Benzo[a]pyrene imprinted polymers: synthesis, characterization and SPE application in water and coffee samples

In the present work, six kinds of molecularly imprinted polymers (MIPs) or microspheres (MIMs) were firstly synthesized by bulk polymerization and aqueous micro-suspension polymerization using benzo[a]pyrene (BAP) as imprinting molecule. Three monomers and two cross-linkers were investigated. The MIPs or MIMs obtained were subsequently characterized in detail with rebinding investigation, solid-phase extraction (SPE) and liquid chromatography (HPLC). All the results indicate that the polarity of both monomer and cross-linker play an important role for affinity and retention behaviour. The affinities of the polymers to BAP increased with the decreasing polarity of monomer and cross-linker. ne rebinding results demonstrate that the affinity order is 4-VP-co-DVB > 4-VP-co-EDMA > MAA-co-DVB > TFMAA-co-DVB. The HPLC results also indicate that the retention time of BAP on 4-VP-co-DVB and 4-VP-co-EDMA columns is much different (18.02 min versus 10.89 min) and that it needs a more apolar mobile phase for the former (ACN-DCM, 80:20, v/v versus ACN-water, 80:20, v/v). The selectivity of the imprinted 4-VP-co-DVB column to BAP and its homologous is much better than that of the 4-VP-co-EDMA column (IFBAP 8.44 versus 1.34). In this case, it is illustrated that the cross-linker is much more important than the monomer, and that the hydrophobic interaction and pi-pi interaction between analytes and the MIP-HPLC column play a key role in the retention process. The 4-VP-co-DVB column was employed to enrich BAP from tap water, lake water and instant coffee samples which were spiked at low ppb levels without any sample pretreatment apart from filtration. The recoveries were 96.5 +/- 3.2%, 84.7 +/- 6.6%, and 72.5 +/- 4.8% (n = 3), respectively. (C) 2004 Published by Elsevier B.V.