Observation of shear zone development in ring-shear apparatus with a transparent shear box

Using a new ring-shear apparatus with a transparent shear box and video image analysis system, drained and undrained speed-controlled tests were conducted on coarse-grained silica sands to study the shear-zone formation process in granular materials. Velocity distribution profiles of grains under shear at various stages in the ring shear tests were observed through processing the video image by the Particle Image Velocimetry (PIV) program. Shear-zone thickness and type of shear mode (slide-like or flow-like) during shear were observed. Before reaching peak strength in low-speed and drained condition test, a comparatively major part of the sample in the upper shear box showed a velocity distribution profile of structural deformation and dilatancy behavior. After peak strength, the velocity profile changed into a slide-like mode and thereafter showed almost no change. In higher speed tests with drained and undrained conditions, an almost slide-like mode was observed, compared to low-speed test. Apparent shear-zone thicknesses of high-speed tests are thinner than low-speed tests. Unexpectedly, almost no difference was observed in the shear-zone thickness and mode of shear (slide or flow-like) between drained and undrained tests. This study was conducted as part of the International Programme on Landslides (IPL) M101 Areal prediction of earthquake and rain induced rapid and long-traveling flow phenomena (APERITIF) of the International Consortium on Landslides (ICL). These results will contribute to understanding the mechanism of shear-zone development in granular materials as a basic knowledge for disaster risk mitigation of rapid long run-out landslides.