Fatigue behaviour and lifing of two single crystal superalloys

A model has been developed to predict the high temperature cyclic life of single crystal superalloys RR2000 and CMSX-4 under conditions of creep and fatigue. A combined creep-fatigue model is used, although it is found that failure always occurs by creep or fatigue separately, and that creep-fatigue interaction has a minor influence. Microstructural investigation of a series of interrupted high- and low-frequency tests are presented, these are combined with the results of a series of interrupted creep tests to identify the separate and interactive mechanisms of creep and fatigue. When creep damage is present the material behaves homogeneously. Under these conditions crack growth is initiation controlled, the mechanism of failure is surface or casting pore-initiated planar crack growth followed by shear on crystallographic planes. As the temperature is lowered or the cyclic frequency increased, the material behaves less homogeneously and shear bands are formed during cycling. Crack growth under these conditions is again initiation controlled and failure is by rapid crystallographic crack growth along shear bands. Such a failure is a distinct fatigue failure and occurs when little creep damage is present. Under certain cyclic conditions, mainly those where the crystallographic failure mechanism is dominant, the material shows an anomalous increase in fatigue resistance with temperature up to approximately 950 degreesC. This behaviour has been quantified by relating it to the effect of strain rate and temperature on the yield strength of the material.