An investigation of microstructure evolution in cement paste through setting using ultrasonic and rheological measurements

The response of hydrating cement paste through setting are monitored using theological measurements and ultrasonic reflection measurements. Increases in the elastic modulus and yield stress of cement paste with time are obtained from the rheological measurements. Ultrasonic measurements are performed using horizontally polarized shear waves (SH) reflected off of the hydrating cement paste. Changes in the ultrasonic signal through setting are related with changes in the porosity and stiffness of an equivalent water-filled poroelastic material, which provides identical acoustic impedance. The measured changes in the shear modulus obtained from ultrasonic measurement are shown to correlate well with increase in elastic modulus obtained from theological measurements. The increase in the shear modulus of the porous material obtained from the ultrasonic measurements is shown to correspond well with the observed increase in the yield stress of the cement paste. By combining the information from theological and ultrasonic measurements, it is found that even in the fluid stage there is sufficient structural integrity in the arrangement of cement grains to support low-amplitude shear stress and the evolution of a continuously connected network of cement particles within the paste is coincident with a rapid increase in the shear modulus of the porous skeleton. (C) 2009 Elsevier Ltd. All rights reserved.