Mixing characteristics and liquid circulation in a new multi-environment bioreactor

The theoretical and experimental aspects of the hydrodynamics and mixing in a new multi-environment bioreactor that uses the air-lift design were investigated. This study focused on the mixing characteristics, residence time distribution, liquid circulation between three zones of aerobic, microaerophilic and anoxic, and liquid displacement in the bioreactor at influent flow rates of 720-1,450 L/day and air flow rates of 15-45 L/min. The theoretical analysis of liquid displacement led to the estimation of the specific rate of liquid discharge from the bioreactor at any given influent flow rate, and the number of liquid circulations between various bioreactor zones before the discharge of a given quantity of wastewater. The ratio of mean residence time to the overall hydraulic retention time (t (m)/HRT) decreased with the increase of air flow rate at any given influent flow rate, and approached unity at higher air flow rates. Mixing was characterized in terms of the axial dispersion coefficient and Bodenstein number, demonstrating a linear relationship with the superficial gas velocity. A correlation was developed between the Bodenstein number and the Froude number. The study of liquid circulation between the zones showed that less than 1.5 % of the circulating liquid escapes circulation at each cycle and flows towards the outer clarifier, while the percentage of escaped liquid decreases with increasing air flow rate at a given influent flow rate. The specific rate of liquid discharge from the bioreactor increased from 0.19 to 0.69 h(-1) with the increase of air and influent flow rates from 15 to 45 L/min and 500 to 1,450 L/day, respectively. Under the examined operating conditions, mixed liquor circulates between 364 and 1,698 times between the aerobic, microaerophilic and anoxic zones before 99 % of its original volume is replaced by the influent wastewater.