4.7 Article

Hardness and toughness of hot pressed ZrB2-SiC composites consolidated under relatively low pressure

期刊

JOURNAL OF ALLOYS AND COMPOUNDS
卷 619, 期 -, 页码 481-487

出版社

ELSEVIER SCIENCE SA
DOI: 10.1016/j.jallcom.2014.09.006

关键词

Composite materials; Sintering; Mechanical properties; Scanning electron microscopy; Metallography; Microstructure

资金

  1. Advanced Ceramic Research Group, University of Tabriz, Iran

向作者/读者索取更多资源

ZrB2-based composites, containing 15, 20, 25, and 30 vol% SiC, have been prepared by hot pressing at temperatures of 1700, 1850 and 2000 degrees C for 30 min under a relatively low pressure of 10 MPa. Densification and mechanical properties of ZrB2-SiC composites have been investigated. Fully dense ZrB2-30 vol% SIC composite with a relative density of 99.8% is obtained at 2000 degrees C. The highest values of Vickers hardness (21.3 GPa) and fracture toughness (4.7 MPa m(1/2)) belong to this sample. Vickers hardness increases exponentially as the relative density of composite increases. A simplified equation was developed for the Vickers hardness of the investigated ZrB2-SiC composites as a function of relative density and SiC content. Microstructural investigation by means of optical and scanning electron microscopy shows that by addition of SiC particles, some toughening mechanisms such as crack deflection, crack branching, microcracking, crack bridging, break of large SiC grains, and crack arresting by porosity are appeared. (C) 2014 Elsevier B.V. All rights reserved.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据