Biological treatments affect the chemical composition of coffee pulp

Biological treatments were applied to fresh coffee pulp (CoP) to improve its nutritive value for monogastric animals by reducing its content of cellulose and antinutritional factors (ANFs) such as total phenols, tannins and caffeine. Treatments were: (1) ensiling with 0, 50 and 100 g kg(-1) molasses for 2 and 3 months, (2) aerobic decomposition for 0, 7, 14, 21, 28, 35 and 42 days, (3) aerobic bacterial inoculation (Bacillus sp.) for 0, 7, 14, 21 and 28 days. Ensiled CoP (E-CoP) showed higher fat and ash contents than oven-dried-CoP (OD-CoP; P < 0.05). Similarly, true protein values tended to increase. The cellulose and total phenols levels of E-CoP were lower than OD-CoP (P < 0.05). The E-CoP tannins levels tended to be lower than OD-CoP whereas caffeine levels remained unaffected. Improvement in the nutritional quality of E-CoP was associated with higher fat and protein contents and reduction of cellulose, total phenols and tannins. The aerobic decomposition treatment improved the nutritional quality of CoP by increasing true protein and fat contents. In addition, total phenols, tannins, caffeine and cellulose contents were reduced by an increase in treatment time (P < 0.05). Bacterial treatment increased the protein content of CoP after 21 days (from 137 to 392 g kg(-1)) and decreased it after 28 days. Cellulose, total phenols, tannins and caffeine contents reduced with an increase in time of bacterial degradation. Bacterial treatment improved the CoP quality by increasing protein content and reducing cellulose and ANFs, especially after 21 days of treatment. Both the aerobic decomposition (after 21-28 days) and the aerobic bacterial degradation of CoP (after 21 days) appeared more suitable to improve the nutritional quality of CoP than the ensiling. (C) 2003 Elsevier Science Ltd. All rights reserved.