Mechanism of capsid assembly for an icosahedral plant virus

Capsids of spherical viruses share a common architecture: an icosahedral arrangement of identical proteins. We suggest. that there may be a limited number of common assembly mechanisms for such viruses. Previous assembly mechanisms were proposed on the basis of virion structure but were not rigorously tested. Here we apply a rigorous analysis of assembly to cowpea chlorotic mottle virus (CCMV), a typical, small, positive-strand RNA virus. The atomic resolution structure of CCMV revealed an interleaving of subunits around the quasi-sixfold vertices, which suggested that capsid assembly was initiated by a hexamer of dimers (Speir er al., 1995, Structure 3, 63-78). However, we find that the capsid protein readily forms pentamers of dimers in solution, based on polymerization kinetics observed by light scattering. Capsid assembly is nucleated by a pentamer, determined from analysis of the extent of assembly by size-exclusion chromatography. Subsequent assembly likely proceeds by the cooperative addition of dimers, leading to the T = 3 icosahedral capsid. At high protein concentrations, the concentration-dependent nucleation reaction causes an overabundance of five-dimer nuclei that can be identified by classical light scattering. In turn these associate to form incomplete capsids and pseudo-T = 2 capsids, assembled by oligomerization of 12 pentamers of dimers. The experimentally derived assembly mechanisms of T = 3 and pseudo-T = 2 CCMV capsids are directly relevant to interpreting the structure and assembly of other T = 3 viruses such as Norwalk virus and pseudo-T = 2 viruses such as the vp3 core of blue tongue virus. (C) 2000 Academic Press.