Reversal of enantioselectivity in the hydroformylation of styrene with [2S,4S-BDPP]Pt(SnCl3)Cl at high temperature arises from a change in the enantioselective-determining step

Deuterioformylation of styrene catalyzed by [(2S,4S)-BDPP]Pt(SnCl3)Cl at 39 degreesC gave 3-phenylpropanal (3) and 2-phenylpropanal (2) (n:i = 1.8, 71% ee (S)-2) with deuterium only beta to the aldehyde carbonyl and in the formyl group. Small amounts of deuterium were also found in the internal (2.8%), cis terminal (1.4%), and trans terminal (1.3%) vinyl positions of the recovered styrene. Deuterioformylation of styrene at 98 degreesC gave 3- (3) and 2-phenylpropanal (2) (n:i = 2.3, 10% ee (R)-2) with deuterium both alpha and beta to the aldehyde carbonyl and in the formyl group. Deuterium was also found in the internal (20%), cis terminal (12%), and trans terminal (12%) vinyl positions of the recovered styrene. These deuterioformylation results establish that platinum hydride addition to styrene is largely irreversible at 39 degreesC but reversible at 98 degreesC. Hydroformylation of (E)- and (Z)-beta-deuteriostyrene at 40 degreesC, followed by oxidation of the aldehydes to acids, and subsequent derivitization to the (S)-mandelate esters confirmed that 84% of 2-phenylpropanal (2) arises from platinum hydride addition to the si-face of styrene, while 73% of 3-phenylpropanal (3) arises from platinum hydride addition to the re-face of styrene. At 100 degreesC, the effect of variable H-2 and CO pressure on n:i, % ee, and TOF of hydroformylation of styrene was investigated. The results are consistent with enantioselectivity not being fully determined until the final hydrogenolysis of a platinum acyl intermediate.