相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Using a Cable-Driven Parallel Robot with Applications in 3D Concrete Printing
Tuong Phuoc Tho et al.
APPLIED SCIENCES-BASEL (2021)
Effect of selection criterion on the kineto-static solution of a redundant cable-driven parallel robot considering cable mass and elasticity
Ishan Chawla et al.
MECHANISM AND MACHINE THEORY (2021)
A Reaction-Based Stabilizer for Nonmodel-Based Vibration Control of Cable-Driven Parallel Robots
Hamed Jamshidifar et al.
IEEE TRANSACTIONS ON ROBOTICS (2021)
Optimal Force Allocation for Overconstrained Cable-Driven Parallel Robots: Continuously Differentiable Solutions With Assessment of Computational Efficiency
Einar Ueland et al.
IEEE TRANSACTIONS ON ROBOTICS (2021)
An approximately analytical solution method for the cable-driven parallel robot in FAST
Jia-Ning Yin et al.
RESEARCH IN ASTRONOMY AND ASTROPHYSICS (2021)
A Non-Linear Continuous-Time Generalized Predictive Control for a Planar Cable-Driven Parallel Robot
Fouad Inel et al.
ACTUATORS (2021)
Task-Based Design Approach: Development of a Planar Cable-Driven Parallel Robot for Upper Limb Rehabilitation
Ferdaws Ennaiem et al.
APPLIED SCIENCES-BASEL (2021)
Sensitivity Based Selection of an Optimal Cable-Driven Parallel Robot Design for Rehabilitation Purposes
Ferdaws Ennaiem et al.
ROBOTICS (2021)
Design and analysis of the cable-driven parallel robot for cleaning exterior wall of buildings
Zhufeng Shao et al.
INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS (2021)
Second-Order Sliding-Mode-Based Synchronization Control of Cable-Driven Parallel Robots
Huaiyuan Jia et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2020)
Modal Control for Active Vibration Damping of Cable-Driven Parallel Robots
Loic Cuvillon et al.
JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2020)
A Deployable Cable-Driven Parallel Robot With Large Rotational Capabilities for Laser-Scanning Applications
Edoardo Ida et al.
IEEE ROBOTICS AND AUTOMATION LETTERS (2020)
Design, comprehensive evaluation, and experimental study of a cable-driven parallel robot for lower limb rehabilitation
Yan-lin Wang et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)
Redundancy Resolution Integrated Model Predictive Control of CDPRs: Concept, Implementation and Experiments
Joao C. Santos et al.
2020 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA) (2020)
Stiffness optimization of a cable driven parallel robot for additive manufacturing
D. Gueners et al.
2020 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA) (2020)
Workspace and Stiffness Analysis of 3D Printing Cable-Driven Parallel Robot with a Retractable Beam-Type End-Effector
Jinwoo Jung
ROBOTICS (2020)
Robust 21/2D Visual Servoing of A Cable-Driven Parallel Robot Thanks to Trajectory Tracking
Zane Zake et al.
IEEE ROBOTICS AND AUTOMATION LETTERS (2020)
Cable interference control in physical interaction for cable-driven parallel mechanisms
Ramy Meziane et al.
MECHANISM AND MACHINE THEORY (2019)
Dynamically feasible motions of a class of purely-translational cable-suspended parallel robots
Giovanni Mottola et al.
MECHANISM AND MACHINE THEORY (2019)
Design, stiffness analysis and experimental study of a cable-driven parallel 3D printer
Bin Zi et al.
MECHANISM AND MACHINE THEORY (2019)
Modeling of a heavy-lift airship carrying a payload by a cable-driven parallel manipulator
Fida Ben Abdallah et al.
INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS (2019)
Wrench Analysis of Cable-Suspended Parallel Robots Actuated by Quadrotor Unmanned Aerial Vehicles
Julian Erskine et al.
JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2019)
Design and Experimental Research of Movable Cable-Driven Lower Limb Rehabilitation Robot
Yupeng Zou et al.
IEEE ACCESS (2019)
Flexible Cable-Driven Parallel Manipulator Control: Maintaining Positive Cable Tensions
Ryan James Caverly et al.
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY (2018)
Periodic Trajectory Planning Beyond the Static Workspace for 6-DOF Cable-Suspended Parallel Robots
Xiaoling Jiang et al.
IEEE TRANSACTIONS ON ROBOTICS (2018)
Vibration Decoupled Modeling and Robust Control of Redundant Cable-Driven Parallel Robots
Hamed Jamshidifar et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2018)
Dynamic Point-to-Point Trajectory Planning of a Three-DOF Cable-Suspended Mechanism Using the Hypocycloid Curve
Pascal Dion-Gauvin et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2018)
Workspace analysis of a Gough-Stewart type cable marine platform subjected to harmonic water waves
Mamon M. Horoub et al.
MECHANISM AND MACHINE THEORY (2018)
Oscillation damping of nonlinear control systems based on the phase trajectory length concept: An experimental case study on a cable-driven parallel robot
Mojtaba Zarei et al.
MECHANISM AND MACHINE THEORY (2018)
Dynamic trajectory planning for a spatial 3-DoF cable-suspended parallel robot
Nan Zhang et al.
MECHANISM AND MACHINE THEORY (2018)
Experimental study on the kinematic control of a cable suspended parallel robot for object tracking purpose
Ali Aflakian et al.
MECHATRONICS (2018)
A Review on Cable-driven Parallel Robots
Sen Qian et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2018)
Precise end-effector pose estimation in spatial cable-driven parallel robots with elastic cables using a data fusion method
M. H. Korayem et al.
MEASUREMENT (2018)
On the Design of a Three-DOF Cable-Suspended Parallel Robot Based on a Parallelogram Arrangement of the Cables
Dinh-Son Vu et al.
CABLE-DRIVEN PARALLEL ROBOTS (2018)
Optimal Design of a High-Speed Pick-and-Place Cable-Driven Parallel Robot
Zhaokun Zhang et al.
CABLE-DRIVEN PARALLEL ROBOTS (2018)
A Topological Approach to Workspace and Motion Planning for a Cable-Controlled Robot in Cluttered Environments
Xiaolong Wang et al.
IEEE ROBOTICS AND AUTOMATION LETTERS (2018)
Port Hamiltonian Modeling of a Cable Driven Robot
Christian Schenk et al.
IFAC PAPERSONLINE (2018)
Design of a Cable-Driven Parallel Robot with Grasping Device
Antoine Martin et al.
28TH CIRP DESIGN CONFERENCE 2018 (2018)
Parasitic Inclinations in Cable-Driven Parallel Robots using Cable Loops
Saman Lessanibahri et al.
28TH CIRP DESIGN CONFERENCE 2018 (2018)
Adaptive neural network control of cable-driven parallel robots with input saturation
Hamed Jabbari Asl et al.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2017)
Geometry-Based Trajectory Planning of a 3-3 Cable-Suspended Parallel Robot
Nan Zhang et al.
IEEE TRANSACTIONS ON ROBOTICS (2017)
Stable assist-as-needed controller design for a planar cable-driven robotic system
Hamed Jabbari Asl et al.
INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS (2017)
Dynamics and Control of a 6-dof Cable-driven Parallel Robot with Visco-elastic Cables in Presence of Measurement Noise
M. Habibnejad Korayem et al.
JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS (2017)
Control of cable-driven manipulators in the presence of friction
S. Abdelaziz et al.
MECHANISM AND MACHINE THEORY (2017)
On the effects of the design of cable-Driven robots on kinematics and dynamics models accuracy
A. Gonzalez-Rodriguez et al.
MECHATRONICS (2017)
The trajectory generation algorithm for the cable-suspended parallel robot-The CPR Trajectory Solver
Ljubinko Kevac et al.
ROBOTICS AND AUTONOMOUS SYSTEMS (2017)
Trajectory planning of a suspended cable driven parallel robot with reconfigurable end effector
L. Barbazza et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2017)
Force Control Strategy and Bench Press Experimental Research of a Cable Driven Astronaut Rehabilitative Training Robot
Lixun Zhang et al.
IEEE ACCESS (2017)
Dynamic Modeling and Feedback Linearization Control of Wheeled Mobile Cable-Driven Parallel Robot Considering Cable Sag
M. H. Korayem et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2017)
Solving the direct geometrico-static problem of underconstrained cable-driven parallel robots by interval analysis
Alessandro Berti et al.
INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH (2016)
A modular cable robot for inspection and light manipulation on celestial bodies
S. Seriani et al.
ACTA ASTRONAUTICA (2016)
Planning Wrench-Feasible Motions for Cable-Driven Hexapods
Oriol Bohigas et al.
IEEE TRANSACTIONS ON ROBOTICS (2016)
Dynamic Point-to-Point Trajectory Planning of a Three-DOF Cable-Suspended Parallel Robot
Xiaoling Jiang et al.
IEEE TRANSACTIONS ON ROBOTICS (2016)
Mechatronic Implementation of a Force Optimal Underconstrained Planar Cable Robot
Sean P. Donohoe et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2016)
Adaptive Control with a Fuzzy Tuner for Cable-based Rehabilitation Robot
Jin Yang et al.
INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS (2016)
Trajectory generation to suppress oscillations in under-constrained cable-driven parallel robots
Sung Wook Hwang et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)
Discrete reconfiguration planning for Cable-Driven Parallel Robots
L. Gagliardini et al.
MECHANISM AND MACHINE THEORY (2016)
Optimum kinematic design of a planar cable-driven parallel robot with wrench-closure gait trajectory
Ghasem Abbasnejad et al.
MECHANISM AND MACHINE THEORY (2016)
Adaptive robust control of fully constrained cable robots: singular perturbation approach
Reza Babaghasabha et al.
NONLINEAR DYNAMICS (2016)
An optimal arrangement of mooring lines for the three-tether submerged point-absorbing wave energy converter
N. Y. Sergiienko et al.
RENEWABLE ENERGY (2016)
An experimental study on the vision-based control and identification of planar cable-driven parallel robots
Hassan Bayani et al.
ROBOTICS AND AUTONOMOUS SYSTEMS (2016)
Dynamic Modeling and Passivity-Based Control of a Single Degree of Freedom Cable-Actuated System
Ryan James Caverly et al.
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY (2015)
Geometry Selection of a Redundantly Actuated Cable-Suspended Parallel Robot
Marc Gouttefarde et al.
IEEE TRANSACTIONS ON ROBOTICS (2015)
Static and dynamic stiffness analyses of cable-driven parallel robots with non-negligible cable mass and elasticity
Han Yuan et al.
MECHANISM AND MACHINE THEORY (2015)
Effect on wrench-feasible workspace of cable-driven parallel robots by adding springs
Qingjuan Duan et al.
MECHANISM AND MACHINE THEORY (2015)
Workspace optimization for a planar cable-suspended direct-driven robot
S. Seriani et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2015)
Large-scale 3D printing with a cable-suspended robot
Eric Barnett et al.
ADDITIVE MANUFACTURING (2015)
A Reconfigurable Cable-Driven Parallel Robot for Sandblasting and Painting of Large Structures
Lorenzo Gagliardini et al.
CABLE-DRIVEN PARALLEL ROBOTS (2015)
Comparative study of cable parallel manipulators with and without hybrid-driven planar five-bar mechanism
Bin Zi et al.
APPLIED MATHEMATICAL MODELLING (2014)
Sophia-3: A Semiadaptive Cable-Driven Rehabilitation Device With a Tilting Working Plane
Damiano Zanotto et al.
IEEE TRANSACTIONS ON ROBOTICS (2014)
Synthesis of Differentially Driven Planar Cable Parallel Manipulators
Hamed Khakpour et al.
IEEE TRANSACTIONS ON ROBOTICS (2014)
Dynamic Modeling and Control of Parallel Robots With Elastic Cables: Singular Perturbation Approach
Mohammad A. Khosravi et al.
IEEE TRANSACTIONS ON ROBOTICS (2014)
Approximate static balancing of a planar parallel cable-driven mechanism based on four-bar linkages and springs
Simon Perreault et al.
MECHANISM AND MACHINE THEORY (2014)
Robust PID control of fully-constrained cable driven parallel robots
Mohammad A. Khosravi et al.
MECHATRONICS (2014)
Kinematics and error analysis of cooperative cable parallel manipulators for multiple mobile cranes
Sen Qian et al.
INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN (2014)
The Inverse Kinematics of Cooperative Transport With Multiple Aerial Robots
Qimi Jiang et al.
IEEE TRANSACTIONS ON ROBOTICS (2013)
Workspace and stiffness analysis of a three-degree-of-freedom spatial cable-suspended parallel mechanism while considering cable mass
Marc Arsenault
MECHANISM AND MACHINE THEORY (2013)
Trajectory generation and tracking control of a multi-level hybrid support manipulator in FAST
Xiaoqiang Tang et al.
MECHATRONICS (2013)
Computing the lowest equilibrium pose of a cable-suspended rigid body
Jean-Francois Collard et al.
OPTIMIZATION AND ENGINEERING (2013)
The Five-hundred-meter Aperture Spherical radio Telescope (FAST) project
Rendong Nan et al.
RADIO AND ANTENNA DAYS OF THE INDIAN OCEAN (RADIO 2012) (2013)
Dynamic analysis of cable-driven parallel manipulators with time-varying cable lengths
Jingli Du et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2012)
CONTROLLABLE WORKSPACE OF CABLE-DRIVEN REDUNDANT PARALLEL MANIPULATORS BY FUNDAMENTAL WRENCH ANALYSIS
Azadeh Zarif Loloei et al.
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING (2012)
Conceptual Design and Static Analysis of Novel Planar Spring-Loaded Cable-Loop-Driven Parallel Mechanisms
Hanwei Liu et al.
JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2012)
Configuration Synthesis for Fully Restrained 7-Cable-Driven Manipulators
Xiaoqiang Tang et al.
INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS (2012)
A new experimental set-up based on a parallel cable robot for analysis and control of human motion
S. Bennour et al.
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING (2011)
An Analytic-Iterative Redundancy Resolution Scheme for Cable-Driven Redundant Parallel Manipulators
Hamid D. Taghirad et al.
IEEE TRANSACTIONS ON ROBOTICS (2011)
Planning and control for cooperative manipulation and transportation with aerial robots
Jonathan Fink et al.
INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH (2011)
On the determination of the force distribution in overconstrained cable-driven parallel mechanisms
Clement Gosselin et al.
MECCANICA (2011)
LAGRANGIAN DYNAMICS OF CABLE-DRIVEN PARALLEL MANIPULATORS: A VARIABLE MASS FORMULATION
Yousef B. Bedoustani et al.
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING (2011)
Dynamics modeling and simulating analysis of a Wire Driven Parallel Mechanism
Aofei Tang et al.
CEIS 2011 (2011)
Analysis of Cable-actuated Parallel Robot with Variable Length and Velocity cable
Q. J. Duan et al.
CEIS 2011 (2011)
Minimum-time trajectory planning of spatial cable-suspended robots along a specified path considering both tension and velocity constraints
Hamid Reza Fahham et al.
ENGINEERING OPTIMIZATION (2010)
Neural Network Solution for Forward Kinematics Problem of Cable Robots
Ali Ghasemi et al.
JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS (2010)
Deployment/Retrieval Modeling of Cable-Driven Parallel Robot
Q. J. Duan et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2010)
Underconstrained planar cable-direct-driven robots: A trajectory planning method ensuring positive and bounded cable tensions
Alberto Trevisani
MECHATRONICS (2010)
NIMS-PL: A Cable-Driven Robot With Self-Calibration Capabilities
Per Henrik Borgstrom et al.
IEEE TRANSACTIONS ON ROBOTICS (2009)
Design and Implementation of NIMS3D, a 3-D Cabled Robot for Actuated Sensing Applications
Per Henrik Borgstrom et al.
IEEE TRANSACTIONS ON ROBOTICS (2009)
Determination and Management of Cable Interferences Between Two 6-DOF Foot Platforms in a Cable-Driven Locomotion Interface
Martin J. -D. Otis et al.
IEEE TRANSACTIONS ON SYSTEMS MAN AND CYBERNETICS PART A-SYSTEMS AND HUMANS (2009)
Kinematics and Dynamics of a Self-Stressed Cartesian Cable-Driven Mechanism
Saeed Behzadipour
JOURNAL OF MECHANICAL DESIGN (2009)
Vibration analysis of cable-driven parallel manipulators
Xiumin Diao et al.
MULTIBODY SYSTEM DYNAMICS (2009)
Workspace Analysis for Planar and Spatial Redundant Cable Robots
Ali Ghasemi et al.
JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2009)
HandCARE: A Cable-Actuated Rehabilitation System to Train Hand Function After Stroke
Ludovic Dovat et al.
IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING (2008)
Dynamic modeling and active control of a cable-suspended Parallel robot
B. Zi et al.
MECHATRONICS (2008)
Design, implementation and clinical tests of a wire-based robot for neurorehabilitation
Giulio Rosati et al.
IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING (2007)
Cable-suspended robotic contour crafting system
Paul Bosscher et al.
AUTOMATION IN CONSTRUCTION (2007)
A new methodology for the determination of the workspace of six-DOF redundant parallel structures actuated by nine wires
Carlo Ferraresi et al.
ROBOTICA (2007)
Dynamics and control of a helicopter carrying a payload using a cable-suspended robot
So-Ryeok Oh et al.
JOURNAL OF MECHANICAL DESIGN (2006)
The feasible workspace analysis of a set point control for a cable-suspended robot with input constraints and disturbances
So-Ryeok Oh et al.
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY (2006)
Static analysis of cable-driven manipulators with non-negligible cable mass
Kris Kozak et al.
IEEE TRANSACTIONS ON ROBOTICS (2006)
Workspaces of cable-actuated parallel manipulators
E Stump et al.
JOURNAL OF MECHANICAL DESIGN (2006)
Fuzzy learning tracking of a parallel cable manipulator for the square kilometre array
YX Su et al.
MECHATRONICS (2005)
A reference governor-based controller for a cable robot under input constraints
SR Oh et al.
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY (2005)
Cable suspended planar robots with redundant cables: Controllers with positive tensions
SR Oh et al.
IEEE TRANSACTIONS ON ROBOTICS (2005)
Determination of the dynamic workspace of cable-driven planar parallel mechanisms
G Barrette et al.
JOURNAL OF MECHANICAL DESIGN (2005)
Design and workspace analysis of a 6-6 cable-suspended parallel robot
J Pusey et al.
MECHANISM AND MACHINE THEORY (2004)
A new 6-DOF parallel robotic structure actuated by wires: The WiRo-6.3
C Ferraresi et al.
JOURNAL OF ROBOTIC SYSTEMS (2004)
Design of reduced DOF parallel cable-based robots
S Behzadipour et al.
MECHANISM AND MACHINE THEORY (2004)
Elimination of force singularity of the cable and cabin structure for the next generation large radio telescope
YY Qiu et al.
MECHATRONICS (2002)
Multiple parameter continuation: Computing implicitly defined k-manifolds
ME Henderson
INTERNATIONAL JOURNAL OF BIFURCATION AND CHAOS (2002)
High-speed manipulation by using parallel wire-driven robots
S Kawamura et al.
ROBOTICA (2000)