Comparative study on density gradients and swim-up preparation techniques utilizing neat and cryopreserved spermatozoa

Aim: To 1) compare post-wash and post-thaw parameters of sperm processed with PureSperm density gradient technique and swim-up method; and 2) test the efficacy of two commonly available density gradient media PureSperm and ISolate. Methods: This prospective study used semen specimens from 22 patients. Specimens from nine patients were processed by both PureSperm density gradient and swim-up method. These specimens were then cryopreserved. Thirteen specimens were processed by both PureSperm (40% and 80%) and Isolate (50% and 90%) double density gradient techniques. The two fractions processed by both PureSperm and swim-up were analyzed for post-wash sperm characteristics. Post-thaw analysis was done after 24 hours. Sperm fractions obtained after processing with PureSperm and ISolate were compared for post-wash sperm characteristics and ROS levels. Results: Specimens prepared with PureSperm had significantly higher median total motile sperm counts (TMSC) (32.2 x 10(6) vs. 17.6 x 10(6)), recovery rates (69.2% vs. 50.0%), and longevity at 4 hours (83.0% vs. 55.0%) compared to specimen prepared by swim-up. Post-thaw specimens also had a higher recovery and longevity at 4 hours with PureSperm as compared to the swim-up. Semen specimens processed by PureSperm had significantly higher total sperm count, TMSC, and percentage recovery rates (30.0% vs. 19.7%) than ISolate. Conclusion: Semen quality is better preserved in fresh and cryopreserved semen prepared with PureSperm density gradient compared to swim-up. A significant enrichment of sperm is observed with PureSperm compared to ISolate. Higher recovery rates of mature motile sperm obtained after PureSperm sperm preparation may be beneficial for successful ART.