期刊
SENSORS AND ACTUATORS A-PHYSICAL
卷 114, 期 2-3, 页码 276-284出版社
ELSEVIER SCIENCE SA
DOI: 10.1016/j.sna.2003.12.029
关键词
diagnosis systems; microneedle; microfluid chip; PDMS
This paper reports an in-plane single-crystal-silicon microneedle array, its mechanical safety, its integration with a polydimethylsiloxane (PDMS) microfluid chip, as well as in vitro and ex vivo test results. The fabricated microneedle arrays have buried microchannels, which are fabricated by using the processes of anisotropic dry etching, isotropic dry etching, and trench-refilling. The microchannel diameter is about 20 mum. Several needle dimensions and shapes were investigated, and the microneedle shape was optimized using mechanical strength analysis. A 100 mum wide, 100 mum thick, and 2 mm long microneedle shaft with the tip taper angle 30degrees and the isosceles triangle tip shape is strong enough to endure 0.248 mN m of out-of-plane bending moment and 6.28 N of in-plane buckling load. Then, the microneedle array is integrated with a PDMS microfluid chip. The microneedle integrated microfluid chip is tested in vitro, by injecting black ink into a methanol-filled petridish, and Rhodamine B dye into 1% agarose gel through microchannels of the integrated microneedle. The integrated microfluid chip is also tested ex vivo, by injecting Rhodamine B dye into a chicken breast flesh. In this ex vivo test, the penetration force was measured. For the optimized microneedle shaft, the penetration force was 80.9 mN, and this force is less than 1.3% of the buckling force, which is 6.28 N. (C) 2004 Published by Elsevier B.V.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据