A combined treatment approach using Fenton's reagent and zero valent iron for the removal of arsenic from drinking water

Studies on the development of an arsenic remediation approach using Fenton's reagent (H2O2 and Fe(II)) followed by passage through zero valent iron is reported. The efficiency of the process was investigated under various operating conditions. Potable municipal water and ground water samples spiked with arsenic(III) and (V) were used in the investigations. The arsenic content was determined by ICP-QMS. A HPLC-ICPMS procedure was used for the speciation and determination of both As(III) and (V) in the processed samples, to study the effectiveness of the oxidation step and the subsequent removal of the arsenic. The optimisation studies indicate that addition of 100 mul of H2O2 and 100mg of Fe(II) (as Ferrous ammonium sulphate) per litre of water for initial treatment followed by passing through zero valent iron, after a reaction time of 10 min, is capable of removing arsenic to lower than the US Environmental Protection Agency (EPA) guideline value of 10 mug/l, from a starting concentration of 2 mg/l of As(III). Using these suggested amounts, several experiments were carried out at different concentrations of As(III). Residual hydrogen peroxide in the processed samples can be eliminated by subsequent chlorination, making the water, thus, processed, suitable for drinking purposes. This approach is simple and cost effective for use at community levels. (C) 2001 Elsevier Science B.V. All rights reserved.