期刊
THIN SOLID FILMS
卷 475, 期 1-2, 页码 45-48出版社
ELSEVIER SCIENCE SA
DOI: 10.1016/j.tsf.2004.07.070
关键词
TaN; sputtering; lamellar; stress; hardness
The effect of crystal orientation and microstructure on the mechanical properties of TaN, was investigated. TAN, films were grown on a SiO2 substrate by ultrahigh vacuum unbalanced magnetron sputter deposition in mixed Ar/N-2 discharges at 20 mTorr (2.67 Pa) and at 350 degreesC. Unlike the Ti-N system, in which TiN is the terminal phase, a large number of N-rich phases in the Ta-N system could lead to layers which had self-organized nanosized lamella structure of coherent cubic and hexagonal phases, with a correct choice of nitrogen fraction in the sputtering mixture and ion irradiation energy during growth. The preferred orientations and the microstructure of TaNx layers were controlled by varying incident ion energy E-i (=30 50 eV) and nitrogen fractions f(N2), (=0.1-0.15). TaNx layers were grown on (0002)-Ti underlayer as a crystallographic template in order to relieve the stress on the films. The structure of the TaNx film transformed from Bl-NaCl delta-TaNx to lamellar structured Bl-NaCl delta-TaNx+hexagonal epsilon-TAN(x) or Bl-NaCl delta-TAN(x)+hexagonal gamma-TaNx with increasing ion energy at the same nitrogen fraction f(N2). The hardness of the films also increased by the structural change. At the nitrogen fraction of 0.1-0.125, the structure of the TaNx films was changed from delta-TAN(x)+epsilon-TaNx to delta-TaNx+gamma-TaNx with increasing ion energy. However, at the nitrogen fraction of 0.15, the film structure did not change from delta-TaNx+epsilon-TaNx over the whole range of the applied ion energy. The hardness increased significantly from 21.1 to 45.5 GPa with increasing ion energy. (C) 2004 Published by Elsevier B.V.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据