The residual stress state due to a spherical hard-body impact

The current study assesses the residual stresses and remnant damage caused by a spherical projectile impacting upon a flat surface. The immediate application of this information is to the problem of foreign object damage (FOD) associated with the ingestion of debris into an aircraft turbine engine and the subsequent reduction in component lifetime. The work is focused on two primary features: (i) the development of numerical models for the evaluation of the deformation and stresses associated with the impact process and (ii) the use of spatially resolved residual stress measurements to verify experimentally the numerical analysis. As a first approximation, a quasi-static numerical model was developed by ignoring time-dependent effects (i.e., strain-rate sensitivity, wave and inertia effects, etc.), where the effects of velocity were approximated by adjusting the depth and diameter of the resulting impact crater to match that of actual impact craters at the corresponding velocity. The computed residual stresses and associated elastic strain gradients were compared to experimentally measured values, obtained using synchrotron X-ray diffraction (XRD) methods. This comparison indicated that the quasi-static numerical analysis was adequate for moderate impact conditions (velocity = 200 m/s, energy = 2.7 J); however, under more aggressive conditions (velocity = 300 m/s, energy = 6.1 J), there was significant discrepancy between the numerical predictions and experimental measurements. Such discrepancy may be attributed to several factors that can occur at higher impact velocities, including strain-rate sensitivity, microcrack formation, and shear-band formation. A dynamic simulation, where the time-dependent effects of strain-rate sensitivity and elastic-wave interactions were approximated, provided results in closer agreement with the experimental diffraction observations. (C) 2001 Published by Elsevier Science Ltd.