible in the native state because with this technique water does not need to be removed prior to examination. This is of advantage to other methods, such as scanning electron microscopy, requiring dehydration by critical-point drying or freeze-etching, because both may result in a significant alteration of the gel structure. CLSM images of the hydrogel bulk structure were taken at several successive intervals from the surface into the hydrogel (up to 60 mum) without freeze-fracturing or cutting the sample. Detailed morphological characterization is achievable by superimposing series of images taken at successive intervals and by magnifying special regions of interest. Images of hydrogel bulk structures revealed a continuous, three-dimensional network that originates from phase-separation (spinodal decomposition) during the freezing period. The pore or mesh size in the cryogel increased, from about 2-7 mum, with decreasing PVA concentration. The surface layer was only a few microns thick, and the bulk structure underneath showed neither porosity gradients nor structural orientations.