A simple method for calculating interaction of numerous microcracks and its applications

The effects of microcrack interaction on the failure behavior of materials present one problem of considerable interest in micromechanics, which has been extensively argued but has not been resolved as yet. In the present paper, a simple and effective method is presented based on the concept of the effective field to analyze the interaction of microcracks of a large number or of a high density. To determine the stress intensity factors of a microcrack embedded in a solid containing numerous or even countless microcracks, the solid is divided into two regions. The interaction of microcracks in a circular or elliptical region around the considered microcrack is calculated directly by using Kachanov's micromechanics method, while the influence of all other microcracks is reflected by modifying the stress applied in the far field. Both the cases of tensile and compressive loading are considered. This simplified scheme may yield an estimate for stress intensity factors of satisfactory accuracy, and therefore provide a potential tool for elucidating some phenomena of material failure associated with microcracking. As two of its various promising applications, the above scheme is employed to investigate the size effects of material strength due to stochastic distribution of interacting microcracks and to calculate the effective elastic moduli of elastic solids containing distributed microcracks. Some conventional micromechanics methods for estimating the effective moduli of microcracked materials are evaluated by comparing with the numerical results. Only two-dimensional problems have been considered here, though the three-dimensional extension of the present method is of greater interest. (C) 2002 Elsevier Science Ltd. All rights reserved.