Sol-gel preparation and characterization of Ag-TiO2 nanocomposite thin films

Ag-TiO2 thin films were prepared with a sol-gel route, using titanium isopropoxide and silver nitrate as precursors, at 0.03 and 0.06 Ag/Ti nominal atomic ratios. After drying at 80 degreesC, the films were fired at 300 degreesC and 500 degreesC for 30 min. The films were analysed by X-ray diffraction (XRD) with glancing angle, and X-ray photoelectron spectroscopy (XPS), with depth profiling of the concentration. XPS analysis showed the presence of C and N as impurities in the nanocomposite films. Their concentration decreased with increasing the firing temperature. Chemical state analysis showed that Ag was present in metallic state, except for the very outer layer where it was present as Ag+. For the films prepared with a Ag/Ti concentration of 0.06, depth profiling measurements of the film fired at 300 degreesC showed a strong Ag enrichment at the outer surface, while composition remained almost constant within the rest of the film, at 0.019. For the films heated to 500 degreesC, two layers were found, where the Ag/Ti ratios were 0.015 near the surface and 0.026 near the substrate.