Crashworthy characteristics of axially statically compressed thin-walled square CFRP composite tubes: experimental

In this paper the results of experimental works pertaining to the crash behaviour, collapse modes and crashworthiness characteristics of carbon fibre reinforced plastic (CFRP) tubes that were subjected to static axial compressive loading are presented in detail. The tested specimens were featured by a material combination of carbon fibres in the form of reinforcing woven fabric in thermosetting epoxy resin, and they were cut at various lengths from three CFRP tubes of the same square cross-section but different thickness, laminate stacking sequence and fibre volume content. CFRP tubes were compressed in a hydraulic press of 1000 kN loading capacity at very low-strain rate typical for static testing. The influence of the most important specimen geometric features such as the tube axial length, aspect ratio and wall thickness on the compressive response and collapse modes of the tested tubes is thoroughly analysed. In addition, the effect of the laminate material properties such as the fibre volume content and stacking sequence on the energy absorbing capability of the thin-wall tubes is also examined. Particular attention is paid on the analysis of the mechanics of the tube axial collapse modes from macroscopic and microscopic point of view, emphasizing on the mechanisms related to the crash energy absorption during the compression of the composite tubes. (C) 2003 Elsevier Ltd. All rights reserved.