Polymerization compounding composites of nylon-6,6/short glass fiber

Nylon-6,6 was grafted onto the surface of short,glass fibers through the sequential reaction of adipoyl chloride and hexamethylenediamine onto the fiber surface. Grafted and unsized short glass fibers (USGF) were used to prepare composites with nylon-6,6 via melt blending. The glass fibers were found to act as nucleating agents for the nylon-6,6 matrix. Grafted glass fiber composites have higher crystallization temperatures than USGF composites, indicating that grafted nylon-6,6 molecules further increase crystallization rate of composites. Grafted glass fiber composites were also found to have higher tensile strength, tensile modulus, dynamic storage modulus, and melt viscosity than USGF composites. Property enhancement is attributed to improved wetting and interactions between the nylon-6,6 matrix and the modified surface of glass fibers, which is supported by scanning. electron microscopy (SEM) analysis. The glass transition (tan delta) temperatures extracted from dynamic mechanical analysis (DMA) are found to be unchanged for USGF, while in the case of grafted glass fiber, tan delta increases with increasing glass fiber contents. Moreover, the peak values (i.e., intensity) of tan 8 are slightly lower for grafted glass fiber composites than for USGF composites, further indicating improved interactions between the grafted glass fibers and nylon-6,6 matrix. The Halpin-Tsai and modified Kelly-Tyson models were used to predict the tensile modulus and tensile strength, respectively.