Measurement of soil-water characteristic curves for fine-grained soils using a small-scale centrifuge

Considerably long periods of time are required to measure soil-water characteristic curves using conventional equipment such as pressure plate apparatus or a Tempe cell. A commercially available, small-scale medical centrifuge with a swinging type rotor assembly was used to measure the soil-water characteristic curves on statically compacted, fine-grained soil specimens. A specimen holder was specially designed to obtain multiple sets of water content versus suction data for measuring the soil-water characteristic curve at a single speed of rotation of the centrifuge. The soil-water characteristic curves were measured for three different types of fine-grained soils. The three soils used in the study were processed silt (liquid limit, w(L) = 24%; plasticity index, I-p = 0; and clay = 7%), Indian Head till (w(L) = 35.5%, I-p = 17%, and clay = 30%), and Regina clay (w(L) = 75.5%, I-p = 21%, and clay = 70%). The soil-water characteristic curves for the above soils were measured in 0.5, 1, and 2 days, respectively, using the centrifuge technique for suction ranges from 0 to 600 kPa. Time periods of 2, 4-6, and 16 weeks were required for measuring the soil-water characteristic curves for the same soils using a conventional pressure plate apparatus. There is reasonably good agreement between the experimental results obtained by the centrifuge and the pressure plate methods. The results of this study are encouraging as soil-water characteristic curves can be measured in a reduced time period when using a small-scale centrifuge.