期刊
ISIJ INTERNATIONAL
卷 46, 期 2, 页码 316-324出版社
IRON STEEL INST JAPAN KEIDANREN KAIKAN
DOI: 10.2355/isijinternational.46.316
关键词
microstructure; ductility; TRIP; retained austenite; annealed martensite; bainitic ferrite; morphology; tensile property
The effects of strain rate and temperature on the strain induced transformation behaviour of retained austenite and hence mechanical properties of TRIP-aided steels with annealed martensite (AM), bainitic ferrite (BF) and polygonal ferrite (PF) matrix microstructures were examined. For this, tensile tests were carried out at four different strain rates varying from 3.33X10(-5)s(-1) to 3.33X10(-2)s(-1) at room temperature and at 150 degrees C. Additional intermittent tests were carried out at intermediate strain rates to estimate the extent of strain induced transformation of austenite to martensite using X-ray diffraction analysis. Tensile strength (TS) decreased with strain rate at both temperatures, though the TS at 150 degrees C was lower for all steels except for BF steel tested at 3.33X10(-5)s(-1). The total elongation (TEL) for PF steel significantly improved at 150 degrees C at all strain rates, with a maximum of 78% obtained at 3.33X10(-3)s(-1), the corresponding TS being 930 MPa. A similar effect was seen in AM steels tested at 3.33X10(-3)s(-1) and 3.33X10(-4)s(-1). However, in BF steel, higher temperature had a detrimental effect on TEL, especially at strain rates of 3.33X10(-2)s(-1) and 3.33X10(-3)s(-1).
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据