Influence of elevated temperatures on the mechanical properties of blended cement concretes prepared with limestone and siliceous aggregates

The investigation performed was aimed at showing the influence of high temperatures on the mechanical properties and properties that affect the measurement by non-destructive methods (rebound hammer and pulse velocity) of concrete containing various levels (10% and 30%) of pozzolanic materials. Three types of Pozzolans, one natural pozzolan and two lignite fly ashes (one of low and the other of high lime content) were used for cement replacement. Two series of mixtures were prepared using limestone and siliceous aggregates. The W/b and the cementitius material content were maintained constant for all the mixtures. Concrete specimens were tested at 100, 300, 600 and 750 degreesC for 2 h without any imposed load. and under the same heating, regime. At the age of 3 years, tests of compressive strength, modulus of elasticity, rebound hummer and pulse velocity were come out. Results indicate that the residual properties of concrete strongly depend on the aggreggates' and the binder type. Relationships between strength of concrete as well as rebound and pulse velocity versus heating temperatures are established. The above results are evaluated to establish a direct relationship between non-destructive measurements and compressive strength of concrete exposed to fire. (C) 2004 Published by Elsevier Ltd.