Novel hexagonal structure of ultra-high strength magnesium-based alloys

A magnesium (Mg) solid solution with a novel long periodic hexagonal structure was formed for a Mg97Zn1Y2 (at%) alloy in a rod form prepared by extrusion of atomized powders at 573 K as well as in a melt-spun ribbon form. The novel structure of the rod alloy had an ABACAB-type six layered packing with lattice parameters of a = 0.322 nm and c = 3 x 0.521 nm, The Mg phase in the extruded rod alloy had fine grain sizes of 100 to 150 nm and included cubic Mg24Y5 particles with a size of about 10 nm at volume fractions below 10%. The density (p) was 1.84Mg/m(3). The tensile yield strength (sigma(y)) and elongation of the rod alloy were 6 10 MPa and 5%, respectively. and the specific strength defined by the ratio of sigma(y) to p was 330 MPa/(Mg/m(3)), being the highest among all metallic alloys, The sigma(y) is 2.7 to 8 times higher than those for conventional high-strength Mg-based alloys. The excellent mechanical properties are due to the combination of fine grain size. new long periodic hexagonal solid solution, homogeneous dispersion of fine Mg24Y5 particles inside the nano-grains and the absence of the second precipitates along the grain boundary. The new Mg-based alloy is promising for future uses in many fields.