期刊
APPLIED THERMAL ENGINEERING
卷 50, 期 1, 页码 763-770出版社
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.applthermaleng.2012.06.049
关键词
Cu-distilled water nanofluids; Cylindrical heat pipes; Screen mesh wick; Thermal resistance; Nanoparticle coating layer
Fairly stable surfactant free copper-distilled water nanofluids are prepared using prolonged sonication and homogenization. Thermal conductivity of the prepared nanofluid displays a maximum enhancement of similar to 15% for 0.5 wt% of Cu loading in distilled water at 30 degrees C. The wall temperature distributions and the thermal resistances between the evaporator and the condenser sections of a commercial screen mesh wick heat pipe containing nanofluids are investigated for three different angular position of the heat pipe. The results are compared with those for the same heat pipe with water as the working fluid. The wall temperatures of the heat pipes decrease along the test section from the evaporator section to the condenser section and increase with input power. The average evaporator wall temperatures of the heat pipe with nanofluids are much lower than those of the heat pipe with distilled water. The thermal resistance of the heat pipe using both distilled water and nanofluids is high at low heat loads and reduces rapidly to a minimum value as the applied heat load is increased. The thermal resistance of the vertically mounted heat pipe with 0.5 wt% of Cu-distilled water nanofluid is reduced by similar to 27%. The observed enhanced thermal performance is explained in light of the deposited Cu layer on the screen mesh wick in the evaporator section of the heat pipe. (C) 2012 Elsevier Ltd. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据