Influence of processing conditions on the thermal and mechanical properties of SU8 negative photoresist coatings

The thermal and mechanical properties of a new negative photoresist. SU8, were characterized. The influence of curing conditions, such as baking temperature, baking time and UV dosage. on the thermal and mechanical properties of the resultant coatings was studied in detail. It Was found that the glass-transition temperature (T-g) of the coatings was coincident with the baking temperature over the temperature range of 25 degreesC-220 degreesC for coatings being baked for just 20 min. However, the T-g reached a limiting value (about 240 degreesC) once the cross-linking reaction was complete. and would not increase further with the baking temperature. The peak temperature of the dimension versus temperature plots, where heat shrinkage occurred, was about a factor of 1.16 times higher than the baking temperature for the temperature range studied. Both the L and the shrinkage temperature were affected by the baking, time. The thermal expansion coefficients (TEC). including the volumetric TEC (alpha(v)), the in-plane TEC (alpha(1)) and the out-of-plane TEC (alpha(2)), were measured by a pressure-volume-temperature (PVT) apparatus and thermal-mechanical analyzer (TMA). Great residual stress could be generated during the process. and the change in residual stress with the environmental humidity was investigated using vibrational holographic interferometry.