Measurement of rock fracture toughness under modes I and II and mixed-mode conditions by using disc-type specimens

Rock fracture mechanics has been widely applied to blasting, hydraulic fracturing, mechanical fragmentation, rock slope analysis, geophysics, earthquake mechanics, hot dry rock geothermal energy extraction and many other practical problems. But a standard method to accurately determine fracture toughness of rocks, one of the most important parameters in fracture mechanics as an intrinsic property of rock, has not been yet well established. To obtain rock fracture toughness, disc-type specimens were used in this study. Rock fracture toughness under mixed-mode conditions was measured by using the straight-through crack assumption (STCA) applied to the cracked chevron-notched Brazilian disc (CCNBD) specimen and the semicircular bend (SCB) specimen. Size effects, in terms of specimen thickness, diameter and notch length on fracture toughness, were investigated. From the mixed-mode test results, fracture envelopes were obtained by applying various regression curves. The mixed-mode test results were also compared with the three well-known mixed-mode failure criteria. (C) 2002 Elsevier Science B.V. All rights reserved.