Subsolidus and melting phase relations of basaltic composition in the uppermost lower mantle

The phase relations and the element partitioning in a mid-oceanic ridge basalt composition were determined for both above-solidus and subsolidus conditions at 22 to 27.5 GPa by means of a multianvil apparatus. The mineral assemblage at the solidus changes remarkably with pressure; majorite and stishovite at 22 GPa, joined by Ca-perovskite at 23 GPa, further joined by CaAl4Si2O11-rich CAS phase at 25.5 GPa, and Mg-perovskite, stishovite, Ca-perovskite, CF phase (approximately on the join NaAlSiO4-MaAl(2)O(4)), and NAL phase ([Na,K,Ca](1)[Mg,Fe2+](2)[Al,Fe3+,Si](5.5-6.0)O-12) above 27 GPa. The liquidus phase is Ca-perovskite, and stishovite, a CAS phase, a NAL phase, Mg-perovskite, and a CF phase appear with decreasing temperature at 27.5 GPa. Partial melt at 27 to 27.5 GPa is significantly depleted in SiO2 and CaO and enriched in FeO and MgO compared with those formed at lower pressures, reflecting the narrow stability of (Fe,Mg)-rich phases (majorite or Mg-perovskite) above solidus temperature. The basaltic composition has a lower melting temperature than the peridotitic composition at high pressures except at 13 to 18 GPa (Yasuda et al., 1994) and therefore can preferentially melt in the Earth's interior. Recycled basaltic crusts were possibly included in hot Archean plumes, and they might have melted in the uppermost lower mantle. In this case, Ca-perovskite plays a dominant role in the trace element partitioning between melt and solid. This contrasts remarkably with the case of partial melting of a peridotitic composition in which magnesiowustite is the liquidus phase at this depth. Copyright (C) 2002 Elsevier Science Ltd.