☆ 4.7 Article

Polyaniline Protrusions on MoS2 Nanosheets for PVDF Scaffolds with Improved Electrical Stimulation

ACS APPLIED NANO MATERIALS (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Metallurgy & Metallurgical Engineering

In-situ deposition of apatite layer to protect Mg-based composite fabricated via laser additive manufacturing

Youwen Yang et al.

Summary: This study synthesized mesoporous bioglass (MBG) with high pore volume and specific surface area, and introduced it into Mg-based composite via laser additive manufacturing. The incorporated MBG served as powerful adsorption sites, promoting the in-situ deposition of an apatite corrosion-resistant film. Furthermore, MBG improved the mechanical properties and cell behavior of the composite material. This study highlights the advantages of MBG in the fabrication of Mg-based implants for orthopedic applications.

JOURNAL OF MAGNESIUM AND ALLOYS (2023)

添加到收藏夹

Article Chemistry, Applied

3D MoS2 foam integrated with carbon paper as binder-free anode for high performance sodium-ion batteries

Fangying Zheng et al.

Summary: MoS2 with 3D macroporous foam structure and high conductivity obtained through SiO2 templates exhibits superior electrochemical performance in sodium-ion batteries, including high specific capacity and cycling stability.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Pre-oxidation induced in situ interface strengthening in biodegradable Zn/nano-SiC composites prepared by selective laser melting

Chengde Gao et al.

Summary: In this study, Zn/nano-SiC biocomposites with strengthened interface bonding were prepared through pre-oxidation treatments and selective laser melting. The oxide layers generated by pre-oxidation not only improved the wettability and interface bonding, but also induced in situ reaction between Zn matrix and nano-SiC, resulting in enhanced mechanical properties. The optimized biocomposite exhibited higher compressive yield strength and appropriate degradation behavior and biocompatibility, showing potential practical applicability for orthopedic applications.

JOURNAL OF ADVANCED RESEARCH (2022)

添加到收藏夹

Article Engineering, Biomedical

Magnetostrictive alloys: Promising materials for biomedical applications

Chengde Gao et al.

Summary: This review summarizes the advances and biomedical applications of magnetostrictive alloys, including the types of alloys, preparation methods, magnetostrictive strains and phase compositions. It also discusses the interactions with cells and the latest applications in various fields.

BIOACTIVE MATERIALS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

In situ synthesis of hydroxyapatite nanorods on graphene oxide nanosheets and their reinforcement in biopolymer scaffold

Cijun Shuai et al.

Summary: This study successfully combined the mechanical properties of GO and the bioactivity of HAP in biopolymer bone scaffold through in situ synthesis, addressing the dispersion issues of GO and HAP.

JOURNAL OF ADVANCED RESEARCH (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Redox Poly-Counterion Doped Conducting Polymers for Pseudocapacitive Energy Storage

Ming-Yue Zhang et al.

Summary: This study introduces a redox-active poly-counterion doping concept to enhance the electrochemical performance of conducting polymers (CPs), especially under ultra-high mass loadings. By doping with poly-counterions, the dopants undergo redox reactions during charge/discharge processes to provide additional capacitance and improve the electrical conductivity of CPs. Additionally, poly-counterions with steric hindrance can act as structural pillars and facilitate ion transport in CPs.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Dispersion strategies for low-dimensional nanomaterials and their application in biopolymer implants

P. Feng et al.

Summary: This study summarizes the application of low-dimensional nanomaterials in biopolymer implants and their dispersion strategies, emphasizing the importance of surface modification, synergistic dispersion, and in situ growth. Additionally, it outlines the mixing techniques of low-dimensional nanomaterials with biopolymers and their applications in tissue engineering, along with suggestions for future research.

MATERIALS TODAY NANO (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Performance Poly(vinylidene difluoride)/Dopamine Core/Shell Piezoelectric Nanofiber and Its Application for Biomedical Sensors

Tong Li et al.

Summary: The research introduces a new strategy for fabricating soft piezoelectric nanomaterials with excellent performance and stability. A highly sensitive all-fiber-based soft sensor has been successfully developed and demonstrated high accuracy and sensitivity for physiological mechanical stimulation in in vivo experiments.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical Alloying of Immiscible Metallic Systems: Process, Microstructure, and Mechanism

Cijun Shuai et al.

Summary: Mechanical alloying of immiscible metallic systems is an effective solid-state processing method that achieves atomic-level alloying and avoids solute separation. This article discusses alloying principles, microstructure, and the effects of process parameters on immiscible metallic systems.

ADVANCED ENGINEERING MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Remotely controlled self-powering electrical stimulators for osteogenic differentiation using bone inspired bioactive piezoelectric whitlockite nanoparticles

Vignesh Krishnamoorthi Kaliannagounder et al.

Summary: This study introduces piezoelectricity into whitlockite nanoparticles for the first time in literature, demonstrating superior ferroelectric and dielectric characteristics as well as the ability to produce electrical signals analogous to native tissues. The piezoelectric WH NPs can drive a LED and enhance osteogenic differentiation of pre-osteoblast cells, producing bioelectric signals similar to native tissues.

NANO ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

MXene-enhanced β-phase crystallization in ferroelectric porous composites for highly-sensitive dynamic force sensors

Jinyoung Kim et al.

Summary: The study demonstrates self-powered piezoelectric e-skins with high sensitivity and broad sensing range based on 3D porous structures of MXene/PVDF. The porous structures enhance the piezoelectric sensitivity, resulting in significant performance improvements in low and high-pressure ranges.

NANO ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Modulation of piezoelectric properties in electrospun PLLA nanofibers for application-specific self-powered stem cell culture platforms

Youyi Tai et al.

Summary: The study systematically dissected the effects of dimensional control and heat treatment on the piezoelectric performance of electrospun PLLA nanofibers. Modulation of piezoelectric properties in PLLA nanofibers was critical in determining the differentiation efficiency of stem cells. The findings highlight the potential of electrospun PLLA nanofibers with precisely controlled piezoelectric properties for self-powered stem cell engineering platforms specific to target tissues.

NANO ENERGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Wireless Localized Electrical Stimulation Generated by an Ultrasound-Driven Piezoelectric Discharge Regulates Proinflammatory Macrophage Polarization

Ying Kong et al.

Summary: The study proposes a method for regulating macrophage polarization using electrical signals derived from a piezoelectric material, which enhances the M1 polarization of macrophages, inhibits tumor cell proliferation, and provides a powerful tool for engineering macrophages for immunotherapy.

ADVANCED SCIENCE (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Triboelectric Nanogenerators for Therapeutic Electrical Stimulation

Giorgio Conta et al.

Summary: Current research focuses on developing self-powered IOB therapeutic devices using TENG technology, known for its bioconformability, low cost, simple manufacturability, and self-power capabilities. TENG-induced ES holds promise for novel therapeutic interventions and could pave the way for the development of personalized healthcare systems.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Triboelectric Nanogenerators: Triboelectric Nanogenerators for Therapeutic Electrical Stimulation (Adv. Mater. 26/2021)

Giorgio Conta et al.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Applied

Synthesis of a mace-like cellulose nanocrystal@Ag nanosystem via in-situ growth for antibacterial activities of poly-L-lactide scaffold

Cijun Shuai et al.

Summary: A mace-like nanosystem was constructed to improve the dispersion of silver nanoparticles in scaffolds, showing excellent antibacterial activities and enhanced mechanical properties.

CARBOHYDRATE POLYMERS (2021)

添加到收藏夹

Article Engineering, Manufacturing

A comparative study on nanoinclusion effect of MoS2 nanosheets and MoS2 quantum dots on fracture toughness and interfacial properties of epoxy composites

Shahina Riaz et al.

Summary: The study demonstrates that MQDs significantly enhanced the mechanical properties of EP composites, outperforming MNSs. This is attributed to the small size and excellent dispersion of MQDs, allowing them to effectively fill voids and interact better with the EP matrix to improve mechanical and interfacial properties.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Rare earth improves strength and creep resistance of additively manufactured Zn implants

Youwen Yang et al.

Summary: In this study, cerium was alloyed with biodegradable Zinc using laser additive manufacturing technique, which effectively improved the mechanical properties and creep resistance. The Zn-Ce alloy exhibited significantly enhanced ultimate tensile strength and reduced creep rate, along with strong antibacterial activity, favorable cytocompatibility, and hemocompatibility, showing promising potential as a candidate for bone repair applications.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Constructing core-shell structured BaTiO3@carbon boosts piezoelectric activity and cell response of polymer scaffolds

Fangwei Qi et al.

Summary: Piezoelectric composites incorporating BaTiO3@carbon (BT@C) hybrid nanoparticles show enhanced piezoelectric performance and mechanical properties, accelerating cell proliferation and differentiation. The carbon shell strengthens the local electric field loaded on BT and induces the formation of beta phase, enhancing the piezoelectric response of the scaffolds.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Wafer-scale heterostructured piezoelectric bio-organic thin films

Fan Yang et al.

Summary: The research introduces a novel approach for the large-scale fabrication of piezoelectric biomaterial thin films with excellent piezoelectric properties and mechanical flexibility. The glycine-PVA films, with their natural compatibility and degradability in physiological environments, have the potential to advance the development of transient implantable electromechanical devices.

SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Ultrasonic-driven electrical signal-iron ion synergistic stimulation based on piezotronics induced neural differentiation of mesenchymal stem cells on FeOOH/PVDF nanofibrous hybrid membrane

Ruitong Zhang et al.

Summary: A novel method to induce neural differentiation of rat bone-marrow-derived mesenchymal stem cells (rBMSCs) based on piezotronics is reported here. The differentiated cells exhibited neuronal characteristics without using any neural inducing factors, suggesting a significant potential for clinical and neural tissue engineering applications.

NANO ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Conducting polyaniline decorated in-situ poled Ferrite nanorod-PVDF based nanocomposite as piezoelectric energy harvester

Ipsita Chinya et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Chemistry, Physical

Engineering layer structure of MoS2/polyaniline/graphene nanocomposites to achieve fast and reversible lithium storage for high energy density aqueous lithium-ion capacitors

Jie Chao et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Electronic control of designer cells

Valda Vinson

SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Osteointegration of 3D-Printed Fully Porous Polyetheretherketone Scaffolds with Different Pore Sizes

Xiaobo Feng et al.

ACS OMEGA (2020)

添加到收藏夹

Article Chemistry, Physical

Re-usable self-poled piezoelectric/piezocatalytic films with exceptional energy harvesting and water remediation capability

Biswajoy Bagchi et al.

NANO ENERGY (2020)

添加到收藏夹

Review Chemistry, Physical

Ultrasound-induced wireless energy harvesting: From materials strategies to functional applications

Laiming Jiang et al.

NANO ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Self-powered implantable electrical stimulator for osteoblasts' proliferation and differentiation

Jingjing Tian et al.

NANO ENERGY (2019)

添加到收藏夹

Review Endocrinology & Metabolism

The role of osteoblasts in energy homeostasis

Naomi Dirckx et al.

NATURE REVIEWS ENDOCRINOLOGY (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Piezoelectric Biomaterials for Sensors and Actuators

Meysam T. Chorsi et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Analytical

Electrochemical aptasensor based on conductive supramolecular polymer hydrogels for thrombin detection with high selectivity

Xinyan Wang et al.

TALANTA (2019)

添加到收藏夹

Article Chemistry, Physical

Control of piezoelectricity in amino acids by supramolecular packing

Sarah Guerin et al.

NATURE MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of porous structure and pore size on mechanical strength of 3D-printed comby scaffolds

Hongxia Zhao et al.

MATERIALS LETTERS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Green Route to a Low Cost Anisotropic MoS2/Poly(Vinylidene Fluoride) Nanocomposite with Ultrahigh Electroactive Phase and Improved Electrical and Mechanical Properties

Kai Cai et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

添加到收藏夹

Article Energy & Fuels

Highly-flexible piezoelectric nanogenerators with silver nanowires and barium titanate embedded composite films for mechanical energy harvesting

Bhaskar Dudem et al.

APPLIED ENERGY (2018)

添加到收藏夹

Article Chemistry, Analytical

Engineered photoelectrochemical platform for the ultrasensitive detection of caffeic acid based on flower-like MoS2 and PANI nanotubes nanohybrid

Jin Wang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

添加到收藏夹

Article Chemistry, Physical

All rGO-on-PVDF-nanofibers based self-powered electronic skins

Yuanfei Ai et al.

NANO ENERGY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Observation of Strong Interlayer Coupling in MoS2/WS2 Heterostructures

Jing Zhang et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Van der Waals Force Isolation of Monolayer MoS2

Alper Gurarslan et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent Advances in Two-Dimensional Materials beyond Graphene

Ganesh R. Bhimanapati et al.

ACS NANO (2015)

添加到收藏夹

Article Electrochemistry

Porous tremella-like MoS2/polyaniline hybrid composite with enhanced performance for lithium-ion battery anodes

Hui Liu et al.

ELECTROCHIMICA ACTA (2015)

添加到收藏夹

Article Chemistry, Physical

High conductivity graphene-like MoS2/polyaniline nanocomposites and its application in supercapacitor

Jin Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fabrication of 3D Hierarchical MoS2/Polyaniline and MoS2/C Architectures for Lithium-Ion Battery Applications

Lianren Hu et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

添加到收藏夹

Article Polymer Science

Effect of thermal processing conditions on the structure and dielectric properties of PVDF films

Vineet Tiwari et al.

JOURNAL OF POLYMER RESEARCH (2014)

添加到收藏夹

Review Nanoscience & Nanotechnology

Electronics based on two-dimensional materials

Gianluca Fiori et al.

NATURE NANOTECHNOLOGY (2014)

添加到收藏夹

Article Chemistry, Physical

Highly Ordered Mesoporous MoS2 with Expanded Spacing of the (002) Crystal Plane for Ultrafast Lithium Ion Storage

Hao Liu et al.

ADVANCED ENERGY MATERIALS (2012)

添加到收藏夹

Article Polymer Science

Self-Assembled Single-Crystal Polyaniline Microplates and Their Anisotropic Electrical Transport Property

Yong Yan et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2011)

添加到收藏夹

Review Materials Science, Multidisciplinary

Piezoelectric films for high frequency ultrasonic transducers in biomedical applications

Qifa Zhou et al.

PROGRESS IN MATERIALS SCIENCE (2011)

添加到收藏夹

Article Engineering, Biomedical

Protein adsorption and cell adhesion on cationic, neutral, and anionic 2-methacryloyloxyethyl phosphorylcholine copolymer surfaces

Yan Xu et al.

BIOMATERIALS (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dramatic enhancements in toughness of polyvinylidene fluoride nanocomposites via nanoclay-directed crystal structure and morphology

D Shah et al.

ADVANCED MATERIALS (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.