相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Fluidic Manipulating of Printable Zinc Oxide for Flexible Organic Solar Cells
Xiaoyu Liu et al.
ADVANCED MATERIALS (2022)
MXenes for Energy Harvesting
Yizhou Wang et al.
ADVANCED MATERIALS (2022)
Review on efficiency improvement effort of perovskite solar cell
Hailin Zhang et al.
SOLAR ENERGY (2022)
Recent Advances in Hole-Transporting Layers for Organic Solar Cells
Cinthya Anrango-Camacho et al.
NANOMATERIALS (2022)
Tandem Organic Solar Cell with 20.2% Efficiency
Zhong Zheng et al.
JOULE (2022)
Design and fabrication of MoO3 nanoparticles incorporated PEDOT:PSS hybrid thin films for ITO-free organic solar cells
P. Gurudevi et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)
A general and facile solution approach for deposition of high-quality metal oxide charge transport layers
Yuxiang Wang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)
A New PEDOT Derivative for Efficient Organic Solar Cell with a Fill Factor of 0.80
Qian Kang et al.
ADVANCED ENERGY MATERIALS (2022)
2D materials for organic and perovskite photovoltaics
Um Kanta Aryal et al.
NANO ENERGY (2022)
Copper phosphotungstate as low cost, solution-processed, stable inorganic anode interfacial material enables organic photovoltaics with over 18% efficiency
Jiangsheng Yu et al.
NANO ENERGY (2022)
Desired open-circuit voltage increase enables efficiencies approaching 19% in symmetric-asymmetric molecule ternary organic photovoltaics
Lingling Zhan et al.
JOULE (2022)
Importance and Advancement of Modification Engineering in Perovskite Solar Cells
Xiang Wu et al.
SOLAR RRL (2022)
Near-Infrared All-Fused-Ring Nonfullerene Acceptors Achieving an Optimal Efficiency-Cost-Stability Balance in Organic Solar Cells
Wenrui Liu et al.
CCS CHEMISTRY (2022)
Highly Efficient Organic Solar Cells Enabled by the Incorporation of a Sulfonated Graphene Doped PEDOT:PSS Interlayer
Supeng Pei et al.
ACS APPLIED MATERIALS & INTERFACES (2022)
Achieving over 18 % Efficiency Organic Solar Cell Enabled by a ZnO-Based Hybrid Electron Transport Layer with an Operational Lifetime up to 5 Years
Shitong Li et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)
Highly efficient inverted organic solar cells with natural biomaterial histidine as electron transport layer
Chunxiang Liu et al.
ORGANIC ELECTRONICS (2022)
Ink Engineering in Blade-Coating Large-Area Perovskite Solar Cells
Jinxin Yang et al.
ADVANCED ENERGY MATERIALS (2022)
Development of a Complex High-Conductivity Hole Transport Layer with Energy-Level Control for High-Efficiency Organic Solar Cells by the Solution Process
Hyoung Seok Lee et al.
ACS APPLIED ENERGY MATERIALS (2022)
Water/Alcohol-Soluble Conjugated Polymers Based on Cyclopentadithiophene and Fluorene as Cathode Interlayers Elevate the Stability and Efficiency in Organic Solar Cells
Hebing Nie et al.
ACS APPLIED ENERGY MATERIALS (2022)
Li-Doped ZnO Electron Transport Layer for Improved Performance and Photostability of Organic Solar Cells
Jie Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2022)
ZnO/Ti3C2Tx monolayer electron transport layers with enhanced conductivity for highly efficient inverted polymer solar cells
Chunli Hou et al.
CHEMICAL ENGINEERING JOURNAL (2021)
18.69% PCE from organic solar cells
Ke Jin et al.
JOURNAL OF SEMICONDUCTORS (2021)
Influence of the volume of EGME-DMSO mixed co-solvent doping on the characteristics of PEDOT:PSS and their application in polymer solar cells
Cisem Kirbiyik Kurukavak et al.
POLYMERS & POLYMER COMPOSITES (2021)
Design of All-Fused-Ring Electron Acceptors with High Thermal, Chemical, and Photochemical Stability for Organic Photovoltaics
Xiaozhang Zhu et al.
CCS CHEMISTRY (2021)
N-Type Self-Doped Hyperbranched Conjugated Polyelectrolyte as Electron Transport Layer for Efficient Nonfullerene Organic Solar Cells
Dan Zhou et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Preparation of Tris-Tetrazole-Based Metallogels and Stabilization of Silver Nanoparticles: Studies on Reduction Catalysis and Self-Healing Property
Reena Kyarikwal et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
An Organic-Inorganic Hybrid Electrolyte as a Cathode Interlayer for Efficient Organic Solar Cells
Chaowei Zhao et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)
Manipulation of Zinc Oxide with Zirconium Doping for Efficient Inverted Organic Solar Cells
Xin Song et al.
SMALL (2021)
Low-Bandgap Non-fullerene Acceptors Enabling High-Performance Organic Solar Cells
Wei Liu et al.
ACS ENERGY LETTERS (2021)
A review of trends and drivers of greenhouse gas emissions by sector from 1990 to 2018
William F. Lamb et al.
ENVIRONMENTAL RESEARCH LETTERS (2021)
Evaluation on output parameters of the inverted organic solar cells depending on transition-metal-oxide based hole-transporting materials
Caglar Cetinkaya et al.
OPTICAL MATERIALS (2021)
High-performance hole transport layer based on WS2 doped PEDOT:PSS for organic solar cells
Yuying Wang et al.
ORGANIC ELECTRONICS (2021)
Acid-Assisted Noncovalent Interaction with Enhanced Electron Transportation on Active/Interfacial Layers for 16.43% Nonfullerene Organic Solar Cells
Junying Wu et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2021)
Efficient non-fullerene organic solar cells with low-temperature solution-processing ferrous oxides as hole transport layer
Ping Fu et al.
ORGANIC ELECTRONICS (2021)
A solution-processed, ultraviolet-irradiation-derived WO3 film as anode interface layer for high-performance non-fullerene organic solar cells
Tao Zhan et al.
SOLAR ENERGY (2021)
n-doped inorganic molecular clusters as a new type of hole transport material for efficient organic solar cells
Qian Kang et al.
JOULE (2021)
An Efficiency of 16.46% and a T80 Lifetime of Over 4000 h for the PM6:Y6 Inverted Organic Solar Cells Enabled by Surface Acid Treatment of the Zinc Oxide Electron Transporting Layer
Yunfei Han et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Monolayer Hexagonal Boron Nitride: An Efficient Electron Blocking Layer in Organic Photovoltaics
Mohammad Mahdi Tavakoli et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
18.4 % Organic Solar Cells Using a High Ionization Energy Self-Assembled Monolayer as Hole-Extraction Interlayer
Yuanbao Lin et al.
CHEMSUSCHEM (2021)
Recent progress in emerging 2D layered materials for organic solar cells
Yong Zhao et al.
SOLAR ENERGY (2021)
Ti3C2Tx/PEDOT:PSS Composite Interface Enables over 17% Efficiency Non-fullerene Organic Solar Cells
Jie Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Conductive Ionenes Promote Interfacial Self-Doping for Efficient Organic Solar Cells
Ming Liu et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Ti-Oxo Clusters with Peripheral Alkyl Groups as Cathode Interlayers for Efficient Organic Solar Cells
Xing Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
PEDOT:PSS-Free Polymer Non-Fullerene Polymer Solar Cells with Efficiency up to 18.60% Employing a Binary-Solvent-Chlorinated ITO Anode
Rui Sun et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Nanographene-Osmapentalyne Complexes as a Cathode Interlayer in Organic Solar Cells Enhance Efficiency over 18%
Longzhu Liu et al.
ADVANCED MATERIALS (2021)
Single-Junction Organic Photovoltaic Cell with 19% Efficiency
Yong Cui et al.
ADVANCED MATERIALS (2021)
18.77 % Efficiency Organic Solar Cells Promoted by Aqueous Solution Processed Cobalt(II) Acetate Hole Transporting Layer
Huifeng Meng et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)
Optimization of ZnO:PEIE as an Electron Transport Layer for Flexible Organic Solar Cells
Kalyani D. Kadam et al.
ENERGY & FUELS (2021)
Electron Transport Layers Based on Oligo(ethylene glycol)-Incorporated Polymers Enabling Reproducible Fabrication of High-Performance Organic Solar Cells
Seungjin Lee et al.
MACROMOLECULES (2021)
High-performance polymer solar cells with efficiency over 18% enabled by asymmetric side chain engineering of non-fullerene acceptors
Shihao Chen et al.
SCIENCE CHINA-CHEMISTRY (2021)
Small molecule organic solar cells toward improved stability and performance for Indoor Light Harvesting Application
Magaly Ramirez-Como et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)
Enhanced Charge Collection in Non-Fullerene Organic Solar Cells Using Iridium Complex as an Electron Extraction Layer
Pengchao Zhou et al.
ADVANCED MATERIALS INTERFACES (2021)
Work Function Adjustment of Nb2CTx Nanoflakes as Hole and Electron Transport Layers in Organic Solar Cells by Controlling Surface Functional Groups
Chengwen Huang et al.
ACS ENERGY LETTERS (2021)
Imidazole-Functionalized Imide Interlayers for High Performance Organic Solar Cells
Ming Liu et al.
ACS ENERGY LETTERS (2021)
Reduced non-radiative charge recombination enables organic photovoltaic cell approaching 19% efficiency
Pengqing Bi et al.
JOULE (2021)
Shelf lifetime analysis of organic solar cells combining frequency and time resolved techniques
Alfonsina Abat Amelenan Torimtubun et al.
SUSTAINABLE ENERGY & FUELS (2021)
High-quality WS2 film as a hole transport layer in high-efficiency non-fullerene organic solar cells
Xiaojing Wang et al.
NANOSCALE (2021)
Antisolvent treatment of copper(i) thiocyanate (CuSCN) hole transport layer for efficiency improvements in organic solar cells and light-emitting diodes
Pimpisut Worakajit et al.
JOURNAL OF MATERIALS CHEMISTRY C (2021)
Interfacial engineering of CuSCN-based perovskite solar cells via PMMA interlayer toward enhanced efficiency and stability
Pan Xu et al.
NEW JOURNAL OF CHEMISTRY (2021)
A pyridinium-pended conjugated polyelectrolyte for efficient photocatalytic hydrogen evolution and organic solar cells
Muhammad Rafiq et al.
POLYMER CHEMISTRY (2021)
Advanced research trends in dye-sensitized solar cells
Mikko Kokkonen et al.
JOURNAL OF MATERIALS CHEMISTRY A (2021)
Interlayers for non-fullerene based polymer solar cells: distinctive features and challenges
Roberto Sorrentino et al.
ENERGY & ENVIRONMENTAL SCIENCE (2021)
Tailoring and Modifying an Organic Electron Acceptor toward the Cathode Interlayer for Highly Efficient Organic Solar Cells
Qing Liao et al.
ADVANCED MATERIALS (2020)
Suppressing the Photocatalytic Activity of Zinc Oxide Electron-Transport Layer in Nonfullerene Organic Solar Cells with a Pyrene-Bodipy Interlayer
Anastasia Soultati et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Solution-Processable PEDOT:PSS:α-In2Se3 with Enhanced Conductivity as a Hole Transport Layer for High-Performance Polymer Solar Cells
Jianming Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency
Yong Cui et al.
ADVANCED MATERIALS (2020)
An Ultraviolet-Deposited MoO3 Film as Anode Interlayer for High-Performance Polymer Solar Cells
Ping Cai et al.
ADVANCED MATERIALS INTERFACES (2020)
Studies on One-Step-Synthesized Hydrated Vanadium Pentoxide for Efficient Hole Transport in Organic Photovoltaics
Remya Ravi et al.
ENERGY TECHNOLOGY (2020)
18% Efficiency organic solar cells
Qishi Liu et al.
SCIENCE BULLETIN (2020)
Cathode engineering with perylene-diimide interlayer enabling over 17% efficiency single-junction organic solar cells
Jia Yao et al.
NATURE COMMUNICATIONS (2020)
Dopamine Semiquinone Radical Doped PEDOT:PSS: Enhanced Conductivity, Work Function and Performance in Organic Solar Cells
Miao Zeng et al.
ADVANCED ENERGY MATERIALS (2020)
Enhanced Operating Temperature Stability of Organic Solar Cells with Metal Oxide Hole Extraction Layer
Donggu Lee et al.
POLYMERS (2020)
Highly Efficient Nonfullerene Organic Photovoltaic Devices with 10% Power Conversion Efficiency Enabled by a Fine-Tuned and Solution-Processed Hole-Transporting Layer
Nai-Wei Teng et al.
SOLAR RRL (2020)
High-Efficiency Nonfullerene Organic Solar Cells Enabled by Atomic Layer Deposited Zirconium-Doped Zinc Oxide
Geedhika K. Poduval et al.
SOLAR RRL (2020)
Studies on solution-processed tungsten oxide nanostructures for efficient hole transport in the inverted polymer solar cells
R. Remya et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
17% Non-Fullerene Organic Solar Cells with Annealing-Free Aqueous MoOx
Hong Nhan Tran et al.
ADVANCED SCIENCE (2020)
Self-Assembled Monolayer Enables Hole Transport Layer-Free Organic Solar Cells with 18% Efficiency and Improved Operational Stability
Yuanbao Lin et al.
ACS ENERGY LETTERS (2020)
Enhanced organic photovoltaic performance through promoting crystallinity of photoactive layer and conductivity of hole-transporting layer by V2O5 doped PEDOT:PSS hole-transporting layers
Jianfeng Li et al.
SOLAR ENERGY (2020)
Solution-Processed Molybdenum Oxide with Hydroxyl Radical-Induced Oxygen Vacancy as an Efficient and Stable Interfacial Layer for Organic Solar Cells
Seungon Jung et al.
SOLAR RRL (2020)
Solution-Processable 2D α-In2Se3 as an Efficient Hole Transport Layer for High-Performance and Stable Polymer Solar Cells
Jianming Wang et al.
SOLAR RRL (2020)
Liquid phase exfoliation of MoS2 and WS2 in aqueous ammonia and their application in highly efficient organic solar cells
Begimai Adilbekova et al.
JOURNAL OF MATERIALS CHEMISTRY C (2020)
Hole transport layers for organic solar cells: recent progress and prospects
Haitao Xu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
An inorganic molecule-induced electron transfer complex for highly efficient organic solar cells
Qian Kang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Increased Electron Transport and Hole Blocking in an Aqueous Solution Processed Dye-Doped ZnO Cathode Interlayer for High Performance Organic Solar Cells
Yinqi Luo et al.
ACS APPLIED ENERGY MATERIALS (2020)
Modifying the nanostructures of PEDOT:PSS/Ti3C2TX composite hole transport layers for highly efficient polymer solar cells
Chunli Hou et al.
JOURNAL OF MATERIALS CHEMISTRY C (2020)
CuSCN as Hole Transport Material with 3D/2D Perovskite Solar Cells
Vinod E. Madhavan et al.
ACS APPLIED ENERGY MATERIALS (2020)
Over 17% efficiency ternary organic solar cells enabled by two non-fullerene acceptors working in an alloy-like model
Lingling Zhan et al.
ENERGY & ENVIRONMENTAL SCIENCE (2020)
Enhancing the performance of polymer solar cells using solution-processed copper doped nickel oxide nanoparticles as hole transport layer
Shuai Huang et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)
Cosensitization in Dye-Sensitized Solar Cells
Jacqueline M. Cole et al.
CHEMICAL REVIEWS (2019)
Solution processed hybrid Graphene-MoO3 hole transport layers for improved performance of organic solar cells
Yang Dang et al.
ORGANIC ELECTRONICS (2019)
Enhancing the electron blocking ability of n-type MoO3 by doping with p-type NiOx for efficient nonfullerene polymer solar cells
Yiming Bai et al.
ORGANIC ELECTRONICS (2019)
Plasmonic effects of Ag nanoparticles for absorption enhancement in polymer solar cells with MoO3 passivation layer
P. Shamjid et al.
PHYSICA B-CONDENSED MATTER (2019)
Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages
Yong Cui et al.
NATURE COMMUNICATIONS (2019)
Tunability of MoO3 Thin-Film Properties Due to Annealing in Situ Monitored by Hard X-ray Photoemission
Xiaxia Liao et al.
ACS OMEGA (2019)
17% Efficient Organic Solar Cells Based on Liquid Exfoliated WS2 as a Replacement for PEDOT:PSS
Yuanbao Lin et al.
ADVANCED MATERIALS (2019)
Molecular Tuning of Titanium Complexes with Controllable Work Function for Efficient Organic Photovoltaics
Rui Wang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2019)
In-situ synthesis of organic-inorganic hybrid thin film of PEDOT/V2O5 as hole transport layer for polymer solar cells
Hanbing Ling et al.
SOLAR ENERGY (2019)
Solution-Processed Metal Oxide Nanocrystals as Carrier Transport Layers in Organic and Perovskite Solar Cells
Dan Ouyang et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Efficient organic-inorganic hybrid cathode interfacial layer enabled by polymeric dopant and its application in large-area polymer solar cells
Sheng Dong et al.
SCIENCE CHINA-CHEMISTRY (2019)
PEG-assisted Sol-gel Synthesis of Compact Nickel Oxide Hole-Selective Layer with Modified Interfacial Properties for Organic Solar Cells
Jung Kyu Kim
POLYMERS (2019)
Amino-Functionalized Graphene Quantum Dots as Cathode Interlayer for Efficient Organic Solar Cells: Quantum Dot Size on Interfacial Modification Ability and Photovoltaic Performance
Shichao Wang et al.
ADVANCED MATERIALS INTERFACES (2019)
MXenes with tunable work functions and their application as electron- and hole-transport materials in non-fullerene organic solar cells
Zhimeng Yu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Solution-processable Ti3C2Tx nanosheets as an efficient hole transport layer for high-performance and stable polymer solar cells
Chunli Hou et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
A Printable Organic Cathode Interlayer Enables over 13% Efficiency for 1-cm2 Organic Solar Cells
Qian Kang et al.
JOULE (2019)
Perylene diimide-based cathode interfacial materials: adjustable molecular structures and conformation, optimized film morphology, and much improved performance of non-fullerene polymer solar cells
Yaqin Li et al.
MATERIALS CHEMISTRY FRONTIERS (2019)
Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core
Jun Yuan et al.
JOULE (2019)
Solution-processable n-doped graphene-containing cathode interfacial materials for high-performance organic solar cells
Fei Pan et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices
Jinbo Pang et al.
ADVANCED ENERGY MATERIALS (2018)
Perylene Diimide-Based Zwitterion as the Cathode Interlayer for High-Performance Nonfullerene Polymer Solar Cells
Changjian Song et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Tetraphenylphosphonium Bromide as a Cathode Buffer Layer Material for Highly Efficient Polymer Solar Cells
Monika Gupta et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Conjugated Polyelectrolyte Blend with Polyethyleneimine Ethoxylated for Thickness-Insensitive Electron Injection Layers in Organic Light-Emitting Devices
Satoru Ohisa et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Polymer Solar Cells with 90% External Quantum Efficiency Featuring an Ideal Light- and Charge-Manipulation Layer
Jing-De Chen et al.
ADVANCED MATERIALS (2018)
A green route to a novel hyperbranched electrolyte interlayer for nonfullerene polymer solar cells with over 11% efficiency
Dan Zhou et al.
CHEMICAL COMMUNICATIONS (2018)
Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells
Guangye Zhang et al.
CHEMICAL REVIEWS (2018)
Low-temperature, aqueous solution-processed V2O5 as the hole-transport layer for high performance organic solar cells
Mei-Feng Xu et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)
Organic solar cells based on non-fullerene acceptors
Jianhui Hou et al.
NATURE MATERIALS (2018)
Electrospray-deposited vanadium oxide anode interlayers for high-efficiency organic solar cells
Hima A. Kavuri et al.
ORGANIC ELECTRONICS (2018)
A versatile solution-processed MoO3/Au nanoparticles/MoO3 hole contact for high performing PEDOT:PSS-free organic solar cells
Weidong Zhang et al.
ORGANIC ELECTRONICS (2018)
A facile synthesis of segmented silver nanowires and enhancement of the performance of polymer solar cells
You Wei et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2018)
Significant improvement in the photovoltaic stability of bulk heterojunction organic solar cells by the molecular level interaction of graphene oxide with a PEDOT: PSS composite hole transport layer
Muhammad Hilal et al.
SOLAR ENERGY (2018)
Over 100-nm-Thick MoOx Films with Superior Hole Collection and Transport Properties for Organic Solar Cells
Bei Yang et al.
ADVANCED ENERGY MATERIALS (2018)
Material insights and challenges for non-fullerene organic solar cells based on small molecular acceptors
Jianquan Zhang et al.
NATURE ENERGY (2018)
Tailoring properties of nanostructured MoO3-x thin films by aqueous solution deposition
Katherine Inzani et al.
APPLIED SURFACE SCIENCE (2018)
Assessing the suitability of copper thiocyanate as a hole-transport layer in inverted CsSnI3 perovskite photovoltaics
Anjana Wijesekara et al.
SCIENTIFIC REPORTS (2018)
Small-Molecule Electron Acceptors for Efficient Non-fullerene Organic Solar Cells
Zhenzhen Zhang et al.
FRONTIERS IN CHEMISTRY (2018)
Improved charge transport via WSe2-mediated hole transporting layer toward efficient organic solar cells
Donghwan Koo et al.
SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2018)
Tris(8-hydroxyquinoline)aluminum(III)-Cored Molecular Cathode Interlayer: Improving Electron Mobility and Photovoltaic Efficiency of Polymer Solar Cells
Zuojia Li et al.
SOLAR RRL (2018)
Interface design for high-efficiency non-fullerene polymer solar cells
Chen Sun et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Efficient Organic Photovoltaics with Improved Charge Extraction and High Short-Circuit Current
Minu Mohan et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2017)
Enhanced power conversion efficiency of organic photovoltaic devices due to the surface plasmonic resonance effect generated utilizing Au-WO3 nanocomposites
Yong Hun Lee et al.
ORGANIC ELECTRONICS (2017)
Impedance investigation of the highly efficient polymer solar cells with composite CuBr2/MoO3 hole transport layer
Zhiqi Li et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)
Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%
Neha Arora et al.
SCIENCE (2017)
Transition metal oxides as hole-transporting materials in organic semiconductor and hybrid perovskite based solar cells
Pingli Qin et al.
SCIENCE CHINA-CHEMISTRY (2017)
Efficient Organic Solar Cells with Non-Fullerene Acceptors
Shuixing Li et al.
SMALL (2017)
Improved performance for polymer solar cells using CTAB-modified MoO3 as an anode buffer layer
Yanping Li et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Thick Film Polymer Solar Cells Based on Naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole Conjugated Polymers with Efficiency over 11%
Yaocheng Jin et al.
ADVANCED ENERGY MATERIALS (2017)
Enhancing the performance and stability of organic solar cells using solution processed MoO3 as hole transport layer
Fei Cheng et al.
RSC ADVANCES (2017)
A simple synthesis method to prepare a molybdenum oxide hole-transporting layer for efficient polymer solar cells
Yanping Li et al.
RSC ADVANCES (2017)
Recent progress in layered transition metal carbides and/or nitrides (MXenes) and their composites: synthesis and applications
Vincent Ming Hong Ng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Modifying the valence state of molybdenum in the efficient oxide buffer layer of organic solar cells via a mild hydrogen peroxide treatment
Shuren Cong et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
Electronic properties and applications of MXenes: a theoretical review
Mohammad Khazaei et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
2D transition metal dichalcogenides
Sajedeh Manzeli et al.
NATURE REVIEWS MATERIALS (2017)
2D metal carbides and nitrides (MXenes) for energy storage
Babak Anasori et al.
NATURE REVIEWS MATERIALS (2017)
Incorporating an Electrode Modification Layer with a Vertical Phase Separated Photoactive Layer for Efficient and Stable Inverted Nonfullerene Polymer Solar Cells
Zhenzhen Shi et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Doping of Hole Transport Layer PEDOT: PSS with Pentacene for PCDTBT: PCBM Based Organic Solar Cells
G. Sivakumar et al.
MATERIALS TODAY-PROCEEDINGS (2017)
Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2TX MXene)
Mohamed Alhabeb et al.
CHEMISTRY OF MATERIALS (2017)
Facile Approach to Preparing a Vanadium Oxide Hydrate Layer as a Hole-Transport Layer for High-Performance Polymer Solar Cells
Hailin Cong et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Recent Advances in Ultrathin Two-Dimensional Nanomaterials
Chaoliang Tan et al.
CHEMICAL REVIEWS (2017)
Colloidal metal oxide nanocrystals as charge transporting layers for solution-processed light-emitting diodes and solar cells
Xiaoyong Liang et al.
CHEMICAL SOCIETY REVIEWS (2017)
Conjugated Polymer Zwitterions: Efficient Interlayer Materials in Organic Electronics
Yao Liu et al.
ACCOUNTS OF CHEMICAL RESEARCH (2016)
High Efficiency Inverted Organic Solar Cells with a Neutral Fulleropyrrolidine Electron-Collecting Interlayer
Weidong Xu et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Improved Performance of Polymer Solar Cells by Thermal Evaporation of AgAl Alloy Nanostructures into the Hole-Transport Layer
Jinfeng Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Enhancement of Photovoltaic Performance by Utilizing Readily Accessible Hole Transporting Layer of Vanadium(V) Oxide Hydrate in a Polymer-Fullerene Blend Solar Cell
Youyu Jiang et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Plasmonic Periodic Nanodot Arrays via Laser Interference Lithography for Organic Photovoltaic Cells with >10% Efficiency
Yulin Oh et al.
ACS NANO (2016)
Fullerene-Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability
Wenchao Zhao et al.
ADVANCED MATERIALS (2016)
V2O5 thin film deposition for application in organic solar cells
Elhadi A. A. Arbab et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)
Inverted organic light-emitting diodes with an electrochemically deposited zinc oxide electron injection layer
Makoto Takada et al.
JOURNAL OF APPLIED PHYSICS (2016)
n-Type Water/Alcohol-Soluble Naphthalene Diimide-Based Conjugated Polymers for High-Performance Polymer Solar Cells
Zhihong Wu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Doped polymer semiconductors with ultrahigh and ultralow work functions for ohmic contacts
Cindy C. Tang et al.
NATURE (2016)
Metal oxides for optoelectronic applications
Xinge Yu et al.
NATURE MATERIALS (2016)
Broadband plasmon-enhanced polymer solar cells with power conversion efficiency of 9.26% using mixed Au nanoparticles
Jingyu Hao et al.
OPTICS COMMUNICATIONS (2016)
Effect of annealing-induced oxidation of molybdenum oxide on organic photovoltaic device performance
Toshifumi Kobori et al.
ORGANIC ELECTRONICS (2016)
Solvents effects on the hole transport layer in organic solar cells performance
Tarek M. Abdel-Fattah et al.
SOLAR ENERGY (2016)
All-solution processed double-decked PEDOT:PSS/V2O5 nanowires as buffer layer of high performance polymer photovoltaic cells
Jing Pan et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)
Thermally Stable Solution Processed Vanadium Oxide as a Hole Extraction Layer in Organic Solar Cells
Abdullah Alsulami et al.
MATERIALS (2016)
New PDI-based small-molecule cathode interlayer material with strong electron extracting ability for polymer solar cells
Zelin Li et al.
RSC ADVANCES (2016)
Room temperature-processed inverted organic solar cells using high working-pressure-sputtered ZnO films
Il Jeon et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Enhanced organic solar cells efficiency through electronic and electro-optic effects resulting from charge transfers in polymer hole transport blends
Calvyn T. Howells et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Functionalized graphene quantum dots as a novel cathode interlayer of polymer solar cells
Zicheng Ding et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
An aqueous solution-processed CuOX film as an anode buffer layer for efficient and stable organic solar cells
Zhikai Yu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Solution-processed VOx prepared using a novel synthetic method as the hole extraction layer for polymer solar cells
Wenzhan Xu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Unexpected fluorescent emission of graft sulfonated-acetone-formaldehyde lignin and its application as a dopant of PEDOT for high performance photovoltaic and light-emitting devices
Nanlong Hong et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Solution-processable MoOx nanocrystals enable highly efficient reflective and semitransparent polymer solar cells
Lethy Krishnan Jagadamma et al.
NANO ENERGY (2016)
High-Performance Polymer Solar Cells Based on a Wide-Bandgap Polymer Containing Pyrrolo[3,4-f]benzotriazole-5,7-dione with a Power Conversion Efficiency of 8.63%
Liuyuan Lan et al.
ADVANCED SCIENCE (2016)
Interfacial Materials for Organic Solar Cells: Recent Advances and Perspectives
Zhigang Yin et al.
ADVANCED SCIENCE (2016)
Efficient organic solar cells processed from hydrocarbon solvents
Jingbo Zhao et al.
NATURE ENERGY (2016)
Solution-Processed MoO3:PEDOT:PSS Hybrid Hole Transporting Layer for Inverted Polymer Solar Cells
Yiling Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Post-treatment-Free Solution-Processed Non-stoichiometric NiOx Nanoparticles for Efficient Hole-Transport Layers of Organic Optoelectronic Devices
Fei Jiang et al.
ADVANCED MATERIALS (2015)
An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells
Yuze Lin et al.
ADVANCED MATERIALS (2015)
Physicochemical properties of sprayed V2O5 thin films: Effect of substrate temperature
A. A. Mane et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2015)
Alcohol-Soluble n-Type Conjugated Polyelectrolyte as Electron Transport Layer for Polymer Solar Cells
Lin Hu et al.
MACROMOLECULES (2015)
Solution-processed inorganic copper(I) thiocyanate (CuSCN) hole transporting layers for efficient p-i-n perovskite solar cells
K. Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
MoOx and V2Ox as hole and electron transport layers through functionalized intercalation in normal and inverted organic optoelectronic devices
Xinchen Li et al.
LIGHT-SCIENCE & APPLICATIONS (2015)
Design Considerations for Electrode Buffer Layer Materials in Polymer Solar Cells
David Bilby et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
25th Anniversary Article: MXenes: A New Family of Two-Dimensional Materials
Michael Naguib et al.
ADVANCED MATERIALS (2014)
Solution-Processed 2D Niobium Diselenide Nanosheets as Efficient Hole-Transport Layers in Organic Solar Cells
Xing Gu et al.
CHEMSUSCHEM (2014)
Perylene diimides: a thickness-insensitive cathode interlayer for high performance polymer solar cells
Zhi-Guo Zhang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
UV/ozone-treated WS2 hole-extraction layer in organic photovoltaic cells
Quyet Van Le et al.
PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2014)
Dual use of tantalum disulfides as hole and electron extraction layers in organic photovoltaic cells
Quyet Van Le et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Fluorene-based cathode interlayer polymers for high performance solution processed organic optoelectronic devices
Weidong Xu et al.
ORGANIC ELECTRONICS (2014)
Au nanoparticles on ultrathin MoS2 sheets for plasmonic organic solar cells
Xi Yang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Engineering crystalline structures of two-dimensional MoS2 sheets for high-performance organic solar cells
Xi Yang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Electron and Hole Transport Layers: Their Use in Inverted Bulk Heterojunction Polymer Solar Cells
Sandro Lattante
ELECTRONICS (2014)
Solution-Processed Fe3O4 Magnetic Nanoparticle Thin Film Aligned by an External Magnetostatic Field as a Hole Extraction Layer for Polymer Solar Cells
Kai Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Interface Control of Semiconducting Metal Oxide Layers for Efficient and Stable Inverted Polymer Solar Cells with Open-Circuit Voltages over 1.0 Volt
Zhigang Yin et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Air-Stable Efficient Inverted Polymer Solar Cells Using Solution-Processed Nanocrystalline ZnO Interfacial Layer
Mein Jin Tan et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Solution-Processed Nickel Oxide Hole Transport Layers in High Efficiency Polymer Photovoltaic Cells
Jesse R. Manders et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
A fluorenone based low band gap solution processable copolymer for air stable and high mobility organic field effect transistors
Prashant Sonar et al.
CHEMICAL COMMUNICATIONS (2013)
Low-temperature, solution-processed, layered V2O5 hydrate as the hole-transport layer for stable organic solar cells
Gerardo Teran-Escobar et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Structural and optical properties of nanostructural V2O5 thin films deposited by spray pyrolysis technique: Effect of the substrate temperature
R. Irani et al.
MATERIALS CHEMISTRY AND PHYSICS (2013)
The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets
Manish Chhowalla et al.
NATURE CHEMISTRY (2013)
Cation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide
Maria R. Lukatskaya et al.
SCIENCE (2013)
A Solution-Processed Hole Extraction Layer Made from Ultrathin MoS2 Nanosheets for Efficient Organic Solar Cells
Xing Gu et al.
ADVANCED ENERGY MATERIALS (2013)
Slot-Die Coating of a High Performance Copolymer in a Readily Scalable Roll Process for Polymer Solar Cells
Martin Helgesen et al.
ADVANCED ENERGY MATERIALS (2013)
Efficient work-function engineering of solution-processed MoS2 thin-films for novel hole and electron transport layers leading to high-performance polymer solar cells
Jin-Mun Yun et al.
JOURNAL OF MATERIALS CHEMISTRY C (2013)
Transition Metal Oxides for Organic Electronics: Energetics, Device Physics and Applications
Jens Meyer et al.
ADVANCED MATERIALS (2012)
All printed transparent electrodes through an electrical switching mechanism: A convincing alternative to indium-tin-oxide, silver and vacuum
Thue T. Larsen-Olsen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells
Hin-Lap Yip et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Effects of buffer layer properties and annealing process on bulk heterojunction morphology and organic solar cell performance
Panagiotis G. Karagiannidis et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Influence of a novel fluorosurfactant modified PEDOT:PSS hole transport layer on the performance of inverted organic solar cells
Fang Jeng Lim et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Solution processed WO3 layer for the replacement of PEDOT:PSS layer in organic photovoltaic cells
Hana Choi et al.
ORGANIC ELECTRONICS (2012)
A Universal Method to Produce Low-Work Function Electrodes for Organic Electronics
Yinhua Zhou et al.
SCIENCE (2012)
Inverted Organic Solar Cells with Sol-Gel Processed High Work-Function Vanadium Oxide Hole-Extraction Layers
Kirill Zilberberg et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Simultaneous Enhancement of Open-Circuit Voltage, Short-Circuit Current Density, and Fill Factor in Polymer Solar Cells
Zhicai He et al.
ADVANCED MATERIALS (2011)
Solution-Processable Reduced Graphene Oxide as a Novel Alternative to PEDOT:PSS Hole Transport Layers for Highly Efficient and Stable Polymer Solar Cells
Jin-Mun Yun et al.
ADVANCED MATERIALS (2011)
Inverted Polymer Solar Cells Integrated with a Low-Temperature-Annealed Sol-Gel-Derived ZnO Film as an Electron Transport Layer
Yanming Sun et al.
ADVANCED MATERIALS (2011)
Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Michael Naguib et al.
ADVANCED MATERIALS (2011)
Electronic structure of Vanadium pentoxide: An efficient hole injector for organic electronic materials
J. Meyer et al.
JOURNAL OF APPLIED PHYSICS (2011)
Improved High-Efficiency Organic Solar Cells via Incorporation of a Conjugated Polyelectrolyte Interlayer
Jung Hwa Seo et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells
Eszter Voroshazi et al.
ORGANIC ELECTRONICS (2011)
Solution Processed Vanadium Pentoxide as Charge Extraction Layer for Organic Solar Cells
Kirill Zilberberg et al.
ADVANCED ENERGY MATERIALS (2011)
Solution-Processable Graphene Oxide as an Efficient Hole Transport Layer in Polymer Solar Cells
Shao-Sian Li et al.
ACS NANO (2010)
Efficiency Enhancement in Organic Photovoltaic Cells: Consequences of Optimizing Series Resistance
Jonathan D. Servaites et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Water/alcohol soluble conjugated polymers as highly efficient electron transporting/injection layer in optoelectronic devices
Fei Huang et al.
CHEMICAL SOCIETY REVIEWS (2010)
Structure, Optical, and Catalytic Properties of Novel Hexagonal Metastable h-MoO3 Nano- and Microrods Synthesized with Modified Liquid-Phase Processes
Wenzhi Pan et al.
CHEMISTRY OF MATERIALS (2010)
Preparation and characterization of ZnO transparent semiconductor thin films by sol-gel method
Chien-Yie Tsay et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Inverted Organic Solar Cells with ZnO Thin Films Prepared by Sol-Gel Method
Hye-Jeong Park et al.
JOURNAL OF NANOELECTRONICS AND OPTOELECTRONICS (2010)
Recent Progress in Polymer Solar Cells: Manipulation of Polymer: Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar Cells
Li-Min Chen et al.
ADVANCED MATERIALS (2009)
Role of tungsten oxide in inverted polymer solar cells
Chen Tao et al.
APPLIED PHYSICS LETTERS (2009)
Enhancement of conductivity and transmittance of ZnO films by post hydrogen plasma treatment
P. F. Cai et al.
JOURNAL OF APPLIED PHYSICS (2009)
Improving performance of organic solar cells using amorphous tungsten oxides as an interfacial buffer layer on transparent anodes
Seungchan Han et al.
ORGANIC ELECTRONICS (2009)
An inverted organic solar cell employing a sol-gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer
A. K. K. Kyaw et al.
APPLIED PHYSICS LETTERS (2008)
Solution-processed poly(3-hexylthiophene) vertical organic transistor
Sheng-Han Li et al.
APPLIED PHYSICS LETTERS (2008)
Inorganic photovoltaic cells
Robert W. Miles et al.
MATERIALS TODAY (2007)
Highly efficient simplified organic light emitting diodes
J. Meyer et al.
APPLIED PHYSICS LETTERS (2007)
Device physics of polymer:fullerene bulk heterojunction solar cells
Paul W. M. Blom et al.
ADVANCED MATERIALS (2007)
Metal oxides for solid-state gas sensors: What determines our choice?
G. Korotcenkov
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2007)
Investigation of Al- and Ag-based top-emitting organic light-emitting diodes with metal oxides as hole-injection layer
Xiuling Zhu et al.
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS (2007)
Metal oxide-based gas sensor research: How to?
N. Barsan et al.
SENSORS AND ACTUATORS B-CHEMICAL (2007)
Structural and optical properties Of MoO3 andV2O5 thin films prepared by Spray Pyrolysis
L Boudaoud et al.
CATALYSIS TODAY (2006)
Transition metal oxides as the buffer layer for polymer photovoltaic cells
V Shrotriya et al.
APPLIED PHYSICS LETTERS (2006)
High-performance organic thin-film transistors with metal oxide/metal bilayer electrode
CW Chu et al.
APPLIED PHYSICS LETTERS (2005)
High-efficiency, environment-friendly electroluminescent polymers with stable high work function metal as a cathode: Green- and yellow-emitting conjugated polyfluorene polyelectrolytes and their neutral precursors
F Huang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2004)
Characterization of tungsten surfaces by simultaneous work function and secondary electron emission measurements
G Vida et al.
MICROSCOPY AND MICROANALYSIS (2003)
Ultrafast singlet excited-state polarization in electronically asymmetric ethyne-bridged bis[(porphinato)zinc(II)] complexes
IV Rubtsov et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2003)
Blocking reactions between indium-tin oxide and poly (3,4-ethylene dioxythiophene):poly(styrene sulphonate) with a self-assembly monolayer
KW Wong et al.
APPLIED PHYSICS LETTERS (2002)
Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes
MP de Jong et al.
APPLIED PHYSICS LETTERS (2000)