Effects of changing environment and loading speed on mechanical behavior of FRP composites

Durability of fiber reinforced polymer composites (FRP) are controlled by the durability of their constituents: reinforcement fibers, resin matrices, and the status of interfaces. A great deal of research has been focused on attempting to assess the relationship between interfacial structure and properties of fiber-matrix composites. It is at the interfacial area where stress concentration develops because of differences in the thermal expansion coefficients between the reinforcement and the matrix phase. A significant mismatch in the environmentally induced degradation of matrix and fiber leads to the evolution of localized stress and strain fields in the FRP composite. The present investigation aims to study the effects of changing hygrothermal conditioning cycles (either by changing relative humidity (RH) and keeping the temperature constant, or by changing the temperature while RH the same is maintained) on moisture gain/loss kinetics and on interlaminar shear strength (ILSS) of varied weight fraction glass fiber reinforced epoxy and polyester matrices composites. The mechanical assessment is extended to evaluate the loading rate sensitivity of hygrothermally shocked glass/epoxy and glass/polyester laminates at 2 and 50 mm/min crosshead speeds, respectively. Observations on absorption/desorption kinetics are noticed to be dependent on the nature of hygrothermal shock cycle and on the weight fraction of fiber reinforcement. The results of mechanical performance are statistically significant at different stages of conditioning. Shear values are found to be greater at higher crosshead speed for all undertaken situations. Mechanical responses are observed to be dependent on the matrix resin and the type of hygrothermal shock cycle. Very little and limited literature is open to address the important interactions of polymer composites with this kind of realistic environmental situation.