Structure of laminar coflow spray flames at different pressures

Experiments were conducted on laminar spray diffusion flames of ethanol/argon burning in oxygen at pressures of 1 and 3 atm. The flames were physically characterized by measuring droplet velocities and sizes by phase-Doppler anemometry, and gas temperature by thin-filament pyrometry and thermocouples. The flames exhibited a cold core, where little vaporization occurred, surrounded by a primary diffusion flame enveloping most of the droplet cloud. Their structure was strongly influenced by the Peclet number for heat transfer that, by regulating the heat penetrating into the core, and, consequently, the growth of the thermal boundary layer, affected the droplet vaporization history. At pressures above the atmospheric, because of density effects on thermal diffusivity, the boundary layer growth above the burner was reduced and so was the vaporization region. Complete evaporation of the droplets before they reached the primary diffusion flame was ensured if a suitably defined Damkohler number of evaporation, Da(v), was smaller than 1. Conversely, if Da(v) > 1, droplets penetrated the flame, ignited by a flame transfer process that was captured photographically, and burned isolated on the oxidizer side. These conditions of internal or partial group combustion prevailed in the lower part of the flame. Farther up in the flame, this combustion regime progressively shifted toward that of external group combustion, with fewer and fewer direct droplet/flame interactions.