The Mw 8.2, 17 February 1996 Biak, Indonesia, earthquake:: Rupture history, aftershocks, and fault plane properties -: art. no. 2312

[1] We analyze the rupture history of this earthquake, the largest thrust earthquake since 1977, primarily using broadband SH wave seismograms. We show that the earthquake occurred on a shallow dipping thrust fault (strike 109degrees, dip 9degrees, rake 72degrees) with a seismic moment of 2.7 x 10(21) N m. The rupture propagated bilaterally at an average speed of similar to 90% of the shear wave speed, on a fault extending 180 km west and 50 km east of the hypocenter, with very variable width ranging from 30 to 100 km at different locations along strike. The mean slip over a 230 km x 100 km fault area was 4 m and the mean stress drop 1.9 MPa. The slip distribution is very nonuniform over the fault, with the largest slip of similar to12 m being near the hypocentral depth (similar to10 km). The rupture is very complex, propagating first to the west and then, after a similar to15-s delay, to the east. We interpret this delay as being due to the existence of a inhomogeneous barrier just east of the hypocenter, which initially acted as a barrier to rupture propagation toward the east, but subsequently failed due to stress increase on it generated by the rupture to its west and with the rupture then continuing to propagate eastward. This barrier acted as a stress concentrator before the earthquake, giving rise to foreshocks and was also the initiator of rupture for this earthquake. The aftershock zone closely corresponds to the region in which rupture occurred, the area with greatest aftershock density lying entirely within the area of highest moment release.