The effect of surface preparation on the bond interface between FRP sheets and concrete members

Fiber-reinforced polymer (FRP) composite wraps have been established as an effective method for rehabilitation and strengthening of concrete structures. They are being increasingly used as an alternative to steel for reinforcing and strengthening of concrete structures. This paper presents the experimental and analytical results of the influence of concrete surface treatment and the type of FRP sheets on the bonding strength of concrete-FRP sheet. The FRP sheets were bonded to concrete beams in two opposite sides using an epoxy resin. Variables included the type of fiber (C1, C5, and GE) and the surface treatment (water jet and sanding). With changing the surface treatment of concrete surface preparation and the type of fiber sheets, the bonding strength, bonding load-strain response and failure modes were investigated. The concrete specimens with surface roughened with water jet showed much better bonding strength than those roughened with an ordinary sander. Equations for predicting the bond load failure of concrete specimens externally bonded with carbon and glass fiber sheets compared well with those of experimental. (C) 2001 Elsevier Science Ltd. All rights reserved.