Multipronged approach to managing beta-glucan contaminants in the downstream process: Control of raw materials and filtration with charge-modified nylon 6,6 membrane filters

(13)--d-Glucans (beta-glucans) have been found in raw materials used in the manufacture of recombinant therapeutics. Because of their biological activity, beta-glucans are considered process contaminants and consequently their level in the product needs to be controlled. Although beta-glucans introduced into the cell culture process can readily be removed by bind-and-elute chromatography process steps, beta-glucans can also be introduced into the purification process through raw materials containing beta-glucans as well as leachables from filters made from cellulose. This article reports a multipronged approach to managing the beta-glucan contamination in the downstream process. Raw material screening and selection can be used to effectively limit the level of beta-glucan introduced into the downstream process. Placement of a cellulosic filter upstream of the last bind-and-elute column step or effective preuse flushing can also limit the level of contaminant introduced. More importantly, this article reports the active removal of beta-glucan from the downstream process when necessary. It was discovered that the Posidyne (R) filter, a charge-modified nylon 6,6 membrane filter, was able to effectively remove beta-glucans from buffers at relatively low pH and salt concentrations. An approach of using low beta-glucan buffer components combined with filtration of the buffer with a Posidyne membrane has been successfully demonstrated at preparative scale. Additionally, the feasibility of active removal of beta-glucan from in-process product pools by Posidyne membrane filtration has also been demonstrated. Based on the data presented, a mechanism for binding is proposed, as well as a systematic approach for sizing of the Posidyne filter. (c) 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:672-680, 2013