相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Bio-ink for on-demand printing of living cells
Cameron J. Ferris et al.
BIOMATERIALS SCIENCE (2013)
A Quantitative Metric for Pattern Fidelity of Bioprinted Cocultures
Matthew E. Pepper et al.
ARTIFICIAL ORGANS (2012)
PLGA/hydrogel biopapers as a stackable substrate for printing HUVEC networks via BioLP (TM)
Russell Kirk Pirlo et al.
BIOTECHNOLOGY AND BIOENGINEERING (2012)
Improving piezoelectric cell printing accuracy and reliability through neutral buoyancy of suspensions
Daljeet Chahal et al.
BIOTECHNOLOGY AND BIOENGINEERING (2012)
Skin tissue generation by laser cell printing
Lothar Koch et al.
BIOTECHNOLOGY AND BIOENGINEERING (2012)
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Jordan S. Miller et al.
NATURE MATERIALS (2012)
Printing and Prototyping of Tissues and Scaffolds
Brian Derby
SCIENCE (2012)
Designing Cell-Compatible Hydrogels for Biomedical Applications
Dror Seliktar
SCIENCE (2012)
Layer-by-Layer Tissue Microfabrication Supports Cell Proliferation In Vitro and In Vivo
Sylvain Catros et al.
TISSUE ENGINEERING PART C-METHODS (2012)
Characterizing the effects of cell settling on bioprinter output
Matthew E. Pepper et al.
BIOFABRICATION (2012)
Toward engineering functional organ modules by additive manufacturing
Francoise Marga et al.
BIOFABRICATION (2012)
Vascularization is the key challenge in tissue engineering
Esther C. Novosel et al.
ADVANCED DRUG DELIVERY REVIEWS (2011)
The maintenance of pluripotency following laser direct-write of mouse embryonic stem cells
Nurazhani Abdul Raof et al.
BIOMATERIALS (2011)
Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration
Ralf Gaebel et al.
BIOMATERIALS (2011)
A three-dimensional in vitro ovarian cancer coculture model using a high-throughput cell patterning platform
Feng Xu et al.
BIOTECHNOLOGY JOURNAL (2011)
Rapid prototyping of tubular polyurethane and cell/hydrogel constructs
Kai He et al.
JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS (2011)
Direct-write bioprinting three-dimensional biohybrid systems for future regenerative therapies
Carlos C. Chang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2011)
Laser-assisted bioprinting to deal with tissue complexity in regenerative medicine
Fabien Guillemot et al.
MRS BULLETIN (2011)
Drop-on-Demand Single Cell Isolation and Total RNA Analysis
Sangjun Moon et al.
PLOS ONE (2011)
Inkjet printing and cell seeding thermoreversible photocurable gel structures
Manuela Di Biase et al.
SOFT MATTER (2011)
Scaffold Porosity and Oxygenation of Printed Hydrogel Constructs Affect Functionality of Embedded Osteogenic Progenitors
Natalja E. Fedorovich et al.
TISSUE ENGINEERING PART A (2011)
Distinct Tissue Formation by Heterogeneous Printing of Osteo- and Endothelial Progenitor Cells
Natalja E. Fedorovich et al.
TISSUE ENGINEERING PART A (2011)
Laser Printing of Stem Cells for Biofabrication of Scaffold-Free Autologous Grafts
Martin Gruene et al.
TISSUE ENGINEERING PART C-METHODS (2011)
Organ printing: the future of bone regeneration?
Natalja E. Fedorovich et al.
TRENDS IN BIOTECHNOLOGY (2011)
Cell patterning technologies for organotypic tissue fabrication
Bertrand Guillotin et al.
TRENDS IN BIOTECHNOLOGY (2011)
Laser-guidance-based cell deposition microscope for heterotypic single-cell micropatterning
Zhen Ma et al.
BIOFABRICATION (2011)
Three-dimensional inkjet biofabrication based on designed images
Kenichi Arai et al.
BIOFABRICATION (2011)
Microengineering methods for cell-based microarrays and high-throughput drug-screening applications
Feng Xu et al.
BIOFABRICATION (2011)
Bioprinting of hybrid tissue constructs with tailorable mechanical properties
W. Schuurman et al.
BIOFABRICATION (2011)
Development of a hybrid scaffold with synthetic biomaterials and hydrogel using solid freeform fabrication technology
Jin-Hyung Shim et al.
BIOFABRICATION (2011)
Laser-assisted bioprinting for creating on-demand patterns of human osteoprogenitor cells and nano-hydroxyapatite
Sylvain Catros et al.
BIOFABRICATION (2011)
One Cell-One Well: A New Approach to Inkjet Printing Single Cell Microarrays
Albert R. Liberski et al.
ACS COMBINATORIAL SCIENCE (2011)
Controlled Positioning of Cells in Biomaterials-Approaches Towards 3D Tissue Printing
Silke Wust et al.
JOURNAL OF FUNCTIONAL BIOMATERIALS (2011)
High-throughput laser printing of cells and biomaterials for tissue engineering
F. Guillemot et al.
ACTA BIOMATERIALIA (2010)
Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
Brian Derby
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Cell Damage Evaluation of Thermal Inkjet Printed Chinese Hamster Ovary Cells
Xiaofeng Cui et al.
BIOTECHNOLOGY AND BIOENGINEERING (2010)
Cell encapsulation using biopolymer gels for regenerative medicine
Nicola C. Hunt et al.
BIOTECHNOLOGY LETTERS (2010)
Time-resolved study of polyimide absorption layers for blister-actuated laser-induced forward transfer
Matthew S. Brown et al.
JOURNAL OF APPLIED PHYSICS (2010)
Three dimensional multi-scale modelling and analysis of cell damage in cell-encapsulated alginate constructs
Karen Chang Yan et al.
JOURNAL OF BIOMECHANICS (2010)
Building off-the-shelf tissue-engineered composites
Timothy Burg et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2010)
Recent Trends and Challenges in Complex Organ Manufacturing
Xiaohong Wang et al.
TISSUE ENGINEERING PART B-REVIEWS (2010)
Layer by Layer Three-Dimensional Tissue Epitaxy by Cell-Laden Hydrogel Droplets
SangJun Moon et al.
TISSUE ENGINEERING PART C-METHODS (2010)
Effects of surfactant and gentle agitation on inkjet dispensing of living cells
Shabnam Parsa et al.
BIOFABRICATION (2010)
A droplet-based building block approach for bladder smooth muscle cell (SMC) proliferation
F. Xu et al.
BIOFABRICATION (2010)
Bioprinting is coming of age: report from the International Conference on Bioprinting and Biofabrication in Bordeaux (3B'09)
Fabien Guillemot et al.
BIOFABRICATION (2010)
Laser printing of cells into 3D scaffolds
A. Ovsianikov et al.
BIOFABRICATION (2010)
Tissue engineering by self-assembly and bio-printing of living cells
Karoly Jakab et al.
BIOFABRICATION (2010)
Laser-based direct-write techniques for cell printing
Nathan R. Schiele et al.
BIOFABRICATION (2010)
Hydrogels in Regenerative Medicine
Brandon V. Slaughter et al.
ADVANCED MATERIALS (2009)
Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication
Wonhye Lee et al.
BIOMATERIALS (2009)
Human microvasculature fabrication using thermal inkjet printing technology
Xiaofeng Cui et al.
BIOMATERIALS (2009)
Scaffold-free vascular tissue engineering using bioprinting
Cyrille Norotte et al.
BIOMATERIALS (2009)
Organ printing: Tissue spheroids as building blocks
Vladimir Mironov et al.
BIOMATERIALS (2009)
Characterization of cell viability during bioprinting processes
Kalyani Nair et al.
Biotechnology Journal (2009)
Direct Fabrication of a Hybrid Cell/Hydrogel Construct by a Double-nozzle Assembling Technology
Shengjie Li et al.
JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS (2009)
Controlled Adipose-derived Stromal Cells Differentiation into Adipose and Endothelial Cells in a 3D Structure Established by Cell-assembly Technique
Mingen Xu et al.
JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS (2009)
Development of a Three-Dimensional Bioprinter: Construction of Cell Supporting Structures Using Hydrogel and State-Of-The-Art Inkjet Technology
Yuichi Nishiyama et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2009)
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Saif Khalil et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2009)
EDTA enhances high-throughput two-dimensional bioprinting by inhibiting salt scaling and cell aggregation at the nozzle surface
Cheryl A. Parzel et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2009)
Three-dimensional bioprinting of rat embryonic neural cells
Wonhye Lee et al.
NEUROREPORT (2009)
Blended PCL/PLGA scaffold fabrication using multi-head deposition system
Jong Young Kim et al.
MICROELECTRONIC ENGINEERING (2009)
Human Cell Chips: Adapting DNA Microarray Spotting Technology to Cell-Based Imaging Assays
Traver Hart et al.
PLOS ONE (2009)
Location, Location, Location INTRODUCTION
Stella Hurtley
SCIENCE (2009)
Inkjet-Mediated Gene Transfection into Living Cells Combined with Targeted Delivery
Tao Xu et al.
TISSUE ENGINEERING PART A (2009)
Vascularization Strategies for Tissue Engineering
Michael Lovett et al.
TISSUE ENGINEERING PART B-REVIEWS (2009)
Vascularization-The Conduit to Viable Engineered Tissues
Tamar Kaully et al.
TISSUE ENGINEERING PART B-REVIEWS (2009)
High-throughput cellular microarray platforms: applications in drug discovery, toxicology and stem cell research
Tiago G. Fernandes et al.
TRENDS IN BIOTECHNOLOGY (2009)
Biofabrication: a 21st century manufacturing paradigm
V. Mironov et al.
BIOFABRICATION (2009)
Fabrication and characterization of bio-engineered cardiac pseudo tissues
Tao Xu et al.
BIOFABRICATION (2009)
On-chip, cell-based microarray immunofluorescence assay for high-throughput analysis of target proteins
Tiago G. Fernandes et al.
ANALYTICAL CHEMISTRY (2008)
A review of rapid prototyping techniques for tissue engineering purposes
Sanna M. Peltola et al.
ANNALS OF MEDICINE (2008)
Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
Rachel E. Saunders et al.
BIOMATERIALS (2008)
Single-cell printing to form three-dimensional lines of olfactory ensheathing cells
Christina M. Othon et al.
BIOMEDICAL MATERIALS (2008)
Rheological properties of cell-hydrogel composites extruding through small-diameter tips
Jie Cheng et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Characterization of cell constructs generated with inkjet printing technology using in vivo magnetic resonance imaging
Tao Xu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)
High-throughput production of single-cell microparticles using an inkjet printing technology
Tao Xu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures
Brian Derby
JOURNAL OF MATERIALS CHEMISTRY (2008)
Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing
Natalja E. Fedorovich et al.
TISSUE ENGINEERING PART A (2008)
Effects of dispensing pressure and nozzle diameter on cell survival from solid freeform fabrication-based direct cell writing
Robert Chang et al.
TISSUE ENGINEERING PART A (2008)
Tissue engineering by self-assembly of cells printed into topologically defined structures
Karoly Jakab et al.
TISSUE ENGINEERING PART A (2008)
Cell encapsulation in biodegradable hydrogels for tissue engineering applications
Garret D. Nicodemus et al.
TISSUE ENGINEERING PART B-REVIEWS (2008)
Vascularization in tissue engineering
Jeroen Rouwkema et al.
TRENDS IN BIOTECHNOLOGY (2008)
Three-dimensional cellular microarray for high-throughput toxicology assays
Moo-Yeal Lee et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2008)
Rapid prototyping as a tool for manufacturing bioartificial livers
Xiaohong Wang et al.
TRENDS IN BIOTECHNOLOGY (2007)
Hydrogels as extracellular matrices for skeletal tissue engineering: state-of-the-art and novel application in organ printing
Natalja E. Fedorovich et al.
TISSUE ENGINEERING (2007)
Tissue engineering with the aid of inkjet printers
Phil G. Campbell et al.
EXPERT OPINION ON BIOLOGICAL THERAPY (2007)
Rapid prototyping three-dimensional cell/gelatin/fibrinogen constructs for medical regeneration
Wei Xu et al.
JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS (2007)
Biopolyrner deposition for freefonn fabrication of hydrogel tissue constructs
Saif Khalil et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2007)
Drop-on-demand printing of cells and materials for designer tissue constructs
Thomas Boland et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2007)
Characterizing environmental factors that impact the viability of tissue-engineered constructs fabricated by a direct-write bioassembly tool
Cynthia M. Smith et al.
TISSUE ENGINEERING (2007)
Rational design of hydrogels for tissue engineering: Impact of physical factors on cell behavior
Ferdinand Brandl et al.
BIOMATERIALS (2007)
Cell encapsulating droplet vitrification
Utkan Demirci et al.
LAB ON A CHIP (2007)
Laser microfabrication of hydroxyapatite-osteoblast-like cell composites
A. Doraiswamy et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Bioprinting living structures
Vladimir Mironov et al.
JOURNAL OF MATERIALS CHEMISTRY (2007)
Bioresponsive hydrogels
Rein V. Ulijn et al.
MATERIALS TODAY (2007)
Electrospinning of polymeric nanofibers for tissue engineering applications: A review
Quynh P. Pham et al.
TISSUE ENGINEERING (2006)
Bioprinting: A beginning
Vladimir Mironov et al.
TISSUE ENGINEERING (2006)
Generation of three-dimensional hepatocyte/gelatin structures with rapid prototyping system
XH Wang et al.
TISSUE ENGINEERING (2006)
Biocompatible inkjet printing technique for designed seeding of individual living cells
M Nakamura et al.
TISSUE ENGINEERING (2005)
Laser-guided direct writing for three-dimensional tissue engineering
Y Nahmias et al.
BIOTECHNOLOGY AND BIOENGINEERING (2005)
Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique
YN Yan et al.
BIOMATERIALS (2005)
Biomaterial microarrays: rapid, microscale screening of polymer-cell interaction
DG Anderson et al.
BIOMATERIALS (2005)
Direct construction of a three-dimensional structure with cells and hydrogel
YN Yan et al.
JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS (2005)
Laser printing of single cells: Statistical analysis, cell viability, and stress
JA Barron et al.
ANNALS OF BIOMEDICAL ENGINEERING (2005)
An extracellular matrix microarray for probing cellular differentiation
CJ Flaim et al.
NATURE METHODS (2005)
Multi-nozzle deposition for construction of 3D biopolymer tissue scaffolds
S Khalil et al.
RAPID PROTOTYPING JOURNAL (2005)
Inkjet printing of viable mammalian cells
T Xu et al.
BIOMATERIALS (2005)
Application of laser printing to mammalian cells
JA Barron et al.
THIN SOLID FILMS (2004)
Engineering biological structures of prescribed shape using self-assembling multicellular systems
K Jakab et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2004)
Laser printing of pluripotent embryonal carcinoma cells
BR Ringeisen et al.
TISSUE ENGINEERING (2004)
Computer-aided tissue engineering: overview, scope and challenges
W Sun et al.
BIOTECHNOLOGY AND APPLIED BIOCHEMISTRY (2004)
Three-dimensional tissue fabrication
VL Tsang et al.
ADVANCED DRUG DELIVERY REVIEWS (2004)
Rapid prototyping in tissue engineering: challenges and potential
WY Yeong et al.
TRENDS IN BIOTECHNOLOGY (2004)
Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems
DW Hutmacher et al.
TRENDS IN BIOTECHNOLOGY (2004)
Nanoliter-scale synthesis of arrayed biomaterials and application to human embryonic stem cells
DG Anderson et al.
NATURE BIOTECHNOLOGY (2004)
Biological laser printing: A novel technique for creating heterogeneous 3-dimensional cell patterns
JA Barron et al.
BIOMEDICAL MICRODEVICES (2004)
Hydrogels for tissue engineering: scaffold design variables and applications
JL Drury et al.
BIOMATERIALS (2003)
Minimally invasive tissue engineering composites and cell printing
KJL Burg et al.
IEEE ENGINEERING IN MEDICINE AND BIOLOGY MAGAZINE (2003)
Cell and organ printing 2: Fusion of cell aggregates in three-dimensional gels
T Boland et al.
ANATOMICAL RECORD PART A-DISCOVERIES IN MOLECULAR CELLULAR AND EVOLUTIONARY BIOLOGY (2003)
Cell and organ printing 1: Protein and cell printers
WC Wilson et al.
ANATOMICAL RECORD PART A-DISCOVERIES IN MOLECULAR CELLULAR AND EVOLUTIONARY BIOLOGY (2003)
Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs
KF Leong et al.
BIOMATERIALS (2003)
Drop-on-demand printing of protein biochip arrays
FG Zaugg et al.
MRS BULLETIN (2003)
Generation of mesoscopic patterns of viable Escherichia coli by ambient laser transfer
BR Ringeisen et al.
BIOMATERIALS (2002)
The deposition, structure, pattern deposition, and activity of biomaterial thin-films by matrix-assisted pulsed-laser evaporation (MAPLE) and MAPLE direct write
PK Wu et al.
THIN SOLID FILMS (2001)
Hydrogels for tissue engineering
KY Lee et al.
CHEMICAL REVIEWS (2001)
分享论文
